man i would love to see dfi x58 vs foxconn performance comparsion
man i would love to see dfi x58 vs foxconn performance comparsion
found this in an article..
On paper, Bloodrage is shaping up to be an impressive high-end X58 solution. It's scheduled to reach stores early December, and it'll carry a price-tag of around £265 including VAT.
isn't that around 370US
It's not early December any more,..
HWbot - Team: XtremeSystems
XS cruncher - Team: XtremeSystems
OCN Feedback
HEAT
*** Being kind is sometimes better then being right.
As stated before, the Northbridge waterblock is 100% copper with 1/2" barbs. A store here in Japan already had this board but only like 5 of them and by the time I found out they were already sold out. The price on the board here was 27,800 JPY which is about $309 so not bad at all!
http://www.dospara.co.jp/5goods_part...&ic=90044&lf=0
Core i7 920 D0 @ 4833.55Mhz~EVGA "Classified" E760~XFX HD5870~6GB G.Skill Perfect Storm DDR3 2000~Corsair HX1000~2x WD Velociraptor 150GB RAID 0~WD Cavier Black 1TB~Custom Danger Den Water Box Plus~Windows 7 x64 RTM~Dell 2407WFP
H20! CPU Loop: MCP-655~Swiftech MCR-220~HEATKILLER® 3.0 LT GPU Loop: MCP-655~XSPC RS240~EK FC5870 Plexi+Nickel
░█▀▀ ░█▀█ ░█ ░█▀▀ ░░█▀▀ ░█▀█ ░█ ░█ ░░░
░█▀▀ ░█▀▀ ░█ ░█ ░░░░█▀▀ ░█▀█ ░█ ░█ ░░░
░▀▀▀ ░▀ ░░░▀ ░▀▀▀ ░░▀ ░░░▀░▀ ░▀ ░▀▀▀ ░
I got some info about the price. It should be ~300 USD. It is really cheap, if it will be so.
More tests coming today. I got some things fixed now
You are as good as your samples are!
what's wrong with you guys? 300 bucks for a mb? how's that cheap!?
Foxconn has so ty attitude for Finnish market so many people wo´nt be buying their boards around here, no matter how good they are.
But they do´nt need Finnish market as they are aiming for larger selling areas.
Last edited by BulldogPO; 12-22-2008 at 05:45 AM.
It's meant to be cheap for an X58.^^
I payed like 250,-€ for my DFI nF4 eXpert when it came out, iirc.
Look at Rampage II *cough* $400 *cough* and yet it has hardware configuration problems -.-
Yeah I agree, it happened with 790i Dreadnought so much hype and never was launched... tho there was an article saying that Foxconn has problems with their departments, marketing is way ahead of others, thats why you see so much paper launch
Last edited by Blacky; 12-22-2008 at 06:10 AM.
Yeah, this mobo is cheap in my opinion if you look at what you are getting compared to other x58 options out there!
Saaya mentioned earlier the same thing about their departments and that China always delays when it comes time to send the product out!
On another note, has anyone found pictures of what the drive bay thing for the Bloodrage looks like when it is on?
Core i7 920 D0 @ 4833.55Mhz~EVGA "Classified" E760~XFX HD5870~6GB G.Skill Perfect Storm DDR3 2000~Corsair HX1000~2x WD Velociraptor 150GB RAID 0~WD Cavier Black 1TB~Custom Danger Den Water Box Plus~Windows 7 x64 RTM~Dell 2407WFP
H20! CPU Loop: MCP-655~Swiftech MCR-220~HEATKILLER® 3.0 LT GPU Loop: MCP-655~XSPC RS240~EK FC5870 Plexi+Nickel
Why wouldn't High End motherboard cost over 300€. People pay 600€ for a high end VGA and 1200€ for high end CPU. Come on.. that is the old way of thinking.
It's not about "that" attitude. Finland is really small market area. There is like 5 people buying these boards Seriously.. I will ask this from Michael Kruitnof who is doing deals with our shops. Jimm's was supposed to sell Foxconn products already, but I have no idea what went wrong.
Like this board, rampage extreme offers you the ultimate platform for Core i7, so no need to bash the prices.
Dreadnought was canceled, cause 790i chipset was pile of "****" . If you can't have enough working chips, there is no idea of selling high end motherboards. But still, paper launch is wrong word.
You are as good as your samples are!
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero
ultimate platform for Ci7? R2E (at least mine) is clocking memory like crap. Give me any kit of ram and I can guarantee I can't get more than ~100mhz over the top, nor tighten timings, at any voltage. I've had 2 different types of chips, D9JNL and Elpida, both exhibited the same pathology. I'm about ready to change it out for this board if it can clock ram better.
I am going to switch my work rig to a i7, so I can't wait for the blodrage, it's between that and the Evga, which is 300 tooo
I can't wait till it hits the market, got my eyes peeled. Also love that red and black design, it would stoke in my H2go...
HWbot - Team: XtremeSystems
XS cruncher - Team: XtremeSystems
OCN Feedback
HEAT
*** Being kind is sometimes better then being right.
Last edited by BenchZowner; 12-24-2008 at 04:00 PM.
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero
saaya said it would be 1/2" fittings^^
I have 13/19mm tubing here - 11mm wold be way to small to fit.
Damn at 300 that will be my top choice if i get a ATi card, if i get the new 295GTX it will be between the Bloodrage and the evga... choice choice :/
After looking at the manual the only way that I see to update the BIOS is by using a utility called Fox LiveUpdate. Is this the only way to update the BIOS? My guess is that all Foxconn motherboards use the same utility so has there ever been any problems using this utility to update the BIOS in Windows? So far this is the only concern that I've got.
| Intel Core i7-2600K | ASRock P67 EXTREME4 GEN3 | G.SKILL Sniper Series 8GB (2 x 4GB) DDR3 1866 | EVGA GTS 450 |
| Swiftech APOGEE Drive II CPU Waterblock with Integrated Pump | XSPC RX360 | Swiftech MCP655-B Pump | XSPC Dual 5.25in. Bay Reservoir |
| Thermaltake 850W PSU | NZXT SWITCH 810 | Windows 7 64-bit |
[SIGPIC][/SIGPIC]
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero
| Intel Core i7-2600K | ASRock P67 EXTREME4 GEN3 | G.SKILL Sniper Series 8GB (2 x 4GB) DDR3 1866 | EVGA GTS 450 |
| Swiftech APOGEE Drive II CPU Waterblock with Integrated Pump | XSPC RX360 | Swiftech MCP655-B Pump | XSPC Dual 5.25in. Bay Reservoir |
| Thermaltake 850W PSU | NZXT SWITCH 810 | Windows 7 64-bit |
[SIGPIC][/SIGPIC]
When you download bios file, you will have all needed files for flash. Just use bootable usb stick, put all files in and you are ok. (It will flash your bios automatically)
I have used Foxliveupdate and there is no problems. Of course you have to be sure, that your current settings are stable
You are as good as your samples are!
Core i7 920 D0 @ 4833.55Mhz~EVGA "Classified" E760~XFX HD5870~6GB G.Skill Perfect Storm DDR3 2000~Corsair HX1000~2x WD Velociraptor 150GB RAID 0~WD Cavier Black 1TB~Custom Danger Den Water Box Plus~Windows 7 x64 RTM~Dell 2407WFP
H20! CPU Loop: MCP-655~Swiftech MCR-220~HEATKILLER® 3.0 LT GPU Loop: MCP-655~XSPC RS240~EK FC5870 Plexi+Nickel
Bookmarks