Thanks for all the info guys.. I will be doing some testing this weekend on my BFG OC to see what stock vgpu and vmem are and seeing if i cant grab an extra few mhz from this.....
Thanks for all the info guys.. I will be doing some testing this weekend on my BFG OC to see what stock vgpu and vmem are and seeing if i cant grab an extra few mhz from this.....
i7-950 @ 4.24 | XPSC Rasa - MCP655 - RX240 | EVGA X58 SLI LE | 3 x 2GB Mushkin 1600 6-8-6-20 @ 1475 |
EVGA GTX470 @ 825/1650/1750 w/VF3000F | Antec TruePower NEW TP750 | HAF 932
edit.. i found the vgpu 1.18 load, and 1.09 idle with it downclocked...
thanks
It appears that on my BFG OC version pins 1/3/11 are already bridged as well. So Id like to see what I get by bridging 2/4. are there any other combo's that may help?
Also, does anyone know a chain store for a conductive pen? Im getting low and I dont feel like waiting if i run out.... thanks again
Last edited by 10acjed; 02-10-2009 at 06:11 PM.
i7-950 @ 4.24 | XPSC Rasa - MCP655 - RX240 | EVGA X58 SLI LE | 3 x 2GB Mushkin 1600 6-8-6-20 @ 1475 |
EVGA GTX470 @ 825/1650/1750 w/VF3000F | Antec TruePower NEW TP750 | HAF 932
Last edited by MisterMagoo; 02-12-2009 at 04:22 PM.
[3960X 4.8GHz 1.35v] [32GB G.Skill Ripjaws 2133] [EVGA GTX 680 SLI] [ASUS RIVE] [Samsung Spinpoint F1 1TB R0]
[EK Supreme HF] [EK RIVE Full Board Kit] [Coolgate 120.3 + 120.1] [4 x Scythe GT D1225C12B5AP-15] [BitsPower Compression] [MCP655]
[3 x Acer S231HL LED 5760 x 1080 2d Surround]
When measuring the voltage where are you pointing the negative on the multi?
[3960X 4.8GHz 1.35v] [32GB G.Skill Ripjaws 2133] [EVGA GTX 680 SLI] [ASUS RIVE] [Samsung Spinpoint F1 1TB R0]
[EK Supreme HF] [EK RIVE Full Board Kit] [Coolgate 120.3 + 120.1] [4 x Scythe GT D1225C12B5AP-15] [BitsPower Compression] [MCP655]
[3 x Acer S231HL LED 5760 x 1080 2d Surround]
@ psu molex black wire plug
Thanks.
[3960X 4.8GHz 1.35v] [32GB G.Skill Ripjaws 2133] [EVGA GTX 680 SLI] [ASUS RIVE] [Samsung Spinpoint F1 1TB R0]
[EK Supreme HF] [EK RIVE Full Board Kit] [Coolgate 120.3 + 120.1] [4 x Scythe GT D1225C12B5AP-15] [BitsPower Compression] [MCP655]
[3 x Acer S231HL LED 5760 x 1080 2d Surround]
How long should I let the ink dry before installing/running a bench?
[3960X 4.8GHz 1.35v] [32GB G.Skill Ripjaws 2133] [EVGA GTX 680 SLI] [ASUS RIVE] [Samsung Spinpoint F1 1TB R0]
[EK Supreme HF] [EK RIVE Full Board Kit] [Coolgate 120.3 + 120.1] [4 x Scythe GT D1225C12B5AP-15] [BitsPower Compression] [MCP655]
[3 x Acer S231HL LED 5760 x 1080 2d Surround]
If you are going to use ink, measure the resistance between the 2 contacts you bridge with ink - when the ink is wet the resistance is high, and it falls as it dries. Once it's close to a dead short (the value you get on the DMM when you touch the 2 probes together) you can install & power on.
Also make sure you don't bridge anything you are not supposed to, just the 2 small contacts at each VID position.
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
Ok,
I am getting 1.25v on gpu with 1/2/3/4/5/11 and 2.15v on the mem. Time to play.
[3960X 4.8GHz 1.35v] [32GB G.Skill Ripjaws 2133] [EVGA GTX 680 SLI] [ASUS RIVE] [Samsung Spinpoint F1 1TB R0]
[EK Supreme HF] [EK RIVE Full Board Kit] [Coolgate 120.3 + 120.1] [4 x Scythe GT D1225C12B5AP-15] [BitsPower Compression] [MCP655]
[3 x Acer S231HL LED 5760 x 1080 2d Surround]
so going 1/2/3/4/5/11 loads @ 1.25vgpu?
i was wondering this.
thank you
PC-A04 | Z68MA-ED55 | 2500k | 2200+ XPG | 7970 | 180g 520 | 2x1t Black | X3 1000w
Yep.
[3960X 4.8GHz 1.35v] [32GB G.Skill Ripjaws 2133] [EVGA GTX 680 SLI] [ASUS RIVE] [Samsung Spinpoint F1 1TB R0]
[EK Supreme HF] [EK RIVE Full Board Kit] [Coolgate 120.3 + 120.1] [4 x Scythe GT D1225C12B5AP-15] [BitsPower Compression] [MCP655]
[3 x Acer S231HL LED 5760 x 1080 2d Surround]
801/1730/1452 on my vanilla...
I have had so many bsod the past week trying to bang out benches at 4.6ghz that I think I borked my OS install. So I am also having driver issues...going to reformat and see where I get.
[3960X 4.8GHz 1.35v] [32GB G.Skill Ripjaws 2133] [EVGA GTX 680 SLI] [ASUS RIVE] [Samsung Spinpoint F1 1TB R0]
[EK Supreme HF] [EK RIVE Full Board Kit] [Coolgate 120.3 + 120.1] [4 x Scythe GT D1225C12B5AP-15] [BitsPower Compression] [MCP655]
[3 x Acer S231HL LED 5760 x 1080 2d Surround]
I'm confused do you bridge vid pin 2 and 4 or 1/2/3/4/5/11? Can someone clear this up for me? Also does this work on all GTX 285s or just certain brands?
1/3/11 are already bridged from factory on a standard card.
On an EVGA SSC card, 1/2/3/11 are already bridged from factory.
When we talk about bridging 2/4/5 we are meaning bridge them in addition to the ones already bridged from the factory.
If you have a standard card (1/3/11 already bridged):
Standard vgpu is ~1.16v
Bridging (2) will give ~1.23 vgpu load.
Bridging (2) & (4) will give ~1.24 vgpu load.
Bridging (2), (4) & (5) will give ~1.25 vgpu load.
If you have an EVGA SSC card (1/2/3/11 already bridged):
Standard vgpu is ~1.23v
Bridging (4) will give ~1.24 vgpu load.
Bridging (4) & (5) will give ~1.25 vgpu load.
If the card is reference design (which I think they all are but I can't be certain) then it should work fine.
Last edited by CryptiK; 02-12-2009 at 10:09 PM.
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
i got the ssc @ 1.29vcore load
i might be onto smtg
yeh!! 1.33vcore @ load
pencil mod at it
Woah nice, what did you do?
I had no time to play over last couple of days been really busy.
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
yes Napalm, please share the secret... 1.33 sounds real appealing....
good job BTW
i7-950 @ 4.24 | XPSC Rasa - MCP655 - RX240 | EVGA X58 SLI LE | 3 x 2GB Mushkin 1600 6-8-6-20 @ 1475 |
EVGA GTX470 @ 825/1650/1750 w/VF3000F | Antec TruePower NEW TP750 | HAF 932
still testing guys
got it up to 1.36vcore @ load
and i think i have it figured out
let me find some pix and ill explain in a bit..
Last edited by nickless; 02-13-2009 at 04:15 AM.
|RIIIE||Xeon W3520#3845A935|EVGA GTX480||PC3 16000 Kingston HyperX 6GB||2x150GB WD VRaptor||WD6401AALS||HAF 932//CM 1250W||LenovoL220x||X-Fi Xtreme Music||Lycosa+Lachesis+Destructor+G27+P880|
WC-Loop1: CPU |EK-Supreme HF|Magicool Xtreme III||MCP355||MCRES| Loop2: VGA/NB| EK-FC480 GTX-Acetal / MCW30|MCP655|MCR220QP|MCRES|
Bookmarks