Does the Creative Sound Blaster X-Fi Titanium fit in the top PCI sli slot while still using the stock northbridge heatsink?
Does the Creative Sound Blaster X-Fi Titanium fit in the top PCI sli slot while still using the stock northbridge heatsink?
No, its doesn't You either have to cut some of the fins off the original heatsink. It is easily replaceable many old heatsinks that were compatible with nforce 2 motherboards or the Thermalright hr-05 sli which I modded to fit.....
(New build):MSI Big Bang X-power II with XSPC MB blocks, Core I7 3930k@4.6Ghz with HT on, 3x GTX 480 SLI with EK Waterblocks(for now), X-fi Titanium, Gskill quad kit 16GB 2133mhz, 2x240GB Corsair GT SSD's(raid 0), 3xWD 2TB drives, Silverstone Strider ST1500 Watt, Dell3007WFP and 2x Samsung 305T's. Water loop: EK HF CPU block, XSPC RX480 Rad, Coolgate GC480, Airplex Revolution 420 Rad, 2x DDC 3.25 18W with EK dual top, Caselabs STH10 white with customizations....
I'm getting the same sound card but with two 4870x2 watercooled, do you think you can recommend me a NB cooler please?Originally Posted by BringerOdeath
Anyone tried tri-sli with an X-Fi Titanium in the upper pci-ex1 slot ?
No SCP (crackling /popping) in games ?
QX9650 @ 4450 mhz
Asus Striker II Extreme 790i
4 GB Corsair Dominator 1800 @ 1870 8-8-8-20 1T 1.8v
3 x Asus GTX280 TRI-SLI 810/1647/1296
Asus Xonar DX
Thermaltake Toughpower 1500 W
Dell 30" 3007WFP
Logitech G7, G15, G25
Watercooling Hailea 1500 chiller, EK, Swiftech, D-Tek
Dual Prometeia site
I modded my NB to fit the x-fi titanium in the top slot of my Rampage II and It sounds perfect. I had non stop crackling and snapping on my old 790i board. No such problems on any of the X58 boards as far as I have heard!! Now, my question! I accidently pulled out all of the wire of my lcd poster from the little socket that plugs into the motherboard. Can anyone show me a picture of the wires of what order thay are in??
(New build):MSI Big Bang X-power II with XSPC MB blocks, Core I7 3930k@4.6Ghz with HT on, 3x GTX 480 SLI with EK Waterblocks(for now), X-fi Titanium, Gskill quad kit 16GB 2133mhz, 2x240GB Corsair GT SSD's(raid 0), 3xWD 2TB drives, Silverstone Strider ST1500 Watt, Dell3007WFP and 2x Samsung 305T's. Water loop: EK HF CPU block, XSPC RX480 Rad, Coolgate GC480, Airplex Revolution 420 Rad, 2x DDC 3.25 18W with EK dual top, Caselabs STH10 white with customizations....
There u go...
Lian Li PC-A77B, Core i7 6 Core980x @ 4.2MHz (1.4v), Asus MB-R3E, 12GB Corsair Dominator 2000MHz DDR3, Enermax Revolution85+ 1250W, Sapphire 5970 Crossfire, Asus Xonar Essence STX, WD Scorpio Black 320GB, Crucial C300 SSDx2, Laing DDC 3.25 -12V 18 Watt Version x2, Heatkiller DUAL DDC-Case LT Arcyl, Bitspower BP-WBVGA5970AC-BK GPU Block Black w/ Acrylic Topx2, EK EK-FB RE3 - Acetal+Nickel, Bitspower Water Tank Z-Multi 150, PrimoFlex Pro LRT 7/16" ID (5/8" OD) Black Tubing[/B], Feser X-Changer 360mm Xtreme Performance Radiator, Black IceŽ GT Stealth 240 XFlow Highest Performance Radiator, Enermax "Magma"-Twister Bearing SilentExtreme Operationl 120mm Fansx5, Cooler master Excalibur R4-EXBB-20PK-R0 Fansx2, Cool Master SickleFlow 120 Red LED Fansx7, Kooolance Quick Disconnects, Bitspower Black Matte High Fittings, Dell 3008WFP Ultrasharp 30" Monitor, Logitech Illuminated Keyboard, Razer Mamba Mouse, Windows 7 Ultimate 64 Bit
Thx Bladechai!!
(New build):MSI Big Bang X-power II with XSPC MB blocks, Core I7 3930k@4.6Ghz with HT on, 3x GTX 480 SLI with EK Waterblocks(for now), X-fi Titanium, Gskill quad kit 16GB 2133mhz, 2x240GB Corsair GT SSD's(raid 0), 3xWD 2TB drives, Silverstone Strider ST1500 Watt, Dell3007WFP and 2x Samsung 305T's. Water loop: EK HF CPU block, XSPC RX480 Rad, Coolgate GC480, Airplex Revolution 420 Rad, 2x DDC 3.25 18W with EK dual top, Caselabs STH10 white with customizations....
Mine works like a charm, i'm impressed. Even if it doesn't reach the heights of a real X-Fi like the one i had, it's real good and after 3 or 4 days i don't even remember i had it
ASUS Sabertooth P67B3ˇ nVidia GTX580 1536MB PhysX ˇ Intel Core i7 2600K 4.5GHz ˇ Corsair TX850W ˇ Creative X-Fi Titanium Fatal1ty
8GB GSKill Sniper PC3-16000 7-8-7 ˇ OCZ Agility3 SSD 240GB + Intel 320 SSD 160GB + Samsung F3 2TB + WD 640AAKS 640GB ˇ Corsair 650D ˇ DELL U2711 27"
The only complaint I have about this board is that the pcie slots are way too close with any double slot air cooler on a vid card.
My top card gets too damned hot. IMO they could have just lost the last pcie slot/and or the pci slot in between and spaced the two that MATTER further apart.
As a pro, this is the most stable board I have ever worked with. I have never been able to go right in, jack the bclock up to 200 and run at 4ghz without something crying on me. I know the board has a lot that most won't use, but i find everything about it being worth the proce I paid even a month after first getting it. Love it, and I recommend it to anyone who is hardcore...but I have to recommend watercooling with crossfire or SLI for the reasons I mentioned.
I agree to that one seems the rampage boards have always been stable from the get go unless you get DOA.
I have a chance to pick this one up used and am wondering if, 5 months later almost, people would still recommend this?
Is anything still broken with it? Is LLC fixed and working properly?
Computer: i7 2600k @ 4.7Ghz | Asus P8P67 Evo | Corsair LP 16gb 1600CL9 | Silver Arrow | Essence STX | Crucial m4 128gb | Silverstone Raven 3|
Video: 2x Sapphire 6950 Toxic 2gb @ 6970 Switch @ 880 / 1350 | Asus VG248QE |
Audio: ODAC+O2 => JH|13 Pro | STX => ATH-AD700X / Audioengine A5
Absolutely. Im running dead stable since march when the bios matured. Extremely stable en fast board. Running 4.2 ghz with a i7 920 C0 stepping on all 4 cores. But Lynnfield has been launched today. So an Core i7 870 and a P55 board is also a good choice...............
Asus Maximus 3 Extreme | Core i7 860 | Thermalright Venemous X | Corsair Dominator GT 2000-C8 4gb Kit | 2 WD Black FALS 1 TB Raid0 | XFX HD5870 | Coolermaster ATCS 840 | Corsair HX750 Watt | Samsung 2493 HM TFT |
I got myself this RIIE and this is what I found after removing the cooling block.
I guess am glad I going watercooling and saw that before trying it
Hi, could you re-post picture from your northbridge mod with HR-05 SLI. Your last link expired. Thanks!
Sup dudes, due to problems w PSU i the content of integrated Marvel LAN EEPROM damaged on my mobo. So now i have 00:00:00:00:00 mac address on both of Lan ports in Win8 and wrong controlled id: Marvell 88E8055 instead of Marvell 88E8056.
Seems i found the solution how to fix in on Russian forums, but i need the original EEPROM file (not damaged) from both ports to reflash my board w key for device ID and my mac address. Can anyone help me w it, and send it?
There is main steps to save EEPROM:
Download marvell program:
http://depositfiles.com/files/8w1i4wpxz
Or from official marvell site (seems its the same programm):
http://www.marvell.com/support/downloads/search.do
DOS Diagnostic Utility for Yukon Devices
2. Disable in Bios 2nd Lan
WARNING! DO NOT RUN eep.bat FROM DOS it could lead to problems w LAN
3. Boot to DOS (from bootable DOS drive) and do: yukonvpd -R save.raw
4. Send me save.raw file
5. Do this for 2nd port (im not sure that its needed cause maybe they are powered w same chip so i just need to flash two different macs, but plz do it, so i don't have to bother u once more)
Russian ASUS support not sending me the EEPROM files and service center too (warranty already ended), so i will be very greatfull for your help.
Last edited by Glavir; 03-15-2013 at 02:16 PM.
[FONT="Arial"][SIZE="1"]
1: CM Stacker 832 || Core 2 Quad Q6600 ||ThermalRight SI-128 || 2 x Corsair Dominator TWIN2X2048-9136C5D || XFX 780i Tri-Way SLI || 2* 8800GTX + 1 8800 Ultra || SP Kingcraft 1000w || 4 x WD Raptor 150 GB Raid 0 || 250GB WD SATA2 cache 8mb || TFT 17’ Sony SDM-HS75D
[SIGPIC][/SIGPIC]
Already got the files, no need anymore.
[FONT="Arial"][SIZE="1"]
1: CM Stacker 832 || Core 2 Quad Q6600 ||ThermalRight SI-128 || 2 x Corsair Dominator TWIN2X2048-9136C5D || XFX 780i Tri-Way SLI || 2* 8800GTX + 1 8800 Ultra || SP Kingcraft 1000w || 4 x WD Raptor 150 GB Raid 0 || 250GB WD SATA2 cache 8mb || TFT 17’ Sony SDM-HS75D
[SIGPIC][/SIGPIC]
My Rampage 2 extreme board shorted out and died. Does anybody have one for sale on here that i could buy until Haswell-E comes out?
Case:Antec 1200
PSU:Corsair AX 1200w
Motherboard:Rampage Extreme 2 x58 on Water
CPU:I7 930 @4.4ghz HT on (1.43) 24/7 on Water
Radiator:Swiftech Mcr 320 QP Triple(using Radbox)
Block:Swiftech Apogee XT/ EK-FB RE2 ver.2 Acetal+Nickel/EK-Mosfet Copper Plexi
Reservoir:Swiftech Micro Res v2
Tubing:Primochill Blue
Water: Deionzed with PT Nuke
Memory:6GB Corsair xms 1600mhz(1675) 9-9-9-24-2N
Hardrive:300Gb Raptor-500GB Wd-1TB Wd
Sound:Asus Xonar Xense
Headset:Sennheiser 350
GPU:Gigabyte GTX 690
GPU Driver:313.95
3D Vantage:51283
OS:Windows 7 Ultimate
Mouse:Logitech G500
Keyboard:Logitech G11
Mouse mat:Razer Destructor
Monitorell U2410 rev5 24inch 16:10
Fully Stable: Linx Occt IBT Prime 95
It works flawlessly for 7 years
Posting Permissions
Reply With Quote
Bookmarks