Core i7 860 4200Mhz > Asus Maximus III Formula > Corsair Dominator GT 2x2GB 2000 8-9-8-24 > 2x60GB Corsair Force F60 Raid-0 SSD > Samsung Spinpoint 1TB F3 > HIS HD5970 2GB DDR5 > Silverstone TJ-07 > Corsair HX620 PSU > Dell S2409W > Windows 7 Ultimate x64 > EK Supreme HF > Danger Den 5970 Full Copper > EK FB Maximus III Formula > EK RAM Dominator GT > Laing DDC 3.2 + EK X-Top V2 > TFC XChanger 480 > EK Multioptions X2 Advance 250 > Tygon R3603 Tubing > Bitspower Fittings > Lamptron FC Touch
____________________________
Q9550 L845B822 @ 4.2 GHZ l EP45-UD3R REV 1.1 F12 BIOS l Crucial Ballistix 4GB 2x2GB(5-5-5-14) @2.0 V l GIGABYTE GTX 460 1024 MB
LIAN LI PC-8NWB l CPU COOLER TR 120 Extreme l ENERMAX 460 WATT
____________________________i7 2500K @ 4.80 GHZ l P67A UD3P F6A BIOS l G.Skill Ripjaw 4GB 2x2GB @1600 MHZ(9-9-9-24) @1.56 V l EVGA GTS 420
LIAN LI PC-7FW l TuniQ 120 Extreme l TR 600 W
____________________________
Core i7 860 4200Mhz > Asus Maximus III Formula > Corsair Dominator GT 2x2GB 2000 8-9-8-24 > 2x60GB Corsair Force F60 Raid-0 SSD > Samsung Spinpoint 1TB F3 > HIS HD5970 2GB DDR5 > Silverstone TJ-07 > Corsair HX620 PSU > Dell S2409W > Windows 7 Ultimate x64 > EK Supreme HF > Danger Den 5970 Full Copper > EK FB Maximus III Formula > EK RAM Dominator GT > Laing DDC 3.2 + EK X-Top V2 > TFC XChanger 480 > EK Multioptions X2 Advance 250 > Tygon R3603 Tubing > Bitspower Fittings > Lamptron FC Touch
I have been tweaking for about 7 days now. It has been a to get Prime/Orthos stable at higher FSB with acceptable (for me) voltages but I finally accomplished it. I was able to do 20 runs of linpack, 2 hours of OCCT, super-pi runs and prime small ffts for an 18 hour run before I manually halted. Blend is what I had a problem with. I tried almost every combo I could.
Maybe this will help somebody else. When I lowered my MCH reference to .70 I finally got 24 hours of Orthos blend.
So here is my new 24/7 settings.
2500k @ 4.8 Ghz
Asus Sabertooth P67 (1502)
G.Skill Ripjaws 1600 DDR3 8GB
OCZ ZX Series OCZ-ZX1250W PS
PowerColor 4870x2
Crucial C300 SSD 128GB
150GB Western Digital Raptor
Westinghouse LVM-37w3 1080p Monitor
Win 7 Ultimate
Cooling: CPU-H70 with 2 San Ace 120x38mm fans+4Scythe S-FLEX SFF21F 120mm, Sunbeam Fan Control, Silverstone TJ09 case.
Hello zodden,
Can you please share your other BIOS settings? Especially the ones in BOLD below?
DRAM Performance Control
Performance Enhance...................: Standard
Extreme Memory Profile (X.M.P.)………….Disabled
(G)MCH Frequency Latch...............: ???Mhz
System Memory Multiplier ..............: ???
Memory Frequency (Mhz) ..............: ???Mhz
DRAM Timing Selectable ................: Manual
Motherboard Voltage Control
CPU Vcore….……….........................???V
CPU Termination…..... ???V
CPU PLL…………………....???V
CPU Referen.…………....???V
MCH/ICH
MCH Core…………….....???V
MCH Reference….…….???V
MCH/DRAM Ref.…......???V
ICH I/O……………….....???V
DRAM
DRAM Voltage ……....???V
DRAM Termination .…???V
Channel A Reference………..0.750V [Auto]
Channel B Reference………..0.750V [Auto]
Ch.A Address VRef………..0.750V [Auto]
Ch.B Address VRef………..0.750V [Auto]
Sure below are my bios settings. Mem is at 5-5-5-15 2T, PL9, stock sub timings except trfc at 60
DRAM Performance Control
Performance Enhance...................: Turbo
Extreme Memory Profile (X.M.P.)………….Disabled
(G)MCH Frequency Latch...............: Auto
System Memory Multiplier ..............: 2.00D
Memory Frequency (Mhz) ..............: 1050 Mhz
DRAM Timing Selectable ................: Manual
Motherboard Voltage Control
CPU Vcore….……….........................1.3750V
CPU Termination…..... 1.28V
CPU PLL…………………....1.57V
CPU Referen.…………....autoV
MCH/ICH
MCH Core…………….....1.38V
MCH Reference….…….0.750V
MCH/DRAM Ref.…......autoV
ICH I/O……………….....normalV
DRAM
DRAM Voltage ……....2.1V
DRAM Termination .…autoV
Channel A Reference………..0.750V [Auto]
Channel B Reference………..0.750V [Auto]
Ch.A Address VRef………..0.750V [Auto]
Ch.B Address VRef………..0.750V [Auto]
Last edited by zodden; 10-28-2008 at 03:37 PM.
2500k @ 4.8 Ghz
Asus Sabertooth P67 (1502)
G.Skill Ripjaws 1600 DDR3 8GB
OCZ ZX Series OCZ-ZX1250W PS
PowerColor 4870x2
Crucial C300 SSD 128GB
150GB Western Digital Raptor
Westinghouse LVM-37w3 1080p Monitor
Win 7 Ultimate
Cooling: CPU-H70 with 2 San Ace 120x38mm fans+4Scythe S-FLEX SFF21F 120mm, Sunbeam Fan Control, Silverstone TJ09 case.
I've had this board up and running an hour. I previously had 2-Striker 2 Formulas, 1-MSI P7N diamond, 1-EVGA 780 FTW,
2- Maximus 2 formulas and 1- Rampage Extreme.My goal was a Q9650 4500Mhz 500x9 on Air. None of the other boards could do it.
Closest stable was 490x9 with the MIIF. I've only had 1 BSOD with this board and it only took an hour for the beginnings of an oustanding OC session.
This is what i call FUN! I've booted into windows at 533X8 only to get my 1 and only BSOD after 10-15 seconds.
That was with no extra voltage over what i'm running now. I'll be checking for max FSB Next.
Thanks to napalm for some bios settings.
Last edited by nugzo; 10-28-2008 at 05:27 PM.
Gigabyte Z68X UD7
Intel Core i7 2600K (testing)
16GB Mushkin Redline 17000 2133 1.65v
EK, 3x120 Rad 2xMCP655
Acer 1200w PSU
2-128GB Samsung SSD RAID 0
2-1TB Seagete 32mb RAID 0
1-1TB Western Digital
1- Plextor PX-B320SA Blue Ray
1- Plextor PX-880SA 24x DVD/RW
2- EVGA Nvidia GTX-480 SLI
LG 30", Hanns G 28"
thanks zodden for your settings. it really helped lower my volts and up my fsb.
_________________________________________________
............................ImAcOmPuTeRsPoNgE............................
[SIGPIC][/SIGPIC]
MY HEATWARE 76-0-0
nice radaja.,this is my result.,no so impressive.,because cannot get 450fsb..need to pump vcore to 1.45v to get it..so this the last i can manage..
Core i7 860 4200Mhz > Asus Maximus III Formula > Corsair Dominator GT 2x2GB 2000 8-9-8-24 > 2x60GB Corsair Force F60 Raid-0 SSD > Samsung Spinpoint 1TB F3 > HIS HD5970 2GB DDR5 > Silverstone TJ-07 > Corsair HX620 PSU > Dell S2409W > Windows 7 Ultimate x64 > EK Supreme HF > Danger Den 5970 Full Copper > EK FB Maximus III Formula > EK RAM Dominator GT > Laing DDC 3.2 + EK X-Top V2 > TFC XChanger 480 > EK Multioptions X2 Advance 250 > Tygon R3603 Tubing > Bitspower Fittings > Lamptron FC Touch
I have a UD3R, and it seems like for most of the 120mm CPU fans on Newegg there is a review that says it didn't fit on this model because the on-board heatsinks got in the way.
Has anyone been able to put a 120mm non-stock fan on their CPU?
2500k @ 4.8 Ghz
Asus Sabertooth P67 (1502)
G.Skill Ripjaws 1600 DDR3 8GB
OCZ ZX Series OCZ-ZX1250W PS
PowerColor 4870x2
Crucial C300 SSD 128GB
150GB Western Digital Raptor
Westinghouse LVM-37w3 1080p Monitor
Win 7 Ultimate
Cooling: CPU-H70 with 2 San Ace 120x38mm fans+4Scythe S-FLEX SFF21F 120mm, Sunbeam Fan Control, Silverstone TJ09 case.
Glad to you radaja & ezaleina, Thanks zodden for your info, I just notice that CPU VTT is relate to MCH reference (if you set MCH ref. to non auto)
And now I can boot up success to window at VTT 1.28 and MCH ref around 0.64 ( but show in ET6 0.90) .Still not test a stable yet. But this is
first time I can boot up to window with below 1.60 VTT, I'll post the test later.
____________________________
Q9550 L845B822 @ 4.2 GHZ l EP45-UD3R REV 1.1 F12 BIOS l Crucial Ballistix 4GB 2x2GB(5-5-5-14) @2.0 V l GIGABYTE GTX 460 1024 MB
LIAN LI PC-8NWB l CPU COOLER TR 120 Extreme l ENERMAX 460 WATT
____________________________i7 2500K @ 4.80 GHZ l P67A UD3P F6A BIOS l G.Skill Ripjaw 4GB 2x2GB @1600 MHZ(9-9-9-24) @1.56 V l EVGA GTS 420
LIAN LI PC-7FW l TuniQ 120 Extreme l TR 600 W
____________________________
Core i7 860 4200Mhz > Asus Maximus III Formula > Corsair Dominator GT 2x2GB 2000 8-9-8-24 > 2x60GB Corsair Force F60 Raid-0 SSD > Samsung Spinpoint 1TB F3 > HIS HD5970 2GB DDR5 > Silverstone TJ-07 > Corsair HX620 PSU > Dell S2409W > Windows 7 Ultimate x64 > EK Supreme HF > Danger Den 5970 Full Copper > EK FB Maximus III Formula > EK RAM Dominator GT > Laing DDC 3.2 + EK X-Top V2 > TFC XChanger 480 > EK Multioptions X2 Advance 250 > Tygon R3603 Tubing > Bitspower Fittings > Lamptron FC Touch
i set what zodden did with the mch reference voltage to o.750 in bios and in et6 shows 0.700 and i was able to boot with vtt lower than 1.42
_________________________________________________
............................ImAcOmPuTeRsPoNgE............................
[SIGPIC][/SIGPIC]
MY HEATWARE 76-0-0
Man, there are so many threads about this mobo that it's hard to keep up!
Intel i7 920 @ 4Ghz - Asus P6T Deluxe - OCZ Gold 1600 3x2Gb @ 1690 - Sapphire HD 4890 (900/1100) - 2x Velociraptor 300Gb Raid0 - WD Green 1Tb - Seagate 7200.11 1.5Tb - DVD-RW DL (samsung/Pioneer) - Cooler Master 1000W - Cooler Master Stacker 830 SE - Microsoft Ergonomic Keyboard - Logitech MX Revolution - Vista 64 - Hanns-G 28"
http://img261.imageshack.us/my.php?i...apimagebq7.jpg
Can you se it now?
NEED HELP
Last edited by M-XXXX; 10-29-2008 at 06:58 AM.
i7 920, Evga X58 SLI, CF 4870/ 5870, 3x2GB Crucial
Water cooling, Single stage cooling, Bench table
Intel G2 SSD, WD 640Gb, G5, G15, NEC 2470 WVX, 970P...
@zodden,on that 525fsb run you posted you were able to run pl9 with 1/1 ? i thought the lowest pl on the 1/1 divider above 450 fsb was pl10 on the P45 chip. the lowest i could do on my maxII at 467fsb @1/1 was pl10.
_________________________________________________
............................ImAcOmPuTeRsPoNgE............................
[SIGPIC][/SIGPIC]
MY HEATWARE 76-0-0
Hey nugzo, not bad at all, I notice you are using 1.6v on the MCH on the UD3P, just wondering if you tried up to 1.6 vNB on the M2F when trying for max stable FSB? What vNB were you using on the M2F for 490 FSB stable?
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
why gigabyte boards dont support G.skill and Crucial Ballistix DDR2 rams?
I have two set 2x2gb 8500 of g.skill and crucial. .and im planning buy a new board, but gigabyte dont support them ... anyway Asus support all ddr2 brand, maybe my next board will be Asus P5Q series
He Guy I'm try @zodden BIOS setting and set 0.75 Mch Reference is working great!! here is my share BIOS setting
DRAM Performance Control
Performance Enhance...................: Turbo
Extreme Memory Profile (X.M.P.)………….Disabled <----I don't have this in BIOS
(G)MCH Frequency Latch...............: Auto
System Memory Multiplier ..............: 2.00D
Memory Frequency (Mhz) ..............: 1066 Mhz
DRAM Timing Selectable ................: Manual
Mem is at 5-5-5-15 2T and no change in sub timimg
Motherboard Voltage Control
CPU Vcore….……….........................1.43750V
CPU Termination…..... 1.28V
CPU PLL…………………....1.50V
CPU Referen.…………....autoV
MCH/ICH
MCH Core…………….....1.32V
MCH Reference….…….0.750V
MCH/DRAM Ref.…......auto
ICH I/O……………….....auto
DRAM
DRAM Voltage ……....1.8V
DRAM Termination .…autoV
Channel A Reference………..[Auto]
Channel B Reference………..[Auto]
Ch.A Address VRef………..[Auto]
Ch.B Address VRef………..[Auto]
I try to run HyperPI ,Orthos ,Memtest at the same time like crazy to find where unstable may happen!
Notice that when pull up the CPU VTT the MCH REF 'll up also.
I doubt that why AUTO voltage setting for this board seem unstable even @stock speed (E8600 3.33 Mhz)
Anyway I found 1 error memtest in this setting.
____________________________
Q9550 L845B822 @ 4.2 GHZ l EP45-UD3R REV 1.1 F12 BIOS l Crucial Ballistix 4GB 2x2GB(5-5-5-14) @2.0 V l GIGABYTE GTX 460 1024 MB
LIAN LI PC-8NWB l CPU COOLER TR 120 Extreme l ENERMAX 460 WATT
____________________________i7 2500K @ 4.80 GHZ l P67A UD3P F6A BIOS l G.Skill Ripjaw 4GB 2x2GB @1600 MHZ(9-9-9-24) @1.56 V l EVGA GTS 420
LIAN LI PC-7FW l TuniQ 120 Extreme l TR 600 W
____________________________
As far as any hard-wired restrictions- maybe there is but it must not be at 9. Maybe the restriction starts at 8 since I couldn't even post but I don't know. From what I have read here though I think you can take it as low as your system lets you. For me 9 is as low as I was able to go. I didn't mess around with the pull ins and stuff from that bios page because frankly I don't understand it enough to mess with it.
Maybe CryptiK can answer your question as he knows more about this stuff then I do.
2500k @ 4.8 Ghz
Asus Sabertooth P67 (1502)
G.Skill Ripjaws 1600 DDR3 8GB
OCZ ZX Series OCZ-ZX1250W PS
PowerColor 4870x2
Crucial C300 SSD 128GB
150GB Western Digital Raptor
Westinghouse LVM-37w3 1080p Monitor
Win 7 Ultimate
Cooling: CPU-H70 with 2 San Ace 120x38mm fans+4Scythe S-FLEX SFF21F 120mm, Sunbeam Fan Control, Silverstone TJ09 case.
@bugjae, great job that looks awesome!
_________________________________________________
............................ImAcOmPuTeRsPoNgE............................
[SIGPIC][/SIGPIC]
MY HEATWARE 76-0-0
2500k @ 4.8 Ghz
Asus Sabertooth P67 (1502)
G.Skill Ripjaws 1600 DDR3 8GB
OCZ ZX Series OCZ-ZX1250W PS
PowerColor 4870x2
Crucial C300 SSD 128GB
150GB Western Digital Raptor
Westinghouse LVM-37w3 1080p Monitor
Win 7 Ultimate
Cooling: CPU-H70 with 2 San Ace 120x38mm fans+4Scythe S-FLEX SFF21F 120mm, Sunbeam Fan Control, Silverstone TJ09 case.
Well I just got a UD3R.
In comparison to my Asus P5Q-E that I had I'm disappointed with some things ... the fit isn't as good. The I\O panel fit \ connections is poor and getting my Nvidia 260 GTX to sit was difficult to say the least and it doesn't feel secure. .
If anybody wonder about an aftermarket cooler for the mosfet. The old thermalright HR02-U//S that fit maximus and rampage formula and EK asus 3a backplate also fit this board.(Note that on thermalright website only the I/O mosfet fit)
Forced me to use it since I have some clearance problem with heatsink and the stock jigabyte cooler. The blue color look cool though. :P
Bookmarks