Page 1 of 3 123 LastLast
Results 1 to 25 of 53

Thread: MSI Wind Netbook + LN2... huh?

  1. #1
    PIfection
    Join Date
    May 2006
    Posts
    989

    MSI Wind Netbook + LN2... huh?




    yo! yeah its another stupid idea from Team Australia...

    Get a msi wind notebook that has some preety nice overclocking abilities, a stick of ddr2 so-dimm and some ln2 and see what happens..

    - pfffft

    Setup:
    MSI Wind U100 Netbook
    Kingston 2GB DDR2 667Mhz SO-Dimm
    Astra!

    First to remove the back... Putting new thermal paste and leaving the back off with pedistal fan blowing onto mobo takes my temps from 45~ to 19 idle and 29 loaded.







    Alot of grease and a little plastik spray just to make sure..

    my cpu temp measure point.. the pot is situated right on top of the gpu/chipset but cold transfer from the plate goes to cpu and also right next to the rams. the rams are covered in grease of course..
    Discover the new deals of Kroger Ad for more grocery savings.



    i needed a stand so (a) i could press the on off button, (b) i could get into bios if required..








    no gains over about -15, chip must have been subzero at this stage.. realtemp reads 4 degrees since base of pot read about -4....



    result? 2315mhz.. afaik its fastest speed of atom processor in notebook or desktop board.. also 2385mhz camera screens..

    2315mhz Intel Atom N270



    dont try this at home.. maybe warranty covers you changing your own rams but not this perhaps
    Last edited by StyM; 10-21-2020 at 02:16 PM.

  2. #2
    ODOC
    Join Date
    Aug 2006
    Location
    Copenhagen - Denmark
    Posts
    2,189
    awesome work pro

    its good to see your back and doing strong

    keep pushing it

  3. #3
    Turkey Man
    Join Date
    Mar 2005
    Location
    Jakarta (ex-Australia)
    Posts
    2,560

  4. #4
    -100c Club
    Join Date
    Jun 2005
    Location
    Slovenia, Europe
    Posts
    2,283
    Good job pro, next time let's see some Pi1M!

    You just made news: http://www.oc-lab2.com/novice.php?n=664

    Next time do the Vcore & Vnb mods, the PWM bucks should be near.
    Last edited by tiborrr; 11-25-2008 at 03:22 AM.

  5. #5
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    whatha? heheheh
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  6. #6
    Champion
    Join Date
    Jun 2003
    Location
    cape town
    Posts
    1,172
    wow...someone give the man some real hardware!

  7. #7
    L-l-look at you, hacker.
    Join Date
    Jun 2007
    Location
    Perth, Western Australia
    Posts
    4,644
    Haha, doing it for the lulz. Nice job mate
    Rig specs
    CPU: i7 5960X Mobo: Asus X99 Deluxe RAM: 4x4GB G.Skill DDR4-2400 CAS-15 VGA: 2x eVGA GTX680 Superclock PSU: Corsair AX1200

    Foundational Falsehoods of Creationism



  8. #8
    Registered User
    Join Date
    Aug 2006
    Location
    Australia
    Posts
    77
    Quote Originally Posted by s e t h View Post
    wow...someone give the man some real hardware!
    Hehehe, the memory is on its way and so is the hold down bracket for the CPU pot

    Grats pro; it's a real shame that we couldn't do this the first time around while I was in Adelaide (sigh @ DOA!) but it's good to see this one finally ticked off.

    Now it's time to volt mod this lil bugger and keep going
    Team.AU
    Drunken benching well below zero!

  9. #9
    Champion
    Join Date
    Dec 2005
    Location
    Budapest, Hungary
    Posts
    1,049
    haha, you was bored or whats going on

  10. #10
    Xtreme X.I.P.
    Join Date
    May 2004
    Location
    Hammel/Denmark
    Posts
    2,060
    Lol....priceless YP
    The whole world's hip and thats not cool !

    Rip Van Hippy

    Doesn't expecting the unexpected make the unexpected the expected ?

    Light travels faster than sound. This is why some people appear bright until you hear them speak


    -------------------------

  11. #11
    Xtreme Mentor
    Join Date
    Apr 2003
    Location
    Ankara Turkey
    Posts
    2,631
    i want this kind of stupid ideas

    wonderful try


    When i'm being paid i always do my job through.

  12. #12
    Registered User
    Join Date
    Sep 2008
    Posts
    24
    Niiice work Youngpro !! Thats what Im talking about just doing it because YOU CAN !! Sick as always .
    GA-EP45-UD3P
    2X2gb G Skill Pi 8800 @ 1056 1.9v
    HD4850 @ 802 /1050 1.34v
    E8400 1.29v 4224mhz @ 528! fsb(2112) 1:1


  13. #13
    Xtreme Enthusiast
    Join Date
    Jul 2006
    Location
    alpena, michigan
    Posts
    510
    good to see you back thats just crazy lol. i guess now theres a whole new type of benching.
    cpu: 2600k@ 4.5ghz
    mobo: asus p8p67 deluxe
    ram: gskill ripjaw x F3-10666CL7D-8GBXH
    gfx: gigabyte gtx460
    psu:corsair 520hx
    case: antec 900
    cpu cooling: Prolimatech Megahalems Rev.B

    500mhz cas 3 club: http://valid.x86-secret.com/show_oc.php?id=235630
    p4 511 2.8ghz@ 5004mhz :http://valid.x86-secret.com/show_oc.php?id=124434
    p4 541 3.2ghz@ 4909mhz :http://valid.x86-secret.com/show_oc.php?id=157470

  14. #14
    Xtreme Member
    Join Date
    Aug 2006
    Posts
    318
    This is so awesome as it is wrong
    i5 660 / Asrock P55M Pro / Ripjaws / GTS250

  15. #15
    Xtreme Enthusiast
    Join Date
    May 2006
    Location
    UK
    Posts
    706
    you don't get more extreme than ln2 on a laptop, nice one mate i Liiiiiikkkkkke it





  16. #16
    Xtreme Enthusiast
    Join Date
    Apr 2008
    Posts
    912
    Awesome. Atom-ic power!

    Now let's see the world's first Atom at 3GHz.

  17. #17
    Registered User
    Join Date
    Aug 2008
    Posts
    28
    haha great idea extreme netbook

    Could this be done without LN2?

  18. #18
    Xtreme Addict
    Join Date
    Feb 2008
    Location
    Russia
    Posts
    1,910
    Youngpro creates the next stage in overclocking?
    Well done, Pro

    Intel Q9650 @500x9MHz/1,3V
    Asus Maximus II Formula @Performance Level=7
    OCZ OCZ2B1200LV4GK 4x2GB @1200MHz/5-5-5-15/1,8V
    OCZ SSD Vertex 3 120Gb
    Seagate RAID0 2x ST1000DM003
    XFX HD7970 3GB @1111MHz
    Thermaltake Xaser VI BWS
    Seasonic Platinum SS-1000XP
    M-Audio Audiophile 192
    LG W2486L
    Liquid Cooling System :
    ThermoChill PA120.3 + Coolgate 4x120
    Swiftech Apogee XT, Swiftech MCW-NBMAX Northbridge
    Watercool HeatKiller GPU-X3 79X0 Ni-Bl + HeatKiller GPU Backplate 79X0
    Laing 12V DDC-1Plus with XSPC Laing DDC Reservoir Top
    3x Scythe S-FLEX "F", 4x Scythe Gentle Typhoon "15", Scythe Kaze Master Ace 5,25''

    Apple MacBook Pro 17` Early 2011:
    CPU: Sandy Bridge Intel Core i7 2720QM
    RAM: Crucial 2x4GB DDR3 1333
    SSD: Samsung 840 Pro 256 GB SSD
    HDD: ADATA Nobility NH13 1GB White
    OS: Mac OS X Mavericks

  19. #19
    take me to the manbar
    Join Date
    Apr 2008
    Location
    South Africa :)
    Posts
    1,179
    amazing! you go where no man has gone before

    keep it up! excellent results!!!!!!

  20. #20
    Xtreme Addict
    Join Date
    Aug 2005
    Location
    Somewhere on earth between Taipei, Paris and Montreal
    Posts
    1,194
    ah ah pro you are amazingly crazy guy xD !

    Nice results anyway !
    Overclocking-TV Staff
    Quote Originally Posted by hipro5 View Post
    Ha, ha, ha.....NO WAY.....When I show someone preparing to take a shot, I hided the cigarette....

  21. #21
    Registered User
    Join Date
    Aug 2008
    Location
    North-west, Russia
    Posts
    13
    wow, nice results!
    awesome work!

  22. #22
    Registered User
    Join Date
    Apr 2008
    Location
    Sweden
    Posts
    93
    atom on ln2 Me like!

  23. #23
    Champion
    Join Date
    May 2006
    Location
    Bangkok, Thailand
    Posts
    1,375
    Hewwww.... nice stuff and greats results from first start Pro

    looking forward to benching results
    Sorry For My English
    OverclockZone Team
    THAILAND

  24. #24
    Xtreme Member
    Join Date
    Aug 2006
    Posts
    211

    Question

    AT 2.3GHz will it run 1080p videos properly?

  25. #25
    Xtreme Member
    Join Date
    Jun 2008
    Location
    Sunshine Coast, Australia
    Posts
    149
    Haahaha, good reuslts mate

Page 1 of 3 123 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •