A simple question, I am having fun with this board (EP45-UD3P), but the latest F10 bios is rather crap for overclocking. Does any of you still have the F11c bios laying around? I cant find it anywhere.
It would be really appreciated.
A simple question, I am having fun with this board (EP45-UD3P), but the latest F10 bios is rather crap for overclocking. Does any of you still have the F11c bios laying around? I cant find it anywhere.
It would be really appreciated.
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
I have a strange problem (all bioses) I have a very stable overclock. (8.5 * 500 FSB) linpack stable, OCCT stable. Everything nice and neat. I booted with these settings. Now when i reboot. The MB 'detects' this is not stable, it goes into boot, reboot phase, untill the default BIOS settings are restored.
I know I am a few years late, but wtf?
When i save my OC settings in bios again. It boots normally again. Leaving the PC a little time off. I don't mind the boot/reboot loop as long as it applies my stable settings :p
The problems occurs when i restart from windows it seems.
BTW, my overclock is 8.5 * 500, ram at 500 (DDR2) PL9 1.26Vcore. Is this considered any good?
Last edited by BoredByLife; 06-07-2012 at 07:13 AM.
Decided to go back in time a few years and re-try this board.
Got 3rd in q9650 hardware ranking at HWBot with this 32m run. Would need the T board to do any better I think, but still pretty happy with the score.
Last edited by OC Nub; 07-28-2012 at 06:40 PM.
There's actually 2 different version of the EP45-UD3R board.
I've had good results with the modded F12 bios for the Rev. 1.0 board here:
http://forums.tweaktown.com/gigabyte...fied-bios.html
GA-EP45-UD3R Rev 2.0 Bios F13e
Updated with...
IRST 11.1.0.14.13
Realtek 2.46
Jmicron 1.07.28
EP45UD3RMOD_F13e_4_7_12
GA-EP45-UD3R Rev 1.0 Bios F12
Updated with...
Intel RAID Updated to: 11.5.0.1347
JMicron RAID Updated to: 1.07.28
RealTek PXE Updated to: 2.47
GA-EP45-UD3R_Rev.1.0_F12_6_12_12
System 1: Intel 3570K, Gigabyte Z77X-UD5H (blue capacitors), dual bioses F15o/F15r, Samsung 2x 4 Gb 30nm ULV DDR3, Sony-Optiarc BD-R, dual-boot: Windows 8 Pro 64-bit, Windows XP SP3 32-bit.
System 2: Intel E8400; Gigabyte EP45-UD3R, bios F12, 2x 2 Gb G.Skill PC8800, Seagate SATA HD, nVidia 9500GT; Samsung SATA DVD-RW, dual-boot: OSX Lion, Windows 7 64-bit.
Hi guys... I recently purchased a EP45-UD3P r 1.6 motherboard from eBay because I wanted to use this board as a bench board only and it's list of compatible CPU's was insane. I received the board no issues, looks in mint shape no damage (accept the locking pin on PCIe slot1 was broken off). No worries there.
My issue is that I cannot for the life of me flash the latest FFb BIOS from Gigabyte. The mobo currently has bios FD. Actually both BIOS's on the mobo are at FD. I've tried Qflash and @BIOS and they both fail while erasing the chip. Another thing I
notice is that I cannot save any CMOS settings onto the available slots. I can save my CMOS to my HDD but the actual BIOS chip. I have tried bios FA,FB and FFb and they all fail. I have also tired by passing my main bios by setting up a jump on pin 5 and 6 on the main bios forcing the main bios to by flash again from the backup bios and I still can't flash the main bios. Has anybody heard of this issue? Looking on google I have found 1 other guy that had the same issue as me and he as well was not able to get his bios flash.
I have tried so many things. Like different RAM, CPU,PSU and video card.
One thing I can do though is save my BIOS onto the HDD or usb stick and then I am able to re-flash my bios onto the chip, but I cannot flash a new bios to the chip I am completely lost.
Any help would be awesome. thanks in advance
hey guys,
So I have wanted to hunt down a p45-UD3P for a while and finally found 2 but I can only get 1.
one is a version 1.0 and one is a version 1.1
Which for a straight overclocking board would be better? I will be using celerons and D's),Pentium 4's, Core 2 duos and quads.
I might be putting the board under cold in the future so that would have to be considered.
I though I would ask here as XS seems to be knowledge with this board.
opinions/Advice?
Work/Gaming: i7-950|GB X58A-UD7|12GB Trident BBSE/XMS3|460GTX|WD 1TB BLK|Pioneer DVDRW|CM HAF-X|Win 7 Pro 64 bit|U2711|HX850|G500|G510
Heatware: jimba86
Bench:Custom Giga-bench|Win 7/XP SP3|WD 36GB Raptor|Dell 22|AX1200|MS intellimouse
Bench 1:i7 930|water 2.0 performer|Gigabyte X58A-OC | 4GB corsair 1866 CL7|GTX 295 Quad SLI
Bench 2:E8500|NHD14|P45-UD3P(2nd PCIEx16 slot broken.. )|2GB Corsair 8888 Cl4|GTX 260 SOC
(Bench 3: In Progress) 4770K|F1EE|Gigabyte Z97X-SOC Force| 4GB GTX1 /8GB Gskill TridentX 2666CL11 ney pro|5870 x3 on KPC tek9 slim 5.0/7.0
Bench 4 E8600|NHD14|REX|2GB Corsair 1800 Cl7|Asus GTX 280
Bench 5 (TBC): FX?|990FX-UD7|Gskill Flare 2000 Cl7|6970
Server/renderbox: G3258|TT Water 2.0|Gigabyte Z87 Sniper M5|8GB Gskill Sniper 2133|gigabyte 5750|FD NODE 804
Work/Gaming: i7-950|GB X58A-UD7|12GB Trident BBSE/XMS3|460GTX|WD 1TB BLK|Pioneer DVDRW|CM HAF-X|Win 7 Pro 64 bit|U2711|HX850|G500|G510
Heatware: jimba86
Bench:Custom Giga-bench|Win 7/XP SP3|WD 36GB Raptor|Dell 22|AX1200|MS intellimouse
Bench 1:i7 930|water 2.0 performer|Gigabyte X58A-OC | 4GB corsair 1866 CL7|GTX 295 Quad SLI
Bench 2:E8500|NHD14|P45-UD3P(2nd PCIEx16 slot broken.. )|2GB Corsair 8888 Cl4|GTX 260 SOC
(Bench 3: In Progress) 4770K|F1EE|Gigabyte Z97X-SOC Force| 4GB GTX1 /8GB Gskill TridentX 2666CL11 ney pro|5870 x3 on KPC tek9 slim 5.0/7.0
Bench 4 E8600|NHD14|REX|2GB Corsair 1800 Cl7|Asus GTX 280
Bench 5 (TBC): FX?|990FX-UD7|Gskill Flare 2000 Cl7|6970
Server/renderbox: G3258|TT Water 2.0|Gigabyte Z87 Sniper M5|8GB Gskill Sniper 2133|gigabyte 5750|FD NODE 804
Bookmarks