Has anyone ever used this in place of nail polish or grease? i thought it was liquid electrical tape when i bought it (stupid box) turns out it looks like liquid poop, but it dries waterproof, pics:
How it dries:
Can:
Box:
whatchall think? when i look at it it seems to be a bit too permanent for my likings :S
CM Stacker 830 Classified Scheme *In Progress*
Antec TPQ-1000
i7 950
OCZ Reaper 3x2gb 1066 7-8-8
Crucial C300 128gb
HD5850
Asus Xonar Essence STX
I've never personally used that 3M product. Since you didn't state it in your post; What did you plan to use the liquid electrical tape for? I'll assume protecting your mother board from condensation?
look for the eraser insulation thread here on the forum, much easier to remove for RMA and isnt a complete mess
i9-10900k@5.3ghz//MSI MEG z490 Unify//32GB Gskill TridentZ b.die@DDR4666//RTX 2080ti(+150/+700) kingpin bios//Samsung 970 Pro//Corsair AX1200i
Custom Loop: Dual DDCs->Dual EK XE360 w/GT's -> HK IV CPU -> HK IV GPU ->EK X3 Res controlled by Aquaero 6
ya i was gonna use it for mobo protection, thx for the refrence circa
CM Stacker 830 Classified Scheme *In Progress*
Antec TPQ-1000
i7 950
OCZ Reaper 3x2gb 1066 7-8-8
Crucial C300 128gb
HD5850
Asus Xonar Essence STX
here ya go in case it got buried
http://www.xtremesystems.org/forums/...d.php?t=201916
i9-10900k@5.3ghz//MSI MEG z490 Unify//32GB Gskill TridentZ b.die@DDR4666//RTX 2080ti(+150/+700) kingpin bios//Samsung 970 Pro//Corsair AX1200i
Custom Loop: Dual DDCs->Dual EK XE360 w/GT's -> HK IV CPU -> HK IV GPU ->EK X3 Res controlled by Aquaero 6
Eraser and dielectric grease in the socket, along with some on the CPU pins.
wow i really like that eraser idea! thats ingenious. i do have a question when it comes to the socket. im using a LGA775, do i need to put dielectric on the whole bottom of the proc? just the open connections on the bottom? in the entire socket or just the middle? im going to be using this 24/7 so go based on that.
CM Stacker 830 Classified Scheme *In Progress*
Antec TPQ-1000
i7 950
OCZ Reaper 3x2gb 1066 7-8-8
Crucial C300 128gb
HD5850
Asus Xonar Essence STX
Yes, with Phase you need to apply grease to the pins, in the socket and on the proc of the CPU.
Loc.o, the thread poster of the eraser idea above even stated you should use some.
If it were me:Originally Posted by loc.o
Very nice
Back plate -> Neoprene -> Motherboard -> Tape -> Dielectric grease (CPU) -> Eraser -> Regular neoprene
Make sure when using eraser that you build layers upon layers. I'd build the eraser level up to the cpu heat spreader's height. Tape off the mosfets and such, then build the eraser right up to them. That way you won't have eraser sticking to those components directly (Helps for easy removal).
Last edited by Sgrios; 11-17-2008 at 07:10 PM. Reason: Above, not below
awesome, thanks a bunch man
CM Stacker 830 Classified Scheme *In Progress*
Antec TPQ-1000
i7 950
OCZ Reaper 3x2gb 1066 7-8-8
Crucial C300 128gb
HD5850
Asus Xonar Essence STX
If you'd like some pictures let me know, there are some good ones in that thread. Can't wait to see some temp. pictures Vab.
Posting Permissions
Reply With Quote
Bookmarks