Having a strange problem.. was using P06 BIOS and updated to P09. (problem occurred in both BIOS)
When using sata mode = IDE the system will not accept a BCLK higher than about 160 (sporadically it will work at ~170).. the sytem will hang right after post, with the error code sitting at 8F or 94, seemingly random
but when setting it to RAID or AHCI mode it will boot without problem.
Using mushkin blackline 1600 set to default timings and x8 mem mult. 1.65-1.7 v
Any USB-Drives ?
Bios Reset after Updating ?
Don t use any Saves from a previous Bios.
VTT = +100mV to +150mV
I am on P09 and Sata mode, no issues up to 224Bclk
Looks like it was the hard drive.. new ssd just came in and having no problems so far (with the old hdd unplugged)..
Tags for this Thread