athlon64 overclock record. all owners please post

[JacobHansen]

That depends of the Cooling.

If you have som Prometeia then about 27-2800 Mhz..
If you get a lucky chip 2850.2900..
2900 at MAX...


On air 2500 Mhz..

I think..

[Pedro Rocha]

This is the max stable of my 3200+ without the VMod on the memory (only 2.7v).

[JacobHansen]

Pedro

What mobo are you Using?

[OPPAINTER]

Originally posted by Epsilon
Damn nice score's OPP
23k on stock XT is nice

Running 288fsb on a gigabyte or shuttle?

Gigabyte, but I can't get w2k to load and I'm running XP. I have to try another type of mobo.

OPP

[Pedro Rocha]

Originally posted by JacobHansen
Pedro

What mobo are you Using?

Gigabyte K8N "non pro" (really unexpensive - 90 Euros)

[Astennu]

Originally posted by OPPAINTER
Gigabyte, but I can't get w2k to load and I'm running XP. I have to try another type of mobo.

OPP

And the heatspreader was removed ? Verry nice resulds from both you guys

Pedro Rocha What is the stepping of your cpu that thing rox

[Happy^]

Tak JacobHansen
Godt nok at her er andre fra lille DK


I have H2O Cooling - EVO360 and soon i will get a Maze4 that will fit on my 3400+.

Should i could reach 2500Mhz with a Chaintech mobo ??

[Epsilon]

With a bit of luck u will even get 2600 or 2650. I have seen some A64's run @ 2600 on WC .

2500 is very doable with some big-ass aircooling. With that WC u will be able to get that without any real struggle i think .

[Happy^]

Sounds NICE!!!

I will post some results when i got some :d

[JacobHansen]

nice - Jeg håber du kommer højt.

I hope you will reach some high mhz

[kakaroto]

I've bought a Gigabyte K8N pro motherboard and I would like to change the memory timings...
But in the original bios I cannot do that.

Does anybody know how to change them?

[Happy^]

Tom's Hardware just made a review of four chipset:

http://www.tomshardware.com/motherbo...105/index.html

[OPPAINTER]

Originally posted by kakaroto
I've bought a Gigabyte K8N pro motherboard and I would like to change the memory timings...
But in the original bios I cannot do that.

Does anybody know how to change them?

You need to hit ctl-F1 when your in your bios.

OPP

[althes]

I am going to sell some stuff and see if I cna get a a64 or would it be better to get a fx-51

[kakaroto]

Pedro/OPP:

Are you using a PCI controller like promise? Or have you tryed not using the PCI controller card?

I've got the same motherboard as you (k8N pro), but I can't go beyond 225MHz HT.
Might it be the PCI thats not locked??


I set VDDQ tot +1v, VHT to +1 and Vdimm to +3v.

[OPPAINTER]

I'm useing both, right now I'm testing with just a IBM on one of the IDE ports. No problem at 290 FSB.

OPP

[kakaroto]

Originally posted by OPPAINTER
I'm useing both, right now I'm testing with just a IBM on one of the IDE ports. No problem at 290 FSB.

OPP

So there is a lock, or your HD is very tolerant.
Which bios version are you using?

I'm now testing 220x10 with 1,65v. No probs in windows.
But when I set 230, I can't go further then the post. (blue screen)

Is the VDDQ and VCC12_HT important with OC? and what is the best LBT speed?

[kakaroto]

Originally posted by MickeyMouse
drop "LDT" from 3x to 2.5x or if at 2.5x to 2x the fsb will now move alot high depending the cpu can run the faster MHZ..

best bet do this

max vcore
max vdimm
set ldt to 2x via the bios post at 215-220mhz fsb

use clockgen in windows to see the max "STABLE" the fsb you can achive

I bet you pass 230mhz if the cpu can handle the new speed same goes for ram

BTW what DDR are ya runing ?

My mobo is not yet been modded.

vDDQ and VC12_HT is set to +0.2v.

My memory is running at 191MHz @230FSB.
This is because i have PC2700 memory and I can't swith to 1:1....

I think with a mod I wil come a lot further, because now I need more Vcore and more Vdimm to run my memory @400MHz 5-2-2-2.

[kakaroto]

Originally posted by MickeyMouse
lol im not talking about any mods ther eis a bios setting for

HT/LDT 3x/2.5x/2x or maybe its like this
600mhz/400mhz/200mhz lower that

also drop that ddr that is hoildiing you wayyyyyyyyyyyy back get real ram that is "MADE" to run with the full speed of thre onchip ddr controler. q

I know, this ram only get fast with high voltages...
It can max out to 500MHz with 3.3/3.4v. (5-2-2-2)

Im now looking for BH-5 memory.
And thanks!

[Soulburner]

250 2-2-2-5 is normal for BH5 at 3.3v.....

You sure BH5 will do any better than what you have?

That's a damn nice clock for Infineon 2700...

[kakaroto]

Originally posted by Soulburner
250 2-2-2-5 is normal for BH5 at 3.3v.....

You sure BH5 will do any better than what you have?

That's a damn nice clock for Infineon 2700...

I haven't try 3.35v and higher on my Infineon USA PC2700.
On my 4pda2+ I maxed out 490MHz 5-2-2-2 3.34v
But a to high DDR voltage might damage the onchip memory controller...

But the BH-5 will do better at lower voltage than my Infineon.

[Astennu]

Originally posted by kakaroto
I haven't try 3.35v and higher on my Infineon USA PC2700.
On my 4pda2+ I maxed out 490MHz 5-2-2-2 3.34v
But a to high DDR voltage might damage the onchip memory controller...

But the BH-5 will do better at lower voltage than my Infineon.

Verry nice clocks there I'm doing 233 @ 3.1 @ my pc3500 ( BH - 5 Corsair )

[SoundWave]

What can I expect to hit?

Just got my 3000+ (0344) and receiving my Chaintech nForce3 tonight.
I've got some Corsair PC3200 TwinX (Ver. 1.1), VapoChill XE and WaterChill for the NB.

Without a VMOD - is 2400-2500 possible?

[s e t h]

Soundwave - with that new chip 2400-2500 should be attainable. especially with below ambient cooling. post results later?

[SoundWave]

MickeyM. Where Can I find your guide. I'm not that skilled in MOD's but I know someone who can do it for me.