Page 1 of 3 123 LastLast
Results 1 to 25 of 71

Thread: BloodRage RAM Compatibility List

  1. #1
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,393

    BloodRage RAM Compatibility List

    Let's try to build a RAM ( Memory ) compatibility list for the Foxconn BloodRage

    I've personally tested the following memory kits on the BloodRage with the G13 BIOS and had no issues at all:

    Compatible ( Working Fine )

    CellShock DDR3-1800 8-7-6-21 2GB Dual Channel Kit ( CS3222580 ) - SPD Tool v0.63 dump file - Thaiphoon Burner 6 dump file
    SuperTalent DDR3-1866 C8 2GB Dual Channel Kit ( W1866UX2G8 ) - SPD Tool v0.63 dump file - Thaiphoon Burner 6 dump file
    CSX Diablo DDR3-2000 2GB Dual Channel Kit ( DIABLO3-2000-2GB-KIT ) - SPD Tool v0.63 dump file - Thaiphoon Burner 6 dump file
    A-Data Vitesta Extreme Edition DDR3-1333+ 3GB Triple Channel Kit ( AD31333E001GMU ) - SPDtool v0.63 dump file - Thaiphoon Burner 6 dump file
    Corsair Dominator DDR3-1800 C7 2GB Dual Channel Kit ( TWIN3X2048-1800C7DF )
    Corsair Dominator DDR3-1600 6GB Triple Channel Kit ( TR3X3G1600C8D )
    Corsair Dominator DDR3-2000 C7 6GB Tripple Channel Kit ( ? )
    Corsair Dominator DDR3-2000 C7 3GB Tripple Channel Kit ( ? )
    Corsair DDR3-1866 C9 6GB Tripple Channel Kit ( TR3X6G1866C9D )
    SuperTalent DDR3-1600 C7 2GB Dual Channel Kit ( W1600UX2G7 )
    G.Skill DDR3-1600 6GB Triple Channel Kit ( F3-12800CL9T-6GBNQ )
    OCZ DDR3-1600 Platinum Edition 3GB Triple Channel Kit ( OCZ3P1600LV3GK )
    OCZ DDR3-1800 Platinum Edition 2GB Dual Channel Kit ( OCZ3P18002GK )
    Mushkin DDR3-1600 6GB Triple Channel Kit ( 998679 )

    I will upload their SPD dumps on my FTP and link them here so you can try them out if you're having compatibility issues with your sticks.
    Last edited by saaya; 02-19-2009 at 03:01 AM.
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero

  2. #2
    Xtreme X.I.P.
    Join Date
    Nov 2002
    Location
    Shipai
    Posts
    34,647
    sweet! thanks a lot bill!
    im heading for the office now and will work on BloodRage and Destroyer compatibility lists and some other stuff
    I finally got a new 3G modem, this time one that WORKS :P
    in case anybody from asia reads this, stay away from china telecom 3G!!! they may have the most antennas, but the speed and reliability is terrible :P

  3. #3
    Xtreme Member
    Join Date
    Nov 2008
    Location
    Yokosuka, Japan
    Posts
    228
    I'll add to the list Bench!

    Corsair Dominator 6GB (3x2GB) DDR3 1600 (PC3 12800) TR3X6G1600C8D works and is rock solid! At 1.64V VDIMM 2100Mhz fully Memtest86+ stable!
    Core i7 920 D0 @ 4833.55Mhz~EVGA "Classified" E760~XFX HD5870~6GB G.Skill Perfect Storm DDR3 2000~Corsair HX1000~2x WD Velociraptor 150GB RAID 0~WD Cavier Black 1TB~Custom Danger Den Water Box Plus~Windows 7 x64 RTM~Dell 2407WFP

    H20!
    CPU Loop: MCP-655~Swiftech MCR-220~HEATKILLER® 3.0 LT
    GPU Loop: MCP-655~XSPC RS240~EK FC5870 Plexi+Nickel


  4. #4
    Registered User
    Join Date
    Aug 2008
    Posts
    21
    Tested with BloodRage:

    G.Skill 6GB (3x2GB) DDR3-1600 (PC3-12800) || (F3-12800CL9T-6GBNQ) || CL 9-9-9-24 @ 1.6V

    With P03 BIOS I was able to select XMP profile for those modules.

  5. #5
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,393
    List updated.
    Gonna upload some of the SPDs later on.
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero

  6. #6
    Registered User
    Join Date
    Sep 2006
    Posts
    13
    Kingston DDR3-1066 2 x 1 GB kit CL7 (KVR1066D3N7K2/2G) works fine.

  7. #7
    Xtreme Member
    Join Date
    Dec 2007
    Posts
    180
    anyone try the ocz platinum series?

  8. #8
    Registered User
    Join Date
    Dec 2008
    Location
    Texas
    Posts
    74
    Quote Originally Posted by s002wjh View Post
    anyone try the ocz platinum series?
    Also interested in this, but if noone knows I suppose I'll be able to answer on Tuesday or Wednesday.

    EDIT: Make that Thursday! PSU DoA
    Last edited by JudgmentJay; 01-21-2009 at 09:51 AM.

  9. #9
    Registered User
    Join Date
    Dec 2008
    Location
    Texas
    Posts
    74
    3x1gb OCZ Platinum working fine @ 1600mhz 7-7-7-24.

  10. #10
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,393
    Quote Originally Posted by JudgmentJay View Post
    3x1gb OCZ Platinum working fine @ 1600mhz 7-7-7-24.
    Can you post the exact model number for your kit ? ( it's something like OCZ3blahblah )
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero

  11. #11
    Registered User
    Join Date
    Dec 2008
    Location
    Texas
    Posts
    74
    Quote Originally Posted by BenchZowner View Post
    Can you post the exact model number for your kit ? ( it's something like OCZ3blahblah )
    My bad, it's OCZ3P1600LV3GK.
    Hardware: CaseLabs T10 | REIV | 3930k @ 4.8 | 16GB Mushkin 1600mhz 8-8-8-24 | 3x GTX680+ 4GB Tri-SLI | 2x 240GB Cherryville raid0 | 2x 3TB Barracuda | CEntrance DACmini CX | HiFiMan HE-500 | 30" Ultrasharp U3011
    Watercooling: EK-Supreme HF | 3x EK-FC680 GTX | EK-FB Kit RE4 | MCP35X2 | 2x Alphacool UT60 | XSPC RS360 | EK-Multioption RES X2 250 Advanced

  12. #12
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,393
    Updated.
    I'll upload some SPDs in a bit
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero

  13. #13
    I am Addicted!
    Join Date
    Feb 2006
    Posts
    1,772
    when are we going to get an update. I should be testing some Supertalent 6gb 1600 cl9 and Mushkin 6gb 1600 cl7; hopefully this weekend after ram gets in. not sure if anyone has already confirmed either of these yet

  14. #14
    Xtreme Member
    Join Date
    Apr 2008
    Posts
    444
    You can add OCZ DDR3-1800 Platinum 2GB Dual Channel kit [OCZ3P18002GK].
    Currently running it at DDR3-1600 8-8-8-24 on 1.60v [testing while Dominator GT comest out]


    Ol' Faithful - Retired...

    - Foxconn BlackOps - E8600 @ 4.5GHz, 1.32v - 8GB Patriot Division2 @ 1600 8-8-8-20 - OCZ Apex 120GB SSD - XFX HD6870 1GB Black Edition - BFG Ageia Physx - ULTRA X3 ULT40064 1000w - Cosmos RC-1000 - Gateway XHD3000 30"
    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    TOP SECRET:

    - EVGA Classified3 - i7 950 @ 4.25Ghz on 1.30v - 24GB Kingston HyperX @ 9-9-9-24 1600Mhz - XFX HD6970 v1.0 2GB @ 950/1450 - Diamond HD6970 v1.0 2GB @ 950/1450 - XFX 9800GT - SB X-Fi Fatal1ty Titanium Champion
    - 510 120GB SSD - CoolerMaster Silent Pro 1000w - Stacker 830 [Custom painted in Classified theme] - 3x 23" LG E2381VR SuperLED @ 5760x1080 - Yamaha RX-V371 Receiver - Martin Logan MTL-1 5.1ch Surround Speakers
    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    Silver Bullet

    - ASUS M4E-Z - i7 3770k @ 5Ghz - 16GB Crucial Ballistix Elite - HD 7970 3GB - 2x Corsair Force3 120GB SSD [RAID0] - ULTRA X4 1000w PSU




  15. #15
    Registered User
    Join Date
    Nov 2008
    Posts
    5
    I had some problems with the 6GB Kit of :

    OCZ Intel Extreme OCZ3X1600LV6GK

    it always stops at Post code 26.

    Afterwards I installed the Dominator Kit and it works fine with the same settings

  16. #16
    Xtreme X.I.P.
    Join Date
    Nov 2002
    Location
    Shipai
    Posts
    34,647
    Quote Originally Posted by INFRNL View Post
    when are we going to get an update. I should be testing some Supertalent 6gb 1600 cl9 and Mushkin 6gb 1600 cl7; hopefully this weekend after ram gets in. not sure if anyone has already confirmed either of these yet
    couldnt find either of those kits here... ill check again...

    Quote Originally Posted by dreagnon View Post
    I had some problems with the 6GB Kit of :

    OCZ Intel Extreme OCZ3X1600LV6GK

    it always stops at Post code 26.

    Afterwards I installed the Dominator Kit and it works fine with the same settings
    Hmmm even with one stick installed?
    thats an older kit so maybe it needs high vdimm...
    What BIOS are you on?
    Can you try G16 and enable virtual XMP and set the speed to DDR3 1333 and then switch the memory to the OCZ kit?

  17. #17
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,393
    If you guys could upload SPD dumps of your RAM with SPDtool v0.63 and Thaiphoon Burner v6,0,3,0 Build 0116 Final it would be great.
    Clicking on the application name starts the download from my server.

    I'll post instructions on how to read the SPD and save them as a file later on.
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero

  18. #18
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,393
    To upload your SPD dumps use the following info:

    1) Use your RAM's product code as a filename for the dumps
    2) Upload them to my FTP using the following info:

    ftp server address: ftp.benchzone.com
    port: 21
    account type: normal
    username: spd@benchzone.com
    password: spd

    You can use a FTP client like FileZilla to upload the files to the FTP.
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero

  19. #19
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,393
    I uploaded some SPDs and updated the first post
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero

  20. #20
    Xtreme Enthusiast
    Join Date
    Aug 2003
    Posts
    569
    BenchZowner, cool thread! Thanks for your efforts! I can provide a free license for the latest Thaiphoon!

  21. #21
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,393
    Quote Originally Posted by VVJ View Post
    BenchZowner, cool thread! Thanks for your efforts! I can provide a free license for the latest Thaiphoon!
    That would be greatly appreciated ( and useful )
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero

  22. #22
    Assistant Administrator systemviper's Avatar
    Join Date
    Nov 2007
    Location
    Newtown, CT
    Posts
    2,874
    I'll be firing up my Bloodrage this week, i'll test Cellshock 1866' 3x1G but it's old style DDR3 plus i am getting Mushkin 3x2G 1600 cas 7set.
    HWbot - Team: XtremeSystems
    XS cruncher - Team: XtremeSystems
    OCN Feedback
    HEAT


    *** Never argue with stupid people, they will drag you down to their level and then beat you with experience - Mark Twain

  23. #23
    Xtreme X.I.P.
    Join Date
    Nov 2002
    Location
    Shipai
    Posts
    34,647
    Quote Originally Posted by VVJ View Post
    BenchZowner, cool thread! Thanks for your efforts! I can provide a free license for the latest Thaiphoon!
    cool, thanks a lot man!

    Quote Originally Posted by systemviper View Post
    I'll be firing up my Bloodrage this week, i'll test Cellshock 1866' 3x1G but it's old style DDR3 plus i am getting Mushkin 3x2G 1600 cas 7set.
    looking forward to your results!

  24. #24
    Xtreme Enthusiast
    Join Date
    Aug 2003
    Posts
    569
    Everybody, who needs a free license just PM me your registration key from Thaiphoon Burner so that I could generate the activation key. Thanks for choosing Thaiphoon Burner!

  25. #25
    Registered User
    Join Date
    Jan 2009
    Location
    Self Banned
    Posts
    80
    I have had no problems with the OCZ 6GB kit (OCZ3P1600LV6GK), manual setting needed. Stock timings with 1T all day from 1066-1600. No problems with 7-7-7-20-1T in the same range. I have yet to pull off any 6 CAS even at 1066, maybe someone better than I could find the magic timings. I have not had the time to play above 1600 yet, but I will.

    P03 and G13 confirmed. The 3Gig is already up, but nothing like being sure.
    Last edited by RayderR6; 03-02-2009 at 07:15 PM.

Page 1 of 3 123 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •