Last edited by GAR; 02-25-2009 at 07:29 PM.
Finally we should make this the official thread, Gar have you checked out the new bios? I am thinking there are some quirky little things with F3 that need to be rectified for sure....
Umm the bios is in German or Netherlands or at least the extractor is what's up with that??
Last edited by Guacamole; 11-26-2008 at 07:05 PM.
Current:
Asus P6T-Deluxe
Core i-7 920 (do) at 4.2Ghz
6 GB Kingston 2000
Fatality Titanium X-fi
Antec Quattro Pro 1000W
Diamond 5970
Asus 5870 (reference)
MM Duality-EK-Thermochill
Current:
Asus P6T-Deluxe
Core i-7 920 (do) at 4.2Ghz
6 GB Kingston 2000
Fatality Titanium X-fi
Antec Quattro Pro 1000W
Diamond 5970
Asus 5870 (reference)
MM Duality-EK-Thermochill
Does this board support SLI?
ok so i passed a couple of hours of prime at 3.8ghz, 19x200qpi, but when i shut down and boot up, the bios resets itself, anyone else have this problem??? And i am not liking the long time it takes for the board to boot. I guess i will get used to it, hopefully future bios's will help the issue, since this board does seem to be the most popular because of all the features, 10 sata ports, 3way sli/crossfire.
Last edited by GAR; 11-26-2008 at 08:12 PM.
My bios doesn't actually reset but it is retarded I am working on 4.0Ghz at 211Bclk X 19 Multi but when I restart from windows no problem but if I shut the system down and then start it up again it does this weird thing where it starts for a second then shuts down, then starts again and then it will try and post then repost another time and finally I get a beep and away we go but all my settings seem to stay and work fine.. It definitely needs some improvement..... I don't think your bios resets just let it roll and it will boot just all quirky like.. The thing that sucks is that it doesn't do that crap at stock...
Current:
Asus P6T-Deluxe
Core i-7 920 (do) at 4.2Ghz
6 GB Kingston 2000
Fatality Titanium X-fi
Antec Quattro Pro 1000W
Diamond 5970
Asus 5870 (reference)
MM Duality-EK-Thermochill
For me it only resets when something is not stable. For some od reason though if I overclock to much it restarts after failing a boot and then it turns off and stay off, and a yellow light comes on by the memory. I have to unplug the psu and wait till it shuts down and then I can restart the pc.
Current:
Asus P6T-Deluxe
Core i-7 920 (do) at 4.2Ghz
6 GB Kingston 2000
Fatality Titanium X-fi
Antec Quattro Pro 1000W
Diamond 5970
Asus 5870 (reference)
MM Duality-EK-Thermochill
Hey Gar do you have 4.0Ghz Stable yet? I think I just got it I will post my settings in a few on all the different threads but I just hit 2 hours Prime Stable at 211 Bclk X 19 Multi. This board is running like a champ and the best part is I left everything on auto this round and it has been flawless...
Current:
Asus P6T-Deluxe
Core i-7 920 (do) at 4.2Ghz
6 GB Kingston 2000
Fatality Titanium X-fi
Antec Quattro Pro 1000W
Diamond 5970
Asus 5870 (reference)
MM Duality-EK-Thermochill
Just ordered my Extreme 10 min ago, along with the 3x1 Patriot 1600's and an 920. Should make for some fun.
GB 790XTA UD4
GSkill Pi Black 2000 Cas9
ASUS 4870
Enermax Revolution 1050+
http://www.heatware.com/eval.php?id=67661
That's what is in my EX58 setup. The blue Patriot 3x1GB 1600 Ram and a 920.
http://www.xtremesystems.org/Forums/...light=gigabyte
ya I am on f3 bios, I have a 965 cpu and the extreme mobo..
Another things its done this with every setup I have had. If I try to restart my system right after shut down I get a yellow light. 790i ultra, 790i ftw digital and now this mobo. I think its the psu, it works fine otherwise....
Thats great news guacomole, look forward to seeing your settings then testing them myself.
Current:
Asus P6T-Deluxe
Core i-7 920 (do) at 4.2Ghz
6 GB Kingston 2000
Fatality Titanium X-fi
Antec Quattro Pro 1000W
Diamond 5970
Asus 5870 (reference)
MM Duality-EK-Thermochill
Current:
Asus P6T-Deluxe
Core i-7 920 (do) at 4.2Ghz
6 GB Kingston 2000
Fatality Titanium X-fi
Antec Quattro Pro 1000W
Diamond 5970
Asus 5870 (reference)
MM Duality-EK-Thermochill
that temp is right? wich cooler? is normal for Ci7 to have high temps like that?
Nice over anyway.
Hi
which bios version are people using
i have stoped @ 190 x 20 which seems to be the sweet spot for temps & volts for now
it would lock up on the first screen @ 200 x 20
will work @ 211 x 19 but need much higher volts
still waiting for fuzion v1 1366 bracket
i am wondering if its worth changing to a Ek Supreme or swifteck gtz with the 1366 bracket
Coolermaster 700D
Water cooled CPU & graphic card
Thermocill 320 & 240 Rad , DDC ultra pump
I5 2500K L046B582 @4.8
asrock Z77 Extreme 6
4 gig Ripsaw 1600
Corsair C300 128 SSD Boot Drive
Samsung F3 1TG
5870 W/C @ 1000 & 1250
I got same problem with easytune not starting, it return immediatly a app crash , tried 4 OS installs with even 2 diffrerent vista x64 version(one integrated october and one old sp1 release).
Drivers also no matter installed them in multiple combinations or with just chipset driver and easytune after without no other driver.
Must be a hardware combination giving the prob for sure.
I got an ati 4870 , 12 GB ram corsair and a Vraptor.
Even the advance powersave software no start it return at start version of software no updated download a new one from gigabyte site, this with bios F2-F3 -F4D -F4E.
Installing water on the weekend for test some 4ghz+
I am on a ga-x58-extreme, confirming the windows initialization failed error
Last edited by Ghigo; 11-27-2008 at 02:30 AM.
Bookmarks