MMM
Results 1 to 1 of 1

Thread: DFI x48 T3R + Kingmax 1600mhz= bad combo?

  1. #1
    Registered User
    Join Date
    Feb 2007
    Location
    Sweden/Gotland
    Posts
    18

    DFI x48 T3R + Kingmax 1600mhz= bad combo?

    I got a Dfi x48 T3R and ddr3 2x1gb kingmax 1600mhz 7-7-7-20 mem. And i have spent over 15 hours just trying to get it to be stable at spec speed. But i cant get it to work. So now i turn to you experts out there that have the same memory sticks and a x48 board. I kindly ask you guys for help. I should relly need some help with the settings in bios for the memory.

    I have managed to get it stable in super pi 1mb in 700mhz 8-8-8-24 (ddr1400) but thats all...

    (sry for my bad english...)

    This is how it`s set now:

    DRAM Timing Page
    Enhance Data Transmitting.................Normal
    Enhance Addressing........................Normal
    T2 Dispatch...............................Disabled
    Clock Setting Fine Delay..................Listed Below
    CAS Latency Time (tCL)....................8
    RAS# to CAS# Delay (tRCD).................8
    RAS# Precharge (tRP)......................8
    Precharge Delay (tRAS)....................Auto
    All Precharge to Act......................7
    REF to ACT Delay (tRFC)...................60
    Performance Level.........................9
    Read Delay Phase Adjust...................Listed Below
    MCH ODT Latency...........................Auto
    Write to PRE Delay (tWR)..................18
    Rank Write to Read (tWTR).................13
    ACT to ACT Delay (tRRD)...................4
    Read to Write Delay (tRDWR)...............8
    Ranks Write to Write (tWRWR)..............Auto
    Ranks Read to Read (tRDRD)................Auto
    Ranks Write to Read (tWRRD)...............Auto
    Read CAS# Precharge (tRTP)................5
    ALL PRE to Refresh........................7

    Read Delay Phase Adjust Page
    Channel 1 Phase 0 Pull-In.................Auto
    Channel 1 Phase 1 Pull-In.................Auto
    Channel 1 Phase 2 Pull-In.................Auto
    Channel 1 Phase 3 Pull-In.................Auto
    Channel 1 Phase 4 Pull-In.................Auto

    Channel 2 Phase 0 Pull-In.................Auto
    Channel 2 Phase 1 Pull-In.................Auto
    Channel 2 Phase 2 Pull-In.................Auto
    Channel 2 Phase 3 Pull-In.................Auto
    Channel 2 Phase 4 Pull-In.................Auto

    Clock Setting Fine Delay Page
    DRAM CLK Driving Strength.................Level 6
    DRAM Data Driving Strength................Level 8
    Channel 1 Default Skew Model..............Model 3
    Channel 2 Default Skew Model..............Model 3

    Fine Delay Step Degree....................5ps


    Ch1 Clock Crossing Setting................Auto
    DIMM 1 Clock fine delay...................Current 469ps
    DIMM 2 Clock fine delay...................Current 469ps
    DIMM 1 Control fine delay.................Current 427ps
    DIMM 2 Control fine delay.................Current 385ps
    Ch 1 Command fine delay...................Current 413ps

    Ch2 Clock Crossing Setting................Auto
    DIMM 3 Clock fine delay...................Current 602ps
    DIMM 4 Clock fine delay...................Current 602ps
    DIMM 3 Control fine delay.................Current 539ps
    DIMM 4 Control fine delay.................Current 455ps
    Ch 2 Command fine delay...................Current 392ps

    Ch1Ch2 CommonClock Setting................Auto

    Ch1 RDCAS GNT-Chip Delay..................Auto
    Ch1 WRCAS GNT-Chip Delay..................Auto
    Ch1 Command to CS Delay...................Auto

    Ch2 RDCAS GNT-Chip Delay..................Auto
    Ch2 WRCAS GNT-Chip Delay..................Auto
    Ch2 Command to CS Delay...................Auto

    Common CMD to CS Timing...................AUTO


    It`s sp unstable that it freezes in the bios...
    Last edited by TheMan89; 11-14-2008 at 02:25 PM.
    Game:Evga Sli LE, Xeon 3540, Kingston 3x2gb 2000mhz cl8, XFX GTX295, Silverstone Strider 1500w, Intel X25-M 80gb, @ Custom H2O
    Htpc: Asus P7P55D-Evo, Core i5 760, 8gb Kingston Hyper-X cl9, Asus GTX465, Silverstone Strider 850w, Ocz Vertex 3x30gb + 4,5TB

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •