Niceeeee!
AMD FX 8350 @ 4.4Ghz
Corsair H60
Gigabyte GA-990FXA-UD3 AM3+
8GB Mushkin Blackline @ 1800Mhz
Sapphire Radeon HD 7950 3GB
Crucial C300 SSD - Bootdrive
2 x 640GB Samsung - 1.2TB RAID 0
800GB Western Digital Green SATAII
Corsair TX 750
Coolermaster HAF932 - Modded by Blackstare
Ok I havent used it in a while so lets wait for temp talk. I myself have seen good results I would say....I have ran it for weeks at a time.
The one thing that makes me mad at it is. It does not always turn on. It gets to -35c or what ever when it turns on the PC. Instead it shuts down and I have to wait till it gets to -8c to flip it back on. It can do this over and over for an hour before it stays on....I asked fugger about how to remove that and he said remove the controller...I have no idea I opened it up and nope I could kill it too fast. I need to find some picks on what to do. I just want to flip a switch and it comes on.
At other times it starts just fine and could do so every day. Then you hit that day and you almost pass out waiting on it to just run...
When around 1.9v on a quad or even 2.0v the read out on the phase will say around -62 which is a lie but it's working very very hard I can feel the heat dump. The QX stays frozen(no temp reads coming from the chip) but I was going for 5Ghz never done that before. Then the man I asked(king)said I had my pll way over kill. I should of been doing less with it than more more and more.
So I hit 4.8Ghz with a QX9650. I can bench at 4.6 if I can remember right. But like I said about that damn pll.
If it wasn't for that I don't know what bug it is having I would love it. I almost have to leave it on if I don't want to get mad at it the following day.
Also my water setup makes more noise than it does. It's more low tone so it just really does not bug you.
Ryba's Ver 4 DryIce/LN2 pot"
Cryo-Z Phase-R-507A
AMD 955
GD70FX
Crucial2GB kit (1GBx2),DDR3 PC3-16000(2Ghz)
2 x 4890 MSi OC Cards
Maze5, Maze4, 120 Black Ice EX, one 240 Black Ice EX
Fixed speed pump powered by a 17v meanwell
Reminds me of the old soyo dragon mobos.
Gigabyte EX58-UD5 // Intel Core i7 920
SuperTalent PC3-12800 3x2gb
ATI 4870X2 2gb
Samsung 1TBx6
Coolermaster Silent Pro Gold 1000w
Coolermaster Cosmos
Dell u3014
you're right, does look a lot like it
http://www.pchardware.co.uk/siteimag...kt400board.jpg
Awesome moding
Personally I don't like the white colour, but thats just me.
White under UV. I like uv light it's not too bright and lets me see on my desk
Ryba's Ver 4 DryIce/LN2 pot"
Cryo-Z Phase-R-507A
AMD 955
GD70FX
Crucial2GB kit (1GBx2),DDR3 PC3-16000(2Ghz)
2 x 4890 MSi OC Cards
Maze5, Maze4, 120 Black Ice EX, one 240 Black Ice EX
Fixed speed pump powered by a 17v meanwell
i hate to be the party pooper here but seriously what were you thinkin' mate
10/10 for effort but damn dude does that really look better toyou
particularly the white/hotpink highlights eek
Ryba's Ver 4 DryIce/LN2 pot"
Cryo-Z Phase-R-507A
AMD 955
GD70FX
Crucial2GB kit (1GBx2),DDR3 PC3-16000(2Ghz)
2 x 4890 MSi OC Cards
Maze5, Maze4, 120 Black Ice EX, one 240 Black Ice EX
Fixed speed pump powered by a 17v meanwell
Last edited by little_scrapper; 12-29-2008 at 11:25 AM.
Boy that info was old. As am I. Currently my kids have taken over my desktops. They are both sporting matching GTX1080's. Last Christmas I got everyone Oculuses and thus GTX1080's. My eldest is some sort of CSGO champion gold label something or other. Me I work and shoot real guns. Build Comps as needed.
i think the white looks nice, but don't like the marker. should have masked off the other ics.
I really love it, perfect... Reminds me on Sapphire MBO's... Great work
Sorry dude, nice idea but it just does not look nice. Reminds me of that ugly Sapphire board that used I think it was the RS480 chipset.
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
It's cool.
Everyone has their own opinion. I didn't use the glitter glue. I used a marker for the red. Were do you see shinny glitter at
Also about painting over those chips. Could it not spread out the heat? Heat is going to work it's way out no matter what. I just didn't see masking them off if they didn't have a heatsink on them in the first place. I really don't think it's going to mess with them if so not bring down the system much.
So far it's a I like it or I don't
There are a lot of motherboards I hate the looks of and everyone else loves. To each their own.
And ket your the first I know of that didn't like the looks of that white AMD board. Haven't seen you around in a while. I hope life has been treating you well.
Ryba's Ver 4 DryIce/LN2 pot"
Cryo-Z Phase-R-507A
AMD 955
GD70FX
Crucial2GB kit (1GBx2),DDR3 PC3-16000(2Ghz)
2 x 4890 MSi OC Cards
Maze5, Maze4, 120 Black Ice EX, one 240 Black Ice EX
Fixed speed pump powered by a 17v meanwell
Indeed life has been pretty good cant wait for new years eve! An excuse to get pissed!
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
thats that then
i dont mind pink colour at all...i have lots of shirts and tshirts hehe but i just kinda look at all that different hardware and its just not matching up hehe
but if you like it thats all that matters
plus you may even have a bit more protection again water and stuff
btw i dont know if the Asus LAN chips get hot but on reference board they run real hot and i would uncover the spray on those things
maybe do a check
haha pretty cool!
Not my cup of tea but nice going anyway
Nice job DaMalta. Long time no see.
IMO, it looks O.K. But, it is the opinion in the eyes of the beholder.
Imagine if you tried RMA'ing that thing.
I know that it would be pretty pointless, but I would still do it just for sh**'s and giggles.
Core i7 920 D0 B-batch (4.1) (Kinda Stable?) | DFI X58 T3eH8 (Fed up with its' issues, may get a new board soon) | Patriot 1600 (9-9-9-24) (for now) | XFX HD 4890 (971/1065) (for now) |
80GB X25-m G2 | WD 640GB | PCP&C 750 | Dell 2408 LCD | NEC 1970GX LCD | Win7 Pro | CoolerMaster ATCS 840 {Modded to reverse-ATX, WC'ing internal}
CPU Loop: MCP655 > HK 3.0 LT > ST 320 (3x Scythe G's) > ST Res >Pump
GPU Loop: MCP655 > MCW-60 > PA160 (1x YL D12SH) > ST Res > BIP 220 (2x YL D12SH) >Pump
It looks cool buddy I always was a mod freak. Thanks for sharing your project Keep up the good work.
Not exactly what I would want my my mobo to look like, but damn dude.
+ respect for having the balls to paint your mobo. I never would of thought of doing that lol.
CPU:Q6600 G0 @ 3.825
Motherboard:Asus P5E X38
Memory:2x2GB OCZ Reapers DDR2 1066
Graphics Card:Asus 4850
Hard Drive:2xSegate 500gb 32MB Cache raid0
Power Supply:Xion 800W
Case:3DAurora
CPU cooling: D-tek Fuzion V2 (Quad insert removed)
GPU cooling: mcw60
Monitor:24" LG
Waz up Cain same old Same a little(have something in the works LOL)
Under the ice I needs to make a vist over there one of these days....I wonder if I could get a controller that works there, and my OCZ lol....not so much lol yet still there
Also cleaning out the lines with some hot hot water(I have it turned turned up to burn yea lol water heater can't get any hotter )
Cell phone camera
Hi Mr A/c Meanwell
Some soap for my babies
#%!@% Yellow Rubber Ducky!!!!
I haz my Rad and Rez to play with, and they are much cooler to play with than YOU!!!+3
Sorry other pics are for special people!!!
Going to install the motherboard on the tray as well as some other painting. I think I'm going to print a name for the board on a sticker!!!
Just have to come up with a name.
ASUS
White UV Knight Ultra 790i
My little helper is CRAZY ripping video cards apart also tonight!!!
3mL[LIT]
Last edited by DaMulta; 12-29-2008 at 06:09 PM.
Ryba's Ver 4 DryIce/LN2 pot"
Cryo-Z Phase-R-507A
AMD 955
GD70FX
Crucial2GB kit (1GBx2),DDR3 PC3-16000(2Ghz)
2 x 4890 MSi OC Cards
Maze5, Maze4, 120 Black Ice EX, one 240 Black Ice EX
Fixed speed pump powered by a 17v meanwell
Good to hear.
Still frying hardware, I presume?
Core i7 920 D0 B-batch (4.1) (Kinda Stable?) | DFI X58 T3eH8 (Fed up with its' issues, may get a new board soon) | Patriot 1600 (9-9-9-24) (for now) | XFX HD 4890 (971/1065) (for now) |
80GB X25-m G2 | WD 640GB | PCP&C 750 | Dell 2408 LCD | NEC 1970GX LCD | Win7 Pro | CoolerMaster ATCS 840 {Modded to reverse-ATX, WC'ing internal}
CPU Loop: MCP655 > HK 3.0 LT > ST 320 (3x Scythe G's) > ST Res >Pump
GPU Loop: MCP655 > MCW-60 > PA160 (1x YL D12SH) > ST Res > BIP 220 (2x YL D12SH) >Pump
Have not in a while all tho my 2 pumps are having one hot night!!! 3ed dump of the hot water tank on the rads lol. It out pours on them lol a lot of steam is just rolling off of them lol it's funny but it needed it.
I did this mod because I have no i7..no moneies..no CES again...have tickets....BUT next year is looking better already!
Ryba's Ver 4 DryIce/LN2 pot"
Cryo-Z Phase-R-507A
AMD 955
GD70FX
Crucial2GB kit (1GBx2),DDR3 PC3-16000(2Ghz)
2 x 4890 MSi OC Cards
Maze5, Maze4, 120 Black Ice EX, one 240 Black Ice EX
Fixed speed pump powered by a 17v meanwell
Bookmarks