*HOT* | Corsair DOMINATOR GT | 6GB (3x2GB) | DDR3-2000 7-8-7-20 @ 1.65V | *HOT*

[Big Myke]

I recieved an email form corsair saying that they are in stock. I placed my order and waiting for a tracking number. Make sure you guys are on the waiting list and not waiting to see them show "in stock" on the website.

[dirtypop]

I gave them my e-mail addy. How do I "make sure I'm on the waiting list?"

[Big Myke]

Thats all you can do. I've went as far as using 3 email accounts. I received a tracking number within 3 hours of purchase. I wish you luck man. I've waited a couple weeks .

[azza21]

I recieved an email form corsair saying that they are in stock. I placed my order and waiting for a tracking number. Make sure you guys are on the waiting list and not waiting to see them show "in stock" on the website.

What...i never recieved any e-mail from them. I have done so before but on the 1800 set. Bachus mentioned they'd get some stock in last week but i have yet to see any online.

[MikeMK]

OCUK actually had some of these in stock, so I grabbed a set of 2000mhz 8-8-8, which should be here on Thursday! Saved me shipping from the US which is a bonus - I must admit i was suprised to see them as I didnt think corsair was sending GT's to resellers!

[DMH]

OCUK actually had some of these in stock, so I grabbed a set of 2000mhz 8-8-8, which should be here on Thursday! Saved me shipping from the US which is a bonus - I must admit i was suprised to see them as I didnt think corsair was sending GT's to resellers!

Probably resellers are buying them from corsair shop and selling them

[Sadasius]

Question: I still have not upgraded to the i7 yet and frankly still not really enthusiastic about it yet. But to help the transition a little I was wondering if I could use 2 of these sticks in my X38 board and work like dual channel ddr3 ram? This way when I do make that transition it will be that much cheaper. Thanks in advance!

[tonyluu]

Question: I still have not upgraded to the i7 yet and frankly still not really enthusiastic about it yet. But to help the transition a little I was wondering if I could use 2 of these sticks in my X38 board and work like dual channel ddr3 ram? This way when I do make that transition it will be that much cheaper. Thanks in advance!

It will work but the max voltage for the DRAM will be higher than 1.65v (I would say stay under or around 1.9v if you want the kit to last you awhile)

[Sadasius]

Cool thanks! Will be picking this kit up on Newegg!

[Gautam]

They FLY on older chipsets

[dinos22]

They FLY on older chipsets

screens or it didnt happen

[User111]

[C3]

You can find my DominatorGT 1866 results here

[Dinho Fatal1ty®]

Beautiful!!! GT very cool

[MikeMK]

Well, my 2000mhz 8-8-8 GT's arrived yesterday. Not had long with them so no extensive results yet. But i got them up to 2000mhz and I'm pretty impressed so far!



I can get 4ghz Prime stable with the GT's at 1910mhz absolutely fine. The above settings are taking considerably more uncore I think, which leads me to a question. How much is too much uncore for 24/7 use?

[eva2000]

Taming the GT beasts on DFI UT X58-T3EH8

Did 2 runs on fresh Win 7 64bit RC install I did last night. Only change was CPU VTT voltage needed to pass Hyper Pi 8x 32M vs 4x 32M.

1. 8x 32M Hyper Pi HT Enabled - CPU VTT = 1.44v
2. 4x 32M Hyper Pi HT Disabled - CPU VTT = 1.47v needed more for 4x32M HT Disabled

RTL value for channel A changed when CPU VTT changed from 1.44v to 1.47v

RTL A/B/C = 56/57/58


RTL A/B/C = 55/57/58


Past bioses and tests, I found memory bandwidth in memtest86+ v2.11 was higher with HT disabled than HT enabled, so could explain why more CPU VTT volts is needed for HT disabled.

4//28 looking sweet indeed 8x 32M Super Pi instance via HyperPi @DDR3-2080Mhz 7-8-7-20 1T at 1.725v bios set vdimm = 1.730v real DMM vdimm.

[cstkl1]

vtt 1.4v
tRD 54/55/57


think i finally get this mobo..

funny it was the classified that was giving me hints.

[cstkl1]

rtl 54/55/57 vtt 1.35v (dmm read.. )



its just nuts this one stupid setting..
and everything turns gold

[Kabauterman]

Hello Guys,

on Monday I recived our new GT 2000C7 Kit
here is my first test result from today with only 1,8V

[Kimofil]

Any 2000GT7 kit can do this or not?

[eva2000]

Any 2000GT7 kit can do this or not?

Mine can't at 7-7-6-x but it could be memory controller related. Either way at 7-8-7-20 1T still faster 32m time than that 7-7-6-20 heh.

[Kimofil]

Mine can't at 7-7-6-x but it could be memory controller related. Either way at 7-8-7-20 1T still faster 32m time than that 7-7-6-20 heh.

Thats interesting. Can you kit do 7-7-7-20 1T on stock voltage?

[eva2000]

7-7-7-20 1t maxes out for me around 954-965mhz for super pi 32M while 7-8-7-20 maxes out around 1104mhz 32M pi

[Kimofil]

7-7-7-20 1t maxes out for me around 954-965mhz for super pi 32M while 7-8-7-20 maxes out around 1104mhz 32M pi

That seems 7-8-7-20 1T really faster in 32m then 7-7-6-18 1T. Interesting observation.

[cstkl1]

That seems 7-8-7-20 1T really faster in 32m then 7-7-6-18 1T. Interesting observation.

its probably a subtiming and skew issue

look at r2e. CL8 can fly cl7 is hard at 2000mhz.