E8400 (New Batch) 5.1G Enter Window at Low Volt 1.39V

[bonzo_catalin]

My q827 , and that it is not max frecq i get , i do it only for fun .

And Spi1mb 5445mhz on SS .

http://www.hwbot.org/user.do?userId=5373

[C-N]

Sweet CPU erickwok look after it

[erickwok]

that's because they're jealous their chips can't come near those numbers

good job on single core, but can you try testing it with lowest stable vcore for 5ghz using both cores?

WFD

Vcore + 0.05V
i.e. 1.39V 5G Dual Core SPI 1M
& 1.44V 5.1G Dual Core SPI 1M

[junkmonk]

i want one!!!!

so B's not coming to north america = assumption or truth?

and how can you tell from which week it is from the batch number?

[erickwok]

590x8.5=5G enter window no problem

[erickwok]

Air Cooling 5.18G 9.013s

next target ----> see 8s

[BiTsCrEaM]

And this is on a TP I45, right? I need one of these chips!

[erickwok]

And this is on a TP I45, right? I need one of these chips!

!!Bingo!!

[an0nym0us]

wow that's a very nice cpu.

[erickwok]

wow that's a very nice cpu.

Work it harder, Make it better, Do it faster, Makes me STRONGER

[Zeus]

Erik, wanna trade yours for a 8600?

[CryptiK]

Wow really impressive cpu you got there.

[WhiteFireDragon]

Erik, wanna trade yours for a 8600?

he also has an e8600. i asked already asked

[[XC] Oj101]

That thing's on drugs Almost 5.2GHz on air!

[OC4/3]

Try strap tweak,should shave .0xx's off your SPI
BTW,you can get a 1M board to test if possible,this clock should be 8's something with the right board
DFI LP DK P45 T2RS+ is good for 1M,so does Abit IP35 Pro
Anyway,dammmm nice chip there
Too bad 9x multi

[Zeus]

Try strap tweak,should shave .0xx's off your SPI
BTW,you can get a 1M board to test if possible,this clock should be 8's something with the right board
DFI LP DK P45 T2RS+ is good for 1M,so does Abit IP35 Pro
Anyway,dammmm nice chip there
Too bad 9x multi

I wouldn't mind the 9x multi if it clocks like that, any decent board nowadays can do 600+FSB.

The DFI T2RS is a very good board for 1M indeed, with a non 45nm supporting bios that is.

[HDCHOPPER]

erickwok your "B" is golden ....buy more of em

[Unseen]

I have here 3x q830A E0. Can you tell me what type of aircooling you are using? i tested only one for a couple of minutes and i can do 9x500@1,23-24v for bench.

Still on the crap box cooling.

[erickwok]

I have here 3x q830A E0. Can you tell me what type of aircooling you are using? i tested only one for a couple of minutes and i can do 9x500@1,23-24v for bench.

Still on the crap box cooling.

this one

http://www.thermalright.com/new_a_pa...50aHVzaWFzdA==

[erickwok]

never never over 1.45V for SP2004
too hot for 4.7G

[HDCHOPPER]

Air Cooling 5.18G 9.013s

next target ----> see 8s

should be eazy to do sub 9's for you

my ole co8400 did 9.838~9.746 iirc at 4.7
no tweeking just nice small drive 7200rpm 20gig & clean install

[erickwok]

should be eazy to do sub 9's for you

my ole co8400 did 9.838~9.746 iirc at 4.7
no tweeking just nice small drive 7200rpm 20gig & clean install

thank you for your advice HDCHOPPER

[bigwill68]

E8400 Q827A and Q826A also have good chips
as I saw some test results in taiwan before

Hey erickwok good job on the Oc brother..I just pickup a E8400 EO Q832A
for $149.99 in the states.My question now is which numbers matter the most
the first 3 or the last 3 on the cpu to tell if you got a good chip to Oc with
Also see you got the BioStar TPower45 chip.. that I got on backorder at my
local Micro Center store here in the states good match..Ic they got the (B)
over there who got the (C) now..I gotta find the Memory your running
again great job and the best of luck on your Rig

[makaka]

Nice result men , But what the hell of noise this fan make , This look like a factory and no room (due to the noise)

[George_o/c]

erickwok, man with your cpu @ 5183, a DFi with pre-45nm bios and some nice 1M tweaking, one could pull off like 8.74x seconds
Sick cpu ! , do you want to trade with my E4300 ? 3800MHz stable on air, 3950MHz max on air, 4464MHz max SPi 1M on dry ice ...