Page 5 of 30 FirstFirst ... 234567815 ... LastLast
Results 101 to 125 of 750

Thread: GTX285 various mods.. which may work for GTX260/280/295 also

  1. 02-10-2009, 05:40 AM #101
    10acjed
    10acjed is offline
    Registered User
    Join Date
    Feb 2009
    Posts
    26

    Thanks

    Thanks for all the info guys.. I will be doing some testing this weekend on my BFG OC to see what stock vgpu and vmem are and seeing if i cant grab an extra few mhz from this.....

    i7-950 @ 4.24 | XPSC Rasa - MCP655 - RX240 | EVGA X58 SLI LE | 3 x 2GB Mushkin 1600 6-8-6-20 @ 1475 |
    EVGA GTX470 @ 825/1650/1750 w/VF3000F | Antec TruePower NEW TP750 | HAF 932
    Reply With Quote Reply With Quote
  2. 02-10-2009, 06:01 AM #102
    NapalmV5
    NapalmV5 is offline
    Xtreme Guru
    Join Date
    Dec 2002
    Posts
    4,046
    Quote Originally Posted by CryptiK View Post
    Interesting, what do you get with just 1/2/3/4/11 ?
    im gonna play around with the 26.6k later today

    1/2/3/4/11: 1.22-23vcore


    Quote Originally Posted by 10acjed View Post
    Thanks for all the info guys.. I will be doing some testing this weekend on my BFG OC to see what stock vgpu and vmem are and seeing if i cant grab an extra few mhz from this.....

    good luck
    Reply With Quote Reply With Quote
  3. 02-10-2009, 06:01 PM #103
    10acjed
    10acjed is offline
    Registered User
    Join Date
    Feb 2009
    Posts
    26
    edit.. i found the vgpu 1.18 load, and 1.09 idle with it downclocked...

    thanks

    It appears that on my BFG OC version pins 1/3/11 are already bridged as well. So Id like to see what I get by bridging 2/4. are there any other combo's that may help?


    Also, does anyone know a chain store for a conductive pen? Im getting low and I dont feel like waiting if i run out.... thanks again
    Last edited by 10acjed; 02-10-2009 at 06:11 PM.
    i7-950 @ 4.24 | XPSC Rasa - MCP655 - RX240 | EVGA X58 SLI LE | 3 x 2GB Mushkin 1600 6-8-6-20 @ 1475 |
    EVGA GTX470 @ 825/1650/1750 w/VF3000F | Antec TruePower NEW TP750 | HAF 932
    Reply With Quote Reply With Quote
  4. 02-10-2009, 06:35 PM #104
    dengyong
    dengyong is offline
    Xtreme Mentor dengyong's Avatar
    Join Date
    Nov 2006
    Location
    A great place again
    Posts
    2,589
    Quote Originally Posted by 10acjed View Post
    edit.. i found the vgpu 1.18 load, and 1.09 idle with it downclocked...

    thanks

    It appears that on my BFG OC version pins 1/3/11 are already bridged as well. So Id like to see what I get by bridging 2/4. are there any other combo's that may help?


    Also, does anyone know a chain store for a conductive pen? Im getting low and I dont feel like waiting if i run out.... thanks again
    Radio shack has conductive ink pens.

    The answer to your other question is in the previous posts.
    Reply With Quote Reply With Quote
  5. 02-12-2009, 04:15 PM #105
    MisterMagoo
    MisterMagoo is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    213
    Quote Originally Posted by dengyong View Post
    For anyone confused about the vmod here's a pic.
    All credit to CryptiK and NapalmV5.
    Attachment 94504
    Forgive me for sounding like a noob here.

    Can this be done with a pencil for easy reversal? Also how are you all seeing voltage?

    Edit: Sorry.

    Quote Originally Posted by NapalmV5 View Post
    sorry nickless no pencil but all it takes is silver conductive paint to bridge a vid pin

    http://www.xtremesystems.org/Forums/...2&postcount=56

    if you bridge vid pin 2 and 4.. take a look at post #71 by cryptik

    and results @ post #73 by dengyong
    Last edited by MisterMagoo; 02-12-2009 at 04:22 PM.
    [3960X 4.8GHz 1.35v] [32GB G.Skill Ripjaws 2133] [EVGA GTX 680 SLI] [ASUS RIVE] [Samsung Spinpoint F1 1TB R0]
    [EK Supreme HF] [EK RIVE Full Board Kit] [Coolgate 120.3 + 120.1] [4 x Scythe GT D1225C12B5AP-15] [BitsPower Compression] [MCP655]
    [3 x Acer S231HL LED 5760 x 1080 2d Surround]
    Reply With Quote Reply With Quote
  6. 02-12-2009, 04:24 PM #106
    dengyong
    dengyong is offline
    Xtreme Mentor dengyong's Avatar
    Join Date
    Nov 2006
    Location
    A great place again
    Posts
    2,589
    Quote Originally Posted by MisterMagoo View Post
    Forgive me for sounding like a noob here.

    Can this be done with a pencil for easy reversal? Also how are you all seeing voltage?

    Edit: Sorry.
    No pencil, use conductive ink for easy reversal.

    For voltage check post 90.
    Reply With Quote Reply With Quote
  7. 02-12-2009, 06:34 PM #107
    MisterMagoo
    MisterMagoo is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    213
    When measuring the voltage where are you pointing the negative on the multi?
    [3960X 4.8GHz 1.35v] [32GB G.Skill Ripjaws 2133] [EVGA GTX 680 SLI] [ASUS RIVE] [Samsung Spinpoint F1 1TB R0]
    [EK Supreme HF] [EK RIVE Full Board Kit] [Coolgate 120.3 + 120.1] [4 x Scythe GT D1225C12B5AP-15] [BitsPower Compression] [MCP655]
    [3 x Acer S231HL LED 5760 x 1080 2d Surround]
    Reply With Quote Reply With Quote
  8. 02-12-2009, 06:40 PM #108
    NapalmV5
    NapalmV5 is offline
    Xtreme Guru
    Join Date
    Dec 2002
    Posts
    4,046
    @ psu molex black wire plug
    Reply With Quote Reply With Quote
  9. 02-12-2009, 06:42 PM #109
    MisterMagoo
    MisterMagoo is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    213
    Thanks.
    [3960X 4.8GHz 1.35v] [32GB G.Skill Ripjaws 2133] [EVGA GTX 680 SLI] [ASUS RIVE] [Samsung Spinpoint F1 1TB R0]
    [EK Supreme HF] [EK RIVE Full Board Kit] [Coolgate 120.3 + 120.1] [4 x Scythe GT D1225C12B5AP-15] [BitsPower Compression] [MCP655]
    [3 x Acer S231HL LED 5760 x 1080 2d Surround]
    Reply With Quote Reply With Quote
  10. 02-12-2009, 06:55 PM #110
    MisterMagoo
    MisterMagoo is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    213
    How long should I let the ink dry before installing/running a bench?
    [3960X 4.8GHz 1.35v] [32GB G.Skill Ripjaws 2133] [EVGA GTX 680 SLI] [ASUS RIVE] [Samsung Spinpoint F1 1TB R0]
    [EK Supreme HF] [EK RIVE Full Board Kit] [Coolgate 120.3 + 120.1] [4 x Scythe GT D1225C12B5AP-15] [BitsPower Compression] [MCP655]
    [3 x Acer S231HL LED 5760 x 1080 2d Surround]
    Reply With Quote Reply With Quote
  11. 02-12-2009, 07:10 PM #111
    dengyong
    dengyong is offline
    Xtreme Mentor dengyong's Avatar
    Join Date
    Nov 2006
    Location
    A great place again
    Posts
    2,589
    Quote Originally Posted by MisterMagoo View Post
    How long should I let the ink dry before installing/running a bench?
    Until you're sure it will stay where you put it.
    Reply With Quote Reply With Quote
  12. 02-12-2009, 07:55 PM #112
    CryptiK
    CryptiK is offline
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,035
    If you are going to use ink, measure the resistance between the 2 contacts you bridge with ink - when the ink is wet the resistance is high, and it falls as it dries. Once it's close to a dead short (the value you get on the DMM when you touch the 2 probes together) you can install & power on.

    Also make sure you don't bridge anything you are not supposed to, just the 2 small contacts at each VID position.
    Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
    Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
    Reply With Quote Reply With Quote
  13. 02-12-2009, 08:01 PM #113
    MisterMagoo
    MisterMagoo is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    213
    Ok,

    I am getting 1.25v on gpu with 1/2/3/4/5/11 and 2.15v on the mem. Time to play.
    [3960X 4.8GHz 1.35v] [32GB G.Skill Ripjaws 2133] [EVGA GTX 680 SLI] [ASUS RIVE] [Samsung Spinpoint F1 1TB R0]
    [EK Supreme HF] [EK RIVE Full Board Kit] [Coolgate 120.3 + 120.1] [4 x Scythe GT D1225C12B5AP-15] [BitsPower Compression] [MCP655]
    [3 x Acer S231HL LED 5760 x 1080 2d Surround]
    Reply With Quote Reply With Quote
  14. 02-12-2009, 08:06 PM #114
    ChinStrap
    ChinStrap is offline
    Xtreme Member
    Join Date
    Dec 2007
    Location
    CR:IA
    Posts
    384
    so going 1/2/3/4/5/11 loads @ 1.25vgpu?

    i was wondering this.

    thank you
    PC-A04 | Z68MA-ED55 | 2500k | 2200+ XPG | 7970 | 180g 520 | 2x1t Black | X3 1000w
    Reply With Quote Reply With Quote
  15. 02-12-2009, 08:12 PM #115
    MisterMagoo
    MisterMagoo is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    213
    Yep.
    [3960X 4.8GHz 1.35v] [32GB G.Skill Ripjaws 2133] [EVGA GTX 680 SLI] [ASUS RIVE] [Samsung Spinpoint F1 1TB R0]
    [EK Supreme HF] [EK RIVE Full Board Kit] [Coolgate 120.3 + 120.1] [4 x Scythe GT D1225C12B5AP-15] [BitsPower Compression] [MCP655]
    [3 x Acer S231HL LED 5760 x 1080 2d Surround]
    Reply With Quote Reply With Quote
  16. 02-12-2009, 08:38 PM #116
    MisterMagoo
    MisterMagoo is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    213
    801/1730/1452 on my vanilla...

    I have had so many bsod the past week trying to bang out benches at 4.6ghz that I think I borked my OS install. So I am also having driver issues...going to reformat and see where I get.
    [3960X 4.8GHz 1.35v] [32GB G.Skill Ripjaws 2133] [EVGA GTX 680 SLI] [ASUS RIVE] [Samsung Spinpoint F1 1TB R0]
    [EK Supreme HF] [EK RIVE Full Board Kit] [Coolgate 120.3 + 120.1] [4 x Scythe GT D1225C12B5AP-15] [BitsPower Compression] [MCP655]
    [3 x Acer S231HL LED 5760 x 1080 2d Surround]
    Reply With Quote Reply With Quote
  17. 02-12-2009, 09:48 PM #117
    tranceaddict
    tranceaddict is offline
    Xtreme Member
    Join Date
    Nov 2005
    Posts
    143
    I'm confused do you bridge vid pin 2 and 4 or 1/2/3/4/5/11? Can someone clear this up for me? Also does this work on all GTX 285s or just certain brands?
    Reply With Quote Reply With Quote
  18. 02-12-2009, 10:04 PM #118
    CryptiK
    CryptiK is offline
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,035
    1/3/11 are already bridged from factory on a standard card.

    On an EVGA SSC card, 1/2/3/11 are already bridged from factory.

    When we talk about bridging 2/4/5 we are meaning bridge them in addition to the ones already bridged from the factory.

    If you have a standard card (1/3/11 already bridged):

    Standard vgpu is ~1.16v

    Bridging (2) will give ~1.23 vgpu load.

    Bridging (2) & (4) will give ~1.24 vgpu load.

    Bridging (2), (4) & (5) will give ~1.25 vgpu load.

    If you have an EVGA SSC card (1/2/3/11 already bridged):

    Standard vgpu is ~1.23v

    Bridging (4) will give ~1.24 vgpu load.

    Bridging (4) & (5) will give ~1.25 vgpu load.

    If the card is reference design (which I think they all are but I can't be certain) then it should work fine.
    Last edited by CryptiK; 02-12-2009 at 10:09 PM.
    Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
    Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
    Reply With Quote Reply With Quote
  19. 02-12-2009, 10:32 PM #119
    tranceaddict
    tranceaddict is offline
    Xtreme Member
    Join Date
    Nov 2005
    Posts
    143
    Quote Originally Posted by CryptiK View Post
    1/3/11 are already bridged from factory on a standard card.

    On an EVGA SSC card, 1/2/3/11 are already bridged from factory.

    When we talk about bridging 2/4/5 we are meaning bridge them in addition to the ones already bridged from the factory.

    If you have a standard card (1/3/11 already bridged):

    Standard vgpu is ~1.16v

    Bridging (2) will give ~1.23 vgpu load.

    Bridging (2) & (4) will give ~1.24 vgpu load.

    Bridging (2), (4) & (5) will give ~1.25 vgpu load.

    If you have an EVGA SSC card (1/2/3/11 already bridged):

    Standard vgpu is ~1.23v

    Bridging (4) will give ~1.24 vgpu load.

    Bridging (4) & (5) will give ~1.25 vgpu load.

    If the card is reference design (which I think they all are but I can't be certain) then it should work fine.
    Thank you for the very excellent answer; it is exactly what I was looking for.
    Reply With Quote Reply With Quote
  20. 02-13-2009, 01:25 AM #120
    NapalmV5
    NapalmV5 is offline
    Xtreme Guru
    Join Date
    Dec 2002
    Posts
    4,046
    i got the ssc @ 1.29vcore load

    i might be onto smtg
    Reply With Quote Reply With Quote
  21. 02-13-2009, 01:39 AM #121
    NapalmV5
    NapalmV5 is offline
    Xtreme Guru
    Join Date
    Dec 2002
    Posts
    4,046
    yeh!! 1.33vcore @ load

    pencil mod at it
    Reply With Quote Reply With Quote
  22. 02-13-2009, 02:06 AM #122
    CryptiK
    CryptiK is offline
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,035
    Woah nice, what did you do?

    I had no time to play over last couple of days been really busy.
    Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
    Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
    Reply With Quote Reply With Quote
  23. 02-13-2009, 03:51 AM #123
    10acjed
    10acjed is offline
    Registered User
    Join Date
    Feb 2009
    Posts
    26
    yes Napalm, please share the secret... 1.33 sounds real appealing....


    good job BTW
    i7-950 @ 4.24 | XPSC Rasa - MCP655 - RX240 | EVGA X58 SLI LE | 3 x 2GB Mushkin 1600 6-8-6-20 @ 1475 |
    EVGA GTX470 @ 825/1650/1750 w/VF3000F | Antec TruePower NEW TP750 | HAF 932
    Reply With Quote Reply With Quote
  24. 02-13-2009, 03:53 AM #124
    NapalmV5
    NapalmV5 is offline
    Xtreme Guru
    Join Date
    Dec 2002
    Posts
    4,046
    still testing guys

    got it up to 1.36vcore @ load

    and i think i have it figured out

    let me find some pix and ill explain in a bit..
    Reply With Quote Reply With Quote
  25. 02-13-2009, 04:10 AM #125
    nickless
    nickless is offline
    Xtreme Member
    Join Date
    Jun 2007
    Location
    EU, BUL
    Posts
    203
    Quote Originally Posted by NapalmV5 View Post
    still testing guys

    got it up to 1.36vcore @ load

    and i think i have it figured out

    let me find some pix and ill explain in a bit..
    Awesome man, I have no patience to see it. I need more power. With 1.22v I get 810/1764/1458 benchable , but I need more
    Last edited by nickless; 02-13-2009 at 04:15 AM.
    |RIIIE||Xeon W3520#3845A935|EVGA GTX480||PC3 16000 Kingston HyperX 6GB||2x150GB WD VRaptor||WD6401AALS||HAF 932//CM 1250W||LenovoL220x||X-Fi Xtreme Music||Lycosa+Lachesis+Destructor+G27+P880|
    WC-Loop1: CPU |EK-Supreme HF|Magicool Xtreme III||MCP355||MCRES| Loop2: VGA/NB| EK-FC480 GTX-Acetal / MCW30|MCP655|MCR220QP|MCRES|
    Reply With Quote Reply With Quote
Page 5 of 30 FirstFirst ... 234567815 ... LastLast
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules