** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[Eeky NoX]

I repeat that I'm now testing the DDR3 version and going forward to Leeghoofd's I4's conclusions !
Is there anything expecting there ? Ask me and I'll throw feedback pleasantly m8tes

Goin' to F7 this week ...than I'll also check my CPUs under dice as soon as possible, but 600FSB is a long story I think :/ (even with the E8600 +F6 bios)

My D9s react strangely and I can't find any help anywhere (no other DDR3 modules anyway -_- )

[DOM.]

Has anyone used a P4 Cpu in there mobo ?

mine only lets me push 1.4v to it like WTF ??

im on bios F9

[Ghostleader]

thanks for the response.the UD3P ddr3 is on the because of pangingIII's results.but i'll be using a dual core so thats why i might get the RE.i hear it great with a dual.

If you gonna run dual, RE is a good choice indeed and as pangingIII wrote "most important, seems to be, to find ram kits that can work well with the board", I agree, it seem like LGA775 DDR3 board is a bit picky about what ram to choose, do some reading before buy ram.

Hi Ghostleader, thanks.
DDR3 one is very similar to the DDR2 one, i just need to spend some time with it, and most important, seems to be, to find ram kits that can work well with the board, and if you already have a good overclocking CPU, then i would say you cant really go wrong with these boards. these boards (UD3P/R's, both DDR2 and DDR3 versions) are probably not the best boards for every needs, but so far to me, they are quite good boards. this's an opinion from just another user.

Thanks for your opinion, I might get a EP45T and see what it can do compare to my RE.

What ram do you have that work well with your board?

[radaja]

thanks for the input Ghostleader,i'll research the ram carefully

[pangingIII]

Thanks for your opinion, I might get a EP45T and see what it can do compare to my RE.

What ram do you have that work well with your board?

right now i use crucial value 2x2GB's DDR3-1333 CAS9-9-9 D9JNM 1.5v,
2x2GB OCZ Flex EX DDR3-2000,
and 2x1GB Crucial Ballistix DDR3-2000 2.0v. but the crucial value ones are best.
i also have a few friends who also uses EP45T's and they are now using Crucial value 2x1GB DDR3-1333 CAS9-9-9 D9JNM 1.5v (actually, they bought the one that are 3x1GB kits),
these Crucial value kits are overclocking well and are working best on the boards and are so cheap.



radaja, if you decide to try the EP45T's, also try the crucial value that i use... 2x2GB's DDR3-1333 CAS9-9-9 D9JNM 1.5v they are very cheap but works best.

[kagula323]

pangingIII u forgot about me ... I just need some starting lines for 600 FSB testing ...

[radaja]

thanks pangingIII for the great info
are these the ones?
http://www.newegg.com/Product/Produc...82E16820148247

[kagula323]

kagula323, any chance of your full BIOS template please so I can see where I might be going wrong (Mine is 3 posts up)?

Here u are

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio .......................: 9
Fine CPU Clock Ratio...................: 0.0
CPU Frequency .........................: 4.50GHz (500X9)

Clock Chip Control

Standard Clock Control

CPU Host Clock Control.................: [Enabled]
CPU Host Frequency (Mhz) ..............: 500
PCI Express Frequency (Mhz) ...........: 100
C.I.A.2 ...............................: [Disabled]

Advanced Clock Control

CPU Clock Drive........................: 800
PCI Express Clock Drive................: 900
CPU Clock Skew (ps)....................: 0
MCH Clock Skew (ps)....................: 0

DRAM Performance Control

Performance Enhance....................: Turbo
Extreme Memory Profile (X.M.P.)........: Disabled
(G)MCH Frequency Latch.................: 333MHz
System Memory Multiplier ..............: 2.40B
Memory Frequency (Mhz) ................: 1200MHz

DRAM Timing Selectable ................: Manual

Standard Timing Control

CAS Latency Time.......................: 5
tRCD ..................................: 5
tRP'...................................: 5
tRAS...................................: 15

Advanced Timing Control

Everything In Advanced Timing Control on auto.
but tRas 9 and Drive Strength Profiles OC-1200



Motherboard Voltage Control

CPU

Load-Line Calibration..................: [Disabled]
CPU Vcore..............................: 1.39375V
CPU Termination........................: 1.32V
CPU PLL................................: 1.50V
CPU Reference..........................: Normal

MCH/ICH

MCH Core...............................: 1.34 or 1.38V
Reference..............................: 0.756
MCH/DRAM Ref...........................: Normal
ICH I/O................................: Normal
ICH Core...............................: Normal

DRAM
DRAM Voltage...........................: 2.32v [set this acording to your ram]
DRAM Termination ......................: Normal
Channel A Reference....................: Normal
Channel B Reference ...................: Normal

[pangingIII]

thanks pangingIII for the great info
are these the ones?
http://www.newegg.com/Product/Produc...82E16820148247

mine are this one
CT25664BA1339.168FD's...
http://www.crucial.com/store/partspe...KIT25664BA1339

it seems like it's supposed to be this one at newegg...
http://www.newegg.com/Product/Produc...82E16820148262

pangingIII u forgot about me ... I just need some starting lines for 600 FSB testing ...

sorry i'm thinking... what's the best suggestion to get you to 600fsb?
if you just want to boot at 600fsb you could try setting every values at the voltage section of the bios to Auto, and see if you can boot into Windows? please try this first.

[DOM.]

pangingIII u forgot about me ... I just need some starting lines for 600 FSB testing ...

Advanced Clock Control

CPU Clock Drive........................: 800
PCI Express Clock Drive................: 800
CPU Clock Skew (ps)....................: 50
MCH Clock Skew (ps)....................: 50


Motherboard Voltage Control

CPU

Load-Line Calibration..................: [Enabled]
CPU Vcore..............................: 1.39375V
CPU Termination........................: 1.34V
CPU PLL................................: 1.50V
CPU Reference..........................: 0.903

MCH/ICH

MCH Core...............................: 1.36V
Reference..............................: 0.788
MCH/DRAM Ref...........................: Normal
ICH I/O................................: Normal
ICH Core...............................: Normal

[Hoss331]

Just doing a little testing on the new water setup. Im probably going to pop the Q9650 back in soon to see how it likes it since it was a hot head to begin with.

[coop]

Quicker with less. I'm cool with this, time to move on.
[IMG][/IMG]

[radaja]

well i got 2 kits of this ram in a trade and next week i'll be getting the ddr3 variant of the UD3P,and was wondering if anyone has tried
this ram with the board?im hoping it will work,if not i'll sell them and get a different kit.i just couldnt pass up the deal for these.so if anyone has used these together maybe you could let me know how they worked.
http://www.zipzoomfly.com/jsp/Produc...odlist=froogle
thanks

[ACK]

Do you think is this board with an E8500 E0 capable to run a 24/7 system with the following specs?

FSB: 449*9.5=4264Ghz (1066*4)
RAM running at 1066Mhz 5-5-5-15 (Kingston HyperX or Crucial Balistix Tracer I have now both pair of modules)
EIST disabled

Cooled by a TRUE & a 120mm FAN into an Antec P182 case.

--------------------------------------------------------


--------------------------------------------------------
I expect will be my next rig in a couple of weeks

Thanks in advance

[gergregg]

Do you think is this board with an E8500 E0 capable to run a 24/7 system with the following specs?

FSB: 449*9.5=4264Ghz (1066*4)
RAM running at 1066Mhz 5-5-5-15 (Kingston HyperX or Crucial Balistix Tracer I have now both pair of modules)
EIST disabled

Should not be a problem.

[bluestang]

Anyone running Kingston HyperX DDR2-1150 or DDR2-1200 2x1 GB kits? If so, I'm looking for help with BIOS settings. System specs in my sig. Thanks!!!

[rubber5]

hi im using the Gigabyte EP45-UD3R and so far i have a q9450@3.2ghz but i really wanted to know what a safe temp is for the cpu and the northbrige
I have a thermalright ifx sli cooler for the northbrige and southbrige no fan and it hits about 55c-58c my cpu cooler is the thermalright xtreme 120mm with silenx 120mm 90cfm one is seems to cool the cpu on on low setting (fan controller)
when primeing my cpu gets to about 58c small ffts (at a max)but is that ok

[rubber5]

i get sqweeling from my cpu when prime gets to 14kb testing but it dont change even when i up core voltage does enyone know why
thanks

[Hoss331]

its normal dont worry about it

[radaja]

yep very common on these boards.comes from the PWM area under load w/OCed.some people exchange thier boards only to have it do it on the new one too.
i've never noticed it on my three boards but my fans would be too loud anyways.most likely they all do it.like hoss331 said,i wouldnt worry too much about it.

[Ruroni]

I've gone back to the F5 bios for the UD3P, and S3 works properly again. I know for certain it wasn't working in F8 or F9. No change in overclocking capabilities it seems.

[radaja]

got my cpu today and fired up the UD3R all good!cant do much OCing as its a low vid chip and i only have the stock heatsink.i have a mini-typhoon with a 92mm/38mm 4000rpm fan mounted on it but it just will not snap down.

[Hoss331]

New run on the 9650.

[Jupiler]

Does the UD3P drops VCore and Multiplier (to 6x) when C1E/EIST is enabled in the bios?

[Hoss331]

Yep