i7 920 @4769Mhz TRUE120 AIR !

**eva2000** · 01-18-2009, 07:12 AM

4780mhz! dam nice ... i'll have to drop my mem multi to 8x and see how much more there is

yup Eva = Evangelion while 2000 was the year after I got into NGE/Anime, but coincidentally is the year of the 'Second Impact' in the anime series

**~~TheKarmakazi~~** · 01-18-2009, 08:32 AM

nice work again George! that 32M is really nice! did you ever get copy waza sorted?

**~~slapmehard~~** · 01-18-2009, 10:44 AM

Originally Posted by eva2000

couldn't bare to look LOL... bios had 43-49C.. let's just say room temp was 21C when i started the bench session, and when the session ended room temp rose to 23-25C

On air

man thats really nice...... you did good on max bblck 230+ too

I sure hope you at least set the cpu shut off temp to 90c or less

**xbrian88** · 01-18-2009, 01:35 PM

good clock eva...

dfi one is coming to me ..

**eva2000** · 01-18-2009, 03:31 PM

Originally Posted by TheKarmakazi

nice work again George! that 32M is really nice! did you ever get copy waza sorted?

thanks... CW's full gain is alluding me but did better with maxmem set

Originally Posted by slapmehard

On air

man thats really nice...... you did good on max bblck 230+ too

I sure hope you at least set the cpu shut off temp to 90c or less

haha i disabled temp shutdown limit in bios

Originally Posted by xbrian88

good clock eva...

dfi one is coming to me ..

thanks... congrats - for first time DFI X58 nice read http://i4memory.com/showthread.php?t=12855

**A2C** · 01-18-2009, 03:54 PM

Holy

!
its realy amazing frequency and more amazing when it´s only on Air
good job

**eva2000** · 01-19-2009, 12:48 AM

thanks

**The-Fox** · 01-19-2009, 01:34 AM

Get some sleep and stop benching eva

J/K, you never stop to the top

BTW, did you do anything special to run those RAM sticks at that insane speed ?
I just got G.Skill 1600Mhz Pi Black CL8 to play with and I can seem to hit 32M with 2105 Mhz @ 9-10-9-24 @1.8v.
AFAIK they use the same chips like yours, Samsung HCF0, right ?
I really want to get to 215 bclk with x10 memory multy and break that 8minute barrier for SuperPi32M.

Btw, I think your 32M run is amazing but the result seems somewhat slow, I would imagine you get into the 7m30s range.

Keep up the good work

**eva2000** · 01-19-2009, 06:22 AM

Originally Posted by The-Fox

Get some sleep and stop benching eva

J/K, you never stop to the top

BTW, did you do anything special to run those RAM sticks at that insane speed ?
I just got G.Skill 1600Mhz Pi Black CL8 to play with and I can seem to hit 32M with 2105 Mhz @ 9-10-9-24 @1.8v.
AFAIK they use the same chips like yours, Samsung HCF0, right ?
I really want to get to 215 bclk with x10 memory multy and break that 8minute barrier for SuperPi32M.

Btw, I think your 32M run is amazing but the result seems somewhat slow, I would imagine you get into the 7m30s range.

Keep up the good work

is that 6GB or 3GB G.SKill PC3-12800 BPI ? i think both are Samsung HCF0

nothing special besides musical chairs (dimm slots) testing of each modules to find which dimm slots each module likes - memory tip #1 at http://i4memory.com/102537-post3.html

32m times are without copy waza so yeah maybe a bit slow that and with tighter trfc an main timings would be faster but probably limit of my modules

**The-Fox** · 01-19-2009, 06:57 AM

Musical chairs reminds me of kindergarten days

I would try it out, funny method but if it works i don't care

It is the 6GB Kit (2GBx3).

Thanks for the tip

What voltages you needed to reach that speed ? my sticks hit the 1.8v sweet spot, anything above/below and I get crashes at high speeds.

I am new to the "copy waza" method, do you have short explaining guide for that ?

**eva2000** · 01-20-2009, 10:46 PM

i'm wrong person to ask about CW as i haven't got the hang of it yet (very little or no gain compared to non-CW pi runs) but read http://www.xtremesystems.org/forums/...ad.php?t=49345

what voltage to reach what speed ?

**The-Fox** · 01-20-2009, 11:27 PM

Thanks for the links

I meant voltage for the Dram.
What Dram and QPI/VTT voltage you needed to get them to ~2200Mhz ?

**eva2000** · 01-20-2009, 11:38 PM

for DDR3-2228Mhz 9-9-9-24 32M pi need CPU VTT = 1.6-1.61v and VDIMM 2.025v held back by Gskill 1GB module in my mix considering DDR3-2133 corsairs hit DDR3-2010mhz 9-9-9-24 at 1.68v

**woffen** · 01-20-2009, 11:40 PM

Amazing results!

What is the max cpu vtt you can run for 24/7 use?

**systemviper** · 01-20-2009, 11:47 PM

Wow that is some great numbers, wish i had that chip /

as always some outstandign work

how much ballpark do you rock the qpi voltage, i see the vcore is 1.6 and i not sure how high i can go for limited runs with QPi

**OC4/3** · 01-22-2009, 07:31 AM

Originally Posted by eva2000

i'm wrong person to ask about CW as i haven't got the hang of it yet (very little or no gain compared to non-CW pi runs) but read http://www.xtremesystems.org/forums/...ad.php?t=49345

what voltage to reach what speed ?

Hint:OCX SPI Tweaker
Gain about 6-7's on most of the rig i tested

I think there are some execution trick which i never get hang of it yet

**eva2000** · 01-22-2009, 07:37 AM

Originally Posted by woffen

Amazing results!

What is the max cpu vtt you can run for 24/7 use?

intel spec'd 1.35-1.375v IIRC

Originally Posted by systemviper

Wow that is some great numbers, wish i had that chip /

as always some outstandign work

how much ballpark do you rock the qpi voltage, i see the vcore is 1.6 and i not sure how high i can go for limited runs with QPi

CPU VTT = uncore volts so around 1.6v heh

Originally Posted by OC4/3

Hint:OCX SPI Tweaker
Gain about 6-7's on most of the rig i tested

I think there are some execution trick which i never get hang of it yet

with OCX SPI Twker i get around 1-3 seconds heh

**expect91** · 01-22-2009, 07:40 AM

Looks nice

**tcorbyn** · 01-23-2009, 01:28 AM

It would be nice to see that CPU with some Ln2... If it can get that far on air, imagine on somthing more extreme!

**T_Flight** · 01-23-2009, 01:31 AM

This is incredible. Just absolutely incredible. Be careful with that Chip...it's Golden.

**strange|ife** · 01-23-2009, 01:40 AM

what the

that's damn good, congrats.

I think in march I will be upgrading. The 920 looks good for what I will need

**OC4/3** · 01-23-2009, 03:50 AM

Originally Posted by eva2000

intel spec'd 1.35-1.375v IIRC

CPU VTT = uncore volts so around 1.6v heh

with OCX SPI Twker i get around 1-3 seconds heh

But it is on some slow rig

Q6600@3.8ghz + T Power I45 and 2x2GB Team Xtreem Dark 4GB kit

Anyway,CW is quite system dependent from what i read

**miahallen** · 01-23-2009, 04:00 AM

WOW Eva...amazing results...I thought I had a good chip with 4.5GHz SPI runs on cold water....I've changed my mind

**eva2000** · 01-23-2009, 04:28 AM

Originally Posted by expect91

Looks nice

thanks

Originally Posted by T_Flight

This is incredible. Just absolutely incredible. Be careful with that Chip...it's Golden.

Yup i have a feeling theses even more with the right memory modules and/or settings for higher bclk than 228-230 - testing some new beta bios right now

Originally Posted by OC4/3

But it is on some slow rig

Q6600@3.8ghz + T Power I45 and 2x2GB Team Xtreem Dark 4GB kit

Anyway,CW is quite system dependent from what i read

i haven't gotten CW to work since s478/775 days either heh

Originally Posted by miahallen

WOW Eva...amazing results...I thought I had a good chip with 4.5GHz SPI runs on cold water....I've changed my mind

Not bad ya self...

Been doing some video encoding lately at comfortable 4009mhz at 1.328-1.344v and interesting results

**Oliver** · 01-23-2009, 04:51 AM

SICK George, you are just tearing up the KPI model huh ?

Thread: i7 920 @4769Mhz TRUE120 AIR !

Thread Tools

Search Thread

Rate This Thread

Display

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions