Intel i7 3770K (4.8Ghz@1.36v) ~ Asus Maximus V Gene ~ 8Gb G.Skill Ripjaws X 2133 C9 (@2400 C10) ~ Asus GTX 670 DCUII (1230/7000) ~ Samsung 840 Pro 128Gb ~ WD Black 1Tb ~ Corsair AX 850W ~ X-Fi Titanium Fatal1ty ~ Epoz Aktimate Mini ~ Ducky Shine Blue Led /w MX Red ~ Logitech G700 ~ Samsung S27A850D 27" (2440x1600) ~ SilverStone TJ07B-W
WaterCooled by XSPC Raystorm ~ TC PA 120.3 + 3xAP 15 ~ MCP655 with EK-D5 X-Top Rev.2 ~ EK Multi 250
Powered by APC Smart-UPS SC 1500 ~ MGE ellipse premium 500
Vid is meaningless. Some of the best clocking chips I've had were with a high vid. From an E6700 that ran 10x400 daily with a 1.325 vid, to this i7 with a 1.2875 vid. It does 4ghz with less than 1.25v and I have benched it at 4.6 with less than 1.4v. All on air cooling.
Main Rig
i7 2600k l Asus P8P67 l 2x2gb Gskill l GTS450 l Venomous X l XClio 680
Nice, good to know. I was kind of disappointed tbh when i saw the vid. I will report back when i have some results.
Intel i7 3770K (4.8Ghz@1.36v) ~ Asus Maximus V Gene ~ 8Gb G.Skill Ripjaws X 2133 C9 (@2400 C10) ~ Asus GTX 670 DCUII (1230/7000) ~ Samsung 840 Pro 128Gb ~ WD Black 1Tb ~ Corsair AX 850W ~ X-Fi Titanium Fatal1ty ~ Epoz Aktimate Mini ~ Ducky Shine Blue Led /w MX Red ~ Logitech G700 ~ Samsung S27A850D 27" (2440x1600) ~ SilverStone TJ07B-W
WaterCooled by XSPC Raystorm ~ TC PA 120.3 + 3xAP 15 ~ MCP655 with EK-D5 X-Top Rev.2 ~ EK Multi 250
Powered by APC Smart-UPS SC 1500 ~ MGE ellipse premium 500
An early screenshot: P6T Deluxe V2 (B3 chipset) with the original 610 bios. HT Off.
(With the no-throttling 0006 bios and the same settings it's fully stable. This CPU is able to validate 4.7GHz with less than 1.5v)
Last edited by LostHawk; 12-12-2009 at 01:52 AM.
Asus P8Z77-V Deluxe / i7 3770k @4.5GHz / 8GB Samsung Green Series 30nm @2133MHz / Phanteks PH-TC14PE / Asus GTX Titan @1.1GHz / Corsair AX1200 / Audio-gd 11.32 Dac-Amp & Audeze LCD-2
Room temperature 20℃ case CM690
http://www.youtube.com/watch?v=8p-QegzZTCA
I don't mean to disrespect anyone, but have you read RealTemp thread? There is NO VID DATA stored in Core i7 CPU's.
There is only VID voltage range of 0.800V-1.375V specified by Intel and Max safe voltage of 1.55V for vCore.
AFAIK all MB should set 1.15V for i7 without turbo and 1.25V with turbo enabled.
Maximus 5 Gene | i7-3770K @ 5GHz | ADATA 2x2GB @ 2.6GHz 9-12-10-28-1T | HD7970 @ 1200/6400
Rampage 4 Extreme | i7-3930K @ 5GHz ||| X58-A OC Orange | i7-980X @ 4.6GHz
I know that, I was just stating what is shown when you load defaults in bios since that is what most people refer to as vid with the i7's. I've had at least a dozen i7's and they all load a different voltage at default. I've never seen a default voltage lower than 1.225. With all auto settings, I've seen speed step set all the way down to 1.125 in windows.
Main Rig
i7 2600k l Asus P8P67 l 2x2gb Gskill l GTS450 l Venomous X l XClio 680
Ok testing at the moment. Cant go very high due to stock crappy HS. 21x175 HT On, 1.258 idle, 1.211 load, 87C max under Linx, everything stock.
Intel i7 3770K (4.8Ghz@1.36v) ~ Asus Maximus V Gene ~ 8Gb G.Skill Ripjaws X 2133 C9 (@2400 C10) ~ Asus GTX 670 DCUII (1230/7000) ~ Samsung 840 Pro 128Gb ~ WD Black 1Tb ~ Corsair AX 850W ~ X-Fi Titanium Fatal1ty ~ Epoz Aktimate Mini ~ Ducky Shine Blue Led /w MX Red ~ Logitech G700 ~ Samsung S27A850D 27" (2440x1600) ~ SilverStone TJ07B-W
WaterCooled by XSPC Raystorm ~ TC PA 120.3 + 3xAP 15 ~ MCP655 with EK-D5 X-Top Rev.2 ~ EK Multi 250
Powered by APC Smart-UPS SC 1500 ~ MGE ellipse premium 500
Little Bench Session.
Best Wprime of the night
Best Super pi
Both are personal bests for me.
I was able to get the RAM to run with a divider of 8, but failed after a pass or two of super pi. I'll work on that next as well.
My highest validation as well
http://valid.canardpc.com/show_oc.php?id=878245
Have you also gave farewell to your TRUE old friend, I see mega improvements in benching as well the megashadow if you know what I mean
Core i7 4500MHz @ 1.33v
Core i7 4200MHz @ 1.19v
CPU cooling Prolimatech Megahalmes
Motherboard P6T Deluxe OC/Palm
Memory 6GB Corsair DDR3 Memory
Graphics Card GTX 295
Hard Drives 500GB Barracuda 7200RPM
256GB SSD Read/Write 500/300 MB/s
Power Supply Corsair TX 650W
OS Win 7 Ultimate 64 Bit Retail
Monitor 24" Dell 1680 x 1050
oh i c... lol
Core i7 4500MHz @ 1.33v
Core i7 4200MHz @ 1.19v
CPU cooling Prolimatech Megahalmes
Motherboard P6T Deluxe OC/Palm
Memory 6GB Corsair DDR3 Memory
Graphics Card GTX 295
Hard Drives 500GB Barracuda 7200RPM
256GB SSD Read/Write 500/300 MB/s
Power Supply Corsair TX 650W
OS Win 7 Ultimate 64 Bit Retail
Monitor 24" Dell 1680 x 1050
lol. The mega is great though, does a heck of a job at high clocks.
Earlier today i was doing a little testing on the new cpu. Since i am at stock cooling atm i decided to find the max i can push for 2-3 linx passes with full memory and ht on with stock everything. Max i could go was 21x185 which crashed after 1+ min with temps at 86-88C. I know i shouldnt go that high but i wanted to check the overclockability. Was the crash due to the very high temp or due to low voltage?
Intel i7 3770K (4.8Ghz@1.36v) ~ Asus Maximus V Gene ~ 8Gb G.Skill Ripjaws X 2133 C9 (@2400 C10) ~ Asus GTX 670 DCUII (1230/7000) ~ Samsung 840 Pro 128Gb ~ WD Black 1Tb ~ Corsair AX 850W ~ X-Fi Titanium Fatal1ty ~ Epoz Aktimate Mini ~ Ducky Shine Blue Led /w MX Red ~ Logitech G700 ~ Samsung S27A850D 27" (2440x1600) ~ SilverStone TJ07B-W
WaterCooled by XSPC Raystorm ~ TC PA 120.3 + 3xAP 15 ~ MCP655 with EK-D5 X-Top Rev.2 ~ EK Multi 250
Powered by APC Smart-UPS SC 1500 ~ MGE ellipse premium 500
Told ya mega is good doesnt matter if its shadow or helms after that only difference is apart from the color one is in states another is in kingdom lol
My best benching would be this......so far....... not too shabby
Core i7 4500MHz @ 1.33v
Core i7 4200MHz @ 1.19v
CPU cooling Prolimatech Megahalmes
Motherboard P6T Deluxe OC/Palm
Memory 6GB Corsair DDR3 Memory
Graphics Card GTX 295
Hard Drives 500GB Barracuda 7200RPM
256GB SSD Read/Write 500/300 MB/s
Power Supply Corsair TX 650W
OS Win 7 Ultimate 64 Bit Retail
Monitor 24" Dell 1680 x 1050
And this one as well with my new foun xeon W3520 .......
When ever the temp starts to get towards 90c I increase the fan rotation from low to max, gives a good 8c to 10c drop in temp. as you can see in my 4200mhz benching
Last edited by imo; 12-12-2009 at 02:37 PM.
Core i7 4500MHz @ 1.33v
Core i7 4200MHz @ 1.19v
CPU cooling Prolimatech Megahalmes
Motherboard P6T Deluxe OC/Palm
Memory 6GB Corsair DDR3 Memory
Graphics Card GTX 295
Hard Drives 500GB Barracuda 7200RPM
256GB SSD Read/Write 500/300 MB/s
Power Supply Corsair TX 650W
OS Win 7 Ultimate 64 Bit Retail
Monitor 24" Dell 1680 x 1050
Hello mate, in my opinion it could be both, but I suspect its volt since core i7 thermal temp protection kicks in around 99C (or 100 cis it?) but agian its just my personal assumption, all you need to to do is apply one noth more volt see what happens...you will get the answer.
Core i7 4500MHz @ 1.33v
Core i7 4200MHz @ 1.19v
CPU cooling Prolimatech Megahalmes
Motherboard P6T Deluxe OC/Palm
Memory 6GB Corsair DDR3 Memory
Graphics Card GTX 295
Hard Drives 500GB Barracuda 7200RPM
256GB SSD Read/Write 500/300 MB/s
Power Supply Corsair TX 650W
OS Win 7 Ultimate 64 Bit Retail
Monitor 24" Dell 1680 x 1050
very good IMO, I was just about to start wondering why they were so high in the first pic
Thanks CHICKEN patty but im still crunching on those...
At the moment got Scythe DFS123812L-2000 (2000rpm version) since I prefer a balance match silence + performence, these 38mm create good presure as well, but sometime during benching 3000rpm yeilds much better, though mega recommends 1200-1600RPM
Core i7 4500MHz @ 1.33v
Core i7 4200MHz @ 1.19v
CPU cooling Prolimatech Megahalmes
Motherboard P6T Deluxe OC/Palm
Memory 6GB Corsair DDR3 Memory
Graphics Card GTX 295
Hard Drives 500GB Barracuda 7200RPM
256GB SSD Read/Write 500/300 MB/s
Power Supply Corsair TX 650W
OS Win 7 Ultimate 64 Bit Retail
Monitor 24" Dell 1680 x 1050
Tell me patty whats the max BCLK limit of your Board ? Was wondering apart from the classified which mobo would you recommend on avarage for high BCLK?
Im stuck with p6T Deluxe 225BCLK limit, and I dont want 225+ with insane PCIE volt, so might switch to another mobo
Last edited by imo; 12-13-2009 at 05:39 AM.
Core i7 4500MHz @ 1.33v
Core i7 4200MHz @ 1.19v
CPU cooling Prolimatech Megahalmes
Motherboard P6T Deluxe OC/Palm
Memory 6GB Corsair DDR3 Memory
Graphics Card GTX 295
Hard Drives 500GB Barracuda 7200RPM
256GB SSD Read/Write 500/300 MB/s
Power Supply Corsair TX 650W
OS Win 7 Ultimate 64 Bit Retail
Monitor 24" Dell 1680 x 1050
IMO, I have never tried to find max BCLK for my board. however, I seem to be able to get the same clocks as everyone else using air cooling when benching. With a 21 multi the max I hit I think was 226 BCLK.
After getting 5.2 validated on water with 0C outside temps, than another hour trying to increase bclk....turns out cpuz 1.53 is out....thankssssss
Now warmed up to 7C, so best could do is 5.13. I need to get ln2, but have to get another mobo, ie classified, to make ln2 worthwhile, pretty sure I can max bclk on Gb board with just outside temps. But too happy with 24/7 never an issue GB board. Need to get separate bench comp I guess.
http://valid.canardpc.com/show_oc.php?id=903950
You'd better use watercooling at least, realtemp will give you a good idea about the thermal status of your cpu while overclocking.
If you want to know how others did with D0s then check this thread:
http://www.xtremesystems.org/forums/...d.php?t=225429
Intel Core i7 980X @ 4.53 GHz 6C-12T / Gigabyte GA-EX58-UD4P / CORSAIR CMG6GX3M3A1866C7 / Ati Radeon Sapphire 5870 1GB DDR5 / CORSAIR CMFSSD-128GBG2D / LG CH08LS10 / Creative X-FI Titanium Fatality /Corsair CMPSU-850HXEU PSU (850W) / Silverstone Temjin SST-TJ07B Case / SAMSUNG SYNCMASTER P2350
Watercool HK CPU LGA1366 Rev. 3.0 LT / DD-CPX-Pro 12V Pump / Swiftech MCR320 360mm / EK-Multioption RES 250 Rev.2 - EK-ANTI-Cyclone / Scythe S-FLEX Fan SFF21G.
ENZOTECH SCW1 vs APOGEE GT
Update Xeon W3520 4.6GHz @ 1.36v (HTOff) On Air
Last edited by imo; 12-28-2009 at 03:55 PM.
Core i7 4500MHz @ 1.33v
Core i7 4200MHz @ 1.19v
CPU cooling Prolimatech Megahalmes
Motherboard P6T Deluxe OC/Palm
Memory 6GB Corsair DDR3 Memory
Graphics Card GTX 295
Hard Drives 500GB Barracuda 7200RPM
256GB SSD Read/Write 500/300 MB/s
Power Supply Corsair TX 650W
OS Win 7 Ultimate 64 Bit Retail
Monitor 24" Dell 1680 x 1050
Bookmarks