G.SKILL DDR3 PC12800 CL9 6GB kit

[SF3D]

I got this memory kit from G.Skill. It is targeted to Corei7 platforms only. Reference voltage is 1.5V, so there will be no worries about killing anything.

Here is some specs from the site:

CAS_Latency: 9-9-9-24
Capacity: 6GB (2GB x 3)
Speed: DDR3-1600 (PC3 12800)
Voltage: 1.5~1.6 Volts
PCB: 6 Layers
Registered/Unbuffered: Unbuffered
Error_Checking: Non-ECC
Type: 240-pin DIMM
Warranty: Lifetime

Here is product page:
http://newgskill.web-bi.net/bbs/view...desc=asc&no=48


Test setup will be following:

ASUS Rampage II Extreme/ P6T Deluxe / Foxconn Bloodrage
Core i7 965

Here is the pictures which I like to show to you:











Sorry about the quality. I had to resize them to really small JPEG's.

Results will come as soon as I have time to finish my test

[SF3D]

Here is basic 1.5V 1600MHz 9-9-9-24 1T bandwidth:

[herderien]

i have the same kit in 3x1 Gb and very happy with it...very good price / quality ratio

have you checked the OC potential of it ?

[SpazBoy357]

Link is broken, can you check it, please?

[SF3D]

herderien- Haven't tested much oc yet.

Spazboy357 - Link is working perfectly fin in here. I hope you can see it now.

[Benji Tshi]

Really interesting...I can't find any sexy kit, so i'm gonna buy a standard one, waiting for pretty mushkin/ocz :p

[Revv23]

OC already!!!

Nice pics BTW

[pcaddict]

9-9-9-24 latency? O_o

I'm going to buy these: http://www.jimmspc.fi/tuote/AD31600X...1&subgroup=145

[SF3D]

OC already!!!

Nice pics BTW

Thanks! OC results coming soon!

9-9-9-24 latency? O_o

I'm going to buy these: http://www.jimmspc.fi/tuote/AD31600X...1&subgroup=145

I have those A-Data memories here. When you use tri channel, latencies are not so important for basic 24/7 use or even when overclocking. Extreme oc is different story like always, but still the gain is little in benchmarks.

This ram kit will be ~250€, so we should not compare this set for 450€ rams

[Cold Fussion]

Have you got any overclocking numbers for our viewing pleasure?

[Aberration]

1.5V wow. And some were worried before i7 launch that 1.65 was too low.

[sargatanas]

alrdy have one of these sets and im happy with em ^^ ....maybe i should get a second one =)

[Fitseries3]

anyone know what ICs those are?

[SF3D]

Sorry guys! I haven't updated this thread, cause I just can't overclock these sticks at all in my P6T. It might be mobo + memory bug, but I will try these on Foxconn Bloodrage very soon.

Let's not lose our hope yet

[NightRaven]

oh gskill remarked...

i have the 12800 cl8 3gb n 6gb and they are sec ics

gonna test them soon

[Booj]

I have a set of these. It's not ram that will pull any WR's but it's good value for money

Max clocks i've got is around 920mhz 9-9-9-24 1t. Any further is difficult. Probably needs more uncore voltage. I havent tried much with tighter timings. cas 7 struggled to boot at 700 or so mhz

They're happy priming @ 900mhz 9-9-9-24 1t with 1.6v

[Slovnaft]

what uncore voltage?
3600 shouldn't be too stressful for uclk

[Booj]

I think about 1.44v. There's a few other things to try. Loosen trfc, try lower bclk and 12x ram etc.. trying to find the time though...