Page 1 of 2 12 LastLast
Results 1 to 25 of 50

Thread: [ZDB] E8600 @ 6.6GHz with ASUS Rampage Extreme

  1. #1
    Xtreme Member
    Join Date
    Feb 2006
    Location
    Portugal
    Posts
    432

    Exclamation [ZDB] E8600 @ 6.6GHz with ASUS Rampage Extreme

    Hello guys,

    Last weekend the ZDB Team was present on XLParty - big LanParty here in Portugal - ASUS sponsored us with some hardware Thanks guys!

    We just had opportunity to test the hardware on the same day of the event, so don't expect any monstrous 3DMark or Pi score

    So, this is a little teaser of what you can expect for the next days/weeks

    E8600 Q820A598 (the special one ) - CB @ -158ºC
    ASUS Rampage Extreme
    k|ngp|n F1 EE








    Steelballzz:


    N3RO teaching some pretty girl :








    You can check the 6610MHz with 2 cores enabled (05:08) on Youtube video here (click on High Quality option )

    To finish, we are able to run 3DMark 2001 from Cars to Nature non-stop at ~6500MHz Nice chip isn't it?
    It's time to fire up my 9800GX2 again and spend some time on 2D benchs like Superpi 1M

    Tks,
    N3RO
    Last edited by N3RO; 12-27-2008 at 06:09 AM.

  2. #2
    X.I.P.
    Join Date
    Mar 2005
    Location
    Mumbai, India
    Posts
    1,094
    Kick-ass chip man!

  3. #3
    Xtreme Enthusiast
    Join Date
    May 2006
    Location
    Serbia-Belgrade
    Posts
    585
    Nice clocks man
    Do you run any benchmarks?

  4. #4
    Xtreme Enthusiast
    Join Date
    May 2005
    Location
    St.-Petersburg, Russia
    Posts
    517
    Very successful cpu! I hope it will present not one WR for you!


  5. #5
    Registered User
    Join Date
    Oct 2006
    Location
    on my mainboard
    Posts
    39

    tests>E8600...

    good results as yet man,wish you all good luck and benches of course...the chip is not from bad parents
    ...................

  6. #6
    Xtreme Enthusiast
    Join Date
    Nov 2004
    Location
    Poland
    Posts
    571
    6.6GHz and only 1.250v


    Quote Originally Posted by AndreYang View Post
    wtf..your cpu is better.

  7. #7
    Champion
    Join Date
    Dec 2005
    Location
    Budapest, Hungary
    Posts
    1,052
    MaSell lol

    N3RO bro what a chip .... looking fwd to see your 01 results

  8. #8
    Xtreme Enthusiast
    Join Date
    Jun 2005
    Posts
    568
    too slow man , my 5 ghz look poor vs this 6.6 GHz , i must get one of those high clocker E0
    2600K working in 4.8 GHZ so far

    2600k @(4600 Ghz) 1.42v : (under water)
    Asus B2 mobo
    4 GiG DDR 2400 MHZ
    GTX 570 @ 1.063v ( 910/1820/2001 Mhz) .(under water).
    1020 W PSU

    Hobie's : Overclocking .... Overclocking .... Overclocking

  9. #9
    Xtreme Member
    Join Date
    Dec 2006
    Location
    Denmark, Horsens
    Posts
    259
    Jesus, What a chip
    OCTeamDenmark Crew - Cooled and sponsored by CoolerKit.dk

  10. #10
    Brotherhood
    Join Date
    Apr 2005
    Location
    Land Of KADISOKA
    Posts
    1,231
    nice chip you get there ......any stable on 3D bench ?
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  11. #11
    Xtreme Member
    Join Date
    Aug 2005
    Location
    Denmark
    Posts
    366
    Slap me silly,and call me Dorothy.
    That is one sweet chip, you got there.
    OCTeamDenmark.Com

  12. #12
    Xtreme Member
    Join Date
    Mar 2008
    Posts
    279
    Geez...............amazing chip,6.5ghz 3d benchable holy cow
    Intel E8600 E0@420x10(H20)/Abit IP35 Pro/Team Xtreem DDR 2 1066mhz D9GKX@420mhz,5-4-4-11-2T /Crucial Ballistx Tracer DDR 2 800mhz 16FD3@420mhz 5-4-4-11-2T/Gigabyte GTX260 SOC@720/1512/1300/LG SATA DVD-RW/WD 320GB +Segate 1TB/Corsair HX520W/Enlight Lian Li OEM PC7A casew/W65A Side panel
    Liquid cool: Dtek Fuzion V2,Swiftech MCR220,Swiftech Radbox,Swiftech Micro res,Nirox P2800 modded pump,Generic 1/2" ID tubing,3xYate Loon mid speed

    Note:E8500 is 9.5x but cpuz got issue and X2 4600+ is oc with stock cooler,max validation and never push
    9.204's PI

  13. #13
    Xtreme Enthusiast
    Join Date
    Jan 2007
    Location
    Coeur d' Alene, Idaho, USA
    Posts
    585
    WOW! 6.6 is absolutely amazing! That blows my E8600 out of the water.... What is the Batch # and what Vcore did you use?
    "If It Doesn't Overclock Its Broken"
    "NexGen Overclocking"
    "Overclocking, its a life style"

  14. #14
    Xtremely Bad Overclocker
    Join Date
    Jan 2005
    Location
    East Blue
    Posts
    3,663
    wow can't wait for this chip to kickass some awesome '01 and Pi - AM3 should do nice also
    | '12 IvyBridge - "ticks different"... | AwardFabrik IvyBridge round I by SoF | AwardFabrik IvyBridge round II by angoholic & stummerwinter
    | '11 The SandyBridge madness... | AwardFabrik / Team LDK OC-Season 2011/2012 Opening Event
    | '10 Gulftown LaunchDay OC round up @ASUS RIIE | 3DM05 2x GPU WR LIVE @Cebit 2010 @ASUS MIIIE | SandyBridge arrived @ASUS P8P67

    | '09 Foxconn Avenger | E8600 | Foxconn A79A-S | Phenom II 940 BE | LaunchDay Phenom II OC round up
    | '08 7.438s 1m LN2 | AMD 1m WR LN2 | 2nd AOCM | Phenom II teasing
    | '07 100% E2140 | 106.5% E2160 | 100% E4500 | 103% E4400 | 5508 MHZ E6850 | 7250 MHZ P4 641 126.5% by SoF and AwardFabrik Crew all on Gigabyte DS3P c? and LN2...
    | '06 3800+ X2 Manchester 0531TPEW noHS 3201MHZ c? | 3200+ Venice noHS 3279MHZ c? | Opteron 148 0536CABYE 3405MHZ c? all on Gigabyte K8NXP-SLI compressorcooled

    | '05 3500+[NC], 3000+[W], 2x 3200+[W], 3500+[NC], 3200+[V] 0516GPDW

    Quote Originally Posted by saaya
    sof pulled a fermi on all of us !!!

  15. #15
    Banned
    Join Date
    Feb 2008
    Location
    Buffalo, NY
    Posts
    1,622
    sick!

  16. #16
    Registered User
    Join Date
    Oct 2008
    Location
    Sweden
    Posts
    10
    thats sick, GJ!
    E6750@3,7GHz ~ P35-DS4 Rev2 ~ 2GB PC6400 Cas 4

  17. #17
    Registered User
    Join Date
    Oct 2006
    Location
    on my mainboard
    Posts
    39

    E8600!

    Batch Batch???
    ...................

  18. #18
    I am Xtreme
    Join Date
    Feb 2003
    Location
    Netherlands
    Posts
    6,465
    Honestly, i don't know what i like better, the chick or the chip..

    Can i have both....please?
    Last edited by Zeus; 12-26-2008 at 03:42 PM.
    Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB

    Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing

    Case: Murdermodded TJ-07

    sub 9 sec. SPi1M 940BE 955BE 965BE 1090T

  19. #19
    Registered User
    Join Date
    Oct 2006
    Location
    on my mainboard
    Posts
    39

    >zeus

    oh, you`re right, i think so too, probably i was blind
    ...................

  20. #20
    Xtreme Member
    Join Date
    Feb 2006
    Location
    Portugal
    Posts
    432
    vCore was ~1.92v

    Motherboard wasn't tweaked at all... it will take some more time

    Don't PM me with offers.. at least you want to pay 1000~1500€

    Need some pot for my GX2, anyone? and some DDR3 kit.. since I don't have any...

    Thank you all

  21. #21
    Registered User
    Join Date
    Oct 2006
    Location
    on my mainboard
    Posts
    39

    >n3ro

    how much the board asusExtreme gives VCORE??
    ...................

  22. #22
    I am Xtreme
    Join Date
    Feb 2003
    Location
    Netherlands
    Posts
    6,465
    The Rampage Extreme can supply up to 2.4Vcore, should be enough to suit anyone's need.
    Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB

    Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing

    Case: Murdermodded TJ-07

    sub 9 sec. SPi1M 940BE 955BE 965BE 1090T

  23. #23
    Registered User
    Join Date
    Oct 2006
    Location
    on my mainboard
    Posts
    39

    >zeus

    bah 2.4vcore??, what a monster! you can make some experiments with this animal, yes yes this is enough muahah!! my blitz formula is compared to this board a crook
    ...................

  24. #24
    Xtreme Member
    Join Date
    Jul 2007
    Location
    Italy
    Posts
    279
    Congrats guys Nice work and impressive cpu
    http://www.xtremesystems.org/forums/image.php?type=sigpic&userid=55096&dateline=129607  8083

  25. #25
    Xtreme Member
    Join Date
    May 2005
    Location
    earth......among the the others
    Posts
    279
    already posted
    Last edited by steelballzz; 12-27-2008 at 05:08 AM.

    STEELBALLZZ - N3RO - MARTAKIS

    ZÉ DO BENCH TEAM

    add a volt or two.....


Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •