MMM
    X

    Subscribe to New Ads!

    Receive weekly ads in your inbox!



Page 171 of 298 FirstFirst ... 71121161168169170171172173174181221271 ... LastLast
Results 4,251 to 4,275 of 7441

Thread: ** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

  1. #4251
    Registered User
    Join Date
    May 2009
    Posts
    16
    Code:
    ******Motherboard Intelligent Tweaker (M.I.T.)******
     
    Robust Graphics Booster.........................[ Auto     ]
    CPU Clock Ratio.................................[ 8        ]
    Fine CPU Clock Ratio............................[ + 0.0    ]
    CPU Frequency 4.00GHz..........................[ 500 x 8.0]
     
    ******Clock Chip Control******
     
    CPU Host Clock Control..........................[ Enabled  ]
    CPU Host Frequency (Mhz)........................[ 500      ]
    PCI Express Frequency (Mhz).....................[ 100      ]
    C.I.A 2.........................................[ Disabled ]
    
     
    ******DRAM Performance Control******
     
    Performance Enhance.............................[ Standard ]
    (G) MCH Frequency Latch.........................[ 266      ]
    System Memory Multipler.........................[ 2.00D    ]
    DRAM Timing Selectable..........................[ Manual   ]
     
    CAS Latency Time................................[ 5       ]
    tRCD............................................[ 5       ]
    tRP.............................................[ 5       ]
    tRAS............................................[ 15      ]
    
     
    ******Motherboard Voltage Control******
     
    Load-Line Calibration...........................[ Enabled ]
    CPU Vcore         [ 1.15    ]...................[ 1.350   ]
    CPU Termination   [ 1.20    ]...................[ 1.280   ]
    CPU PLL           [ 1.50    ]...................[ 1.570   ]
    CPU Reference     [ 0.760   ]...................[ 0.780   ]
     
    MCH Core          [ 1.100   ]...................[ 1.360   ]
    MCH Reference     [ 0.760   ]...................[ 0.750   ]
    MCH/DRAM Refernce [ 0.900   ]...................[ 1.110   ]
    ICH I/O           [ 1.500   ]...................[ 1.500   ]
    ICH Core          [ 1.100   ]...................[ 1.100   ]
     
    DRAM Voltage      [ 1.800   ]...................[ 1.900   ]
    DRAM Termination  [ 0.900   ]...................[ 0.960   ]
    Channel A Ref     [ 0.900   ]...................[ 0.960   ]
    Channel B Ref     [ 0.900   ]...................[ 0.960   ]
    
    ******Advanced BIOS Features******
     
    Limit CPUID Max to 3............................[ Disabled ]
    No-Execute memory Protect.......................[ Disabled ]
    CPU Enhance Halt (CIE)..........................[ Disabled ]
    C2/C2E State Support............................[ Disabled ]
    C4/C4E State Support............................[ Disabled ]
    CPU Thermal Monitor.............................[ Disabled ]
    CPU EIST Function...............................[ Disabled ]
    Virtualization Technology.......................[ Enabled ]
    I can't seem to get above 4GHz. I've tried a $|-|!T|_()/-\|) of changes but none have even allowed me to boot up. What changes should I make to the above settings to get to 4.25GHz (or anything 4GHz+).
    i5-2500K
    Gigabyte GA-Z68X-UD3H-B3
    Palit Sonic GTX 460 1GB SLI
    G.Skill RipjawsX 1600 MHz 2x4GB
    Cooler Master Hyper 212+
    Corsair CMPSU-750TX 750W

  2. #4252
    Xtreme Member
    Join Date
    Jun 2006
    Location
    OverBr.com.br
    Posts
    167
    LLC on, is dangerous in cpu 45nm ?
    Sorry my bad English Language Tools
    http://www.google.com.br/language_tools?hl=pt-BR
    Q9550 | Gigabyte GA-EP45-UD3P (rev. 1.1) | 4x1GB | SLI 98GTX | LC8850 750w
    4685.99 Mhz (H20) - http://valid.canardpc.com/show_oc.php?id=689328
    WC - CPU Swiftech Apogee GTZ | Enzotech SNBW | VGA Koolance VID-398 | Rad MagiCool 360ST | Pump DP-1200 | MCRES-Micro Rev2.



  3. #4253
    Xtreme Member
    Join Date
    Mar 2008
    Location
    Pennsylvania
    Posts
    166
    Quote Originally Posted by gugle View Post
    LLC on, is dangerous in cpu 45nm ?
    I'de say no. I use it all the time and it hasn't done my CPU any harm.

    It can't be any worse than a vDroop mod.

  4. #4254
    Xtreme Addict
    Join Date
    Jun 2008
    Posts
    1,681
    I'm so pissed off at Gigabyte right now, why the did they make the max vcore for Celeron's only 1.4vcore? WTF on a E8600 you can do to 2.3vcore, but no, on the older CPUs (that need more) you only get 1.4vcore and who only needs 1.4vcore, its nothing. May as well not even raise it at all.

    I still got 5.2GHz with only 1.376vcore, which I think is pretty good. Howwever ofc I need 1.8vcore at least so I can do some 6.5GHz+ benching.

    Does anyone know a way around this and would a new BIOS help etc? Or is there a good reason why they did this?

    Thanks

  5. #4255
    Xtreme Member
    Join Date
    May 2008
    Location
    Sydney, Australia
    Posts
    242
    Cross-post with: http://www.xtremesystems.org/forums/...19&postcount=1(Beep codes during POST - Are they made by CPU running, or m/b hardware? Q9650, P45mb).

    I've got some major hardware failure problems with my Q9650/UD3R system, and I don't know exactly what has happened or why. More details in above post.
    I was running with FSB=468, VNB=1.48 when things went awry. I asked in the post re max safe VNB for P45s, but no-one has answered (can't fit everything in a title). Hoping you guys might help ...

    Oh, and I've never lifted the heatpipe assy off the UD3R, but I did have a 120mm fan leaning against the TRUE, blowing straight onto the P45.

    My dilemma is also that I don't want to buy more LGA775 stuff now, but to test which components are faulty/saleable I need more DDR2 RAM and another CPU would be helpful.

  6. #4256
    Xtreme Member
    Join Date
    Feb 2008
    Posts
    192
    Quote Originally Posted by BlindFreddie View Post
    Cross-post with: http://www.xtremesystems.org/forums/...19&postcount=1(Beep codes during POST - Are they made by CPU running, or m/b hardware? Q9650, P45mb).

    I've got some major hardware failure problems with my Q9650/UD3R system, and I don't know exactly what has happened or why. More details in above post.
    I was running with FSB=468, VNB=1.48 when things went awry. I asked in the post re max safe VNB for P45s, but no-one has answered (can't fit everything in a title). Hoping you guys might help ...

    Oh, and I've never lifted the heatpipe assy off the UD3R, but I did have a 120mm fan leaning against the TRUE, blowing straight onto the P45.

    My dilemma is also that I don't want to buy more LGA775 stuff now, but to test which components are faulty/saleable I need more DDR2 RAM and another CPU would be helpful.
    I don't think 1.48V vNB/vMCH is too high for P45. I've run 1.5 on my previous Gigabyte P35-DS3L board which has a tiny NB cooler.

    Reset your BIOS and try to get it to POST. If it still can't then you've got something loose somewhere or a faulty component. Start with the easy stuff first (RAM, expansion cards). Sometimes disconnecting and re-connecting your PSU cables to the mobo can help.

  7. #4257
    Xtreme Member
    Join Date
    Feb 2008
    Posts
    192
    Really liking this board so far. My new Q9550 is giving fantastic preliminary results on it. 3.6GHz @ stock volts (425x8.5) and only a vMCH bump to 1.3 delivers a full pass in OCCT Linpack. Shooting for 4GHz on air (OCZ Vendetta 2 push-pull w/stock fan & Scythe 1900 RPM 110CFM fan). VTT, PLL, & GTL Ref @ stock still. Temps in the mid-60's in OCCT in a hot apartment with practically worthless AC.

  8. #4258
    Xtreme Member
    Join Date
    Feb 2008
    Posts
    192
    4GHz (8.5x471) now OCCT Linpack stable @ 77 degrees. vMCH 1.4, vCore 1.375 BIOS (1.33 Windows), LLC enabled, vTT 1.3V, all else stock.

    That was the easiest overclock ever.

  9. #4259
    Xtreme Addict
    Join Date
    Dec 2007
    Posts
    2,383
    Put my q9550 back in for more testing today. Have had more time now to learn this mobo. This is where I am at now. Core 2 sensor is bugged but if at least one sensor wasn't off I would think something was wrong.

    Last edited by OC Nub; 08-09-2009 at 11:56 AM.

  10. #4260
    Registered User
    Join Date
    Dec 2008
    Posts
    57
    Quote Originally Posted by OC Nub View Post
    Put my q9550 back in for more testing today. Have had more time now to learn this mobo. This is where I am at now. Core 2 sensor is bugged but if at least one sensor wasn't off I would think something was wrong.

    My core2 is like that also. I'm going to reapply thermal paste next week to see if anything changes. Also may I ask what settings you are using to get that oc? I can't get 500fsb stable no matter what I do w/ my chip.

  11. #4261
    Xtreme Addict
    Join Date
    Dec 2007
    Posts
    2,383
    Quote Originally Posted by Homeless2 View Post
    My core2 is like that also. I'm going to reapply thermal paste next week to see if anything changes. Also may I ask what settings you are using to get that oc? I can't get 500fsb stable no matter what I do w/ my chip.
    I will try and make a template tonight for these settings.

  12. #4262
    Xtreme Member
    Join Date
    Feb 2008
    Posts
    192
    Finally hit 20k in 3dmark 06. Not bad for a single GTX 285 and a Q9 on air, IMHO.

  13. #4263
    Xtreme Addict
    Join Date
    Dec 2007
    Posts
    2,383
    Quote Originally Posted by Homeless2 View Post
    My core2 is like that also. I'm going to reapply thermal paste next week to see if anything changes. Also may I ask what settings you are using to get that oc? I can't get 500fsb stable no matter what I do w/ my chip.
    Sorry I havent learned to use the code yet. You can try this using 200d pl9 standard or turbo and trfc auto depending on your ram.

    ******Motherboard Intelligent Tweaker (M.I.T.)******

    Robust Graphics Booster.........................[ Turbo ]
    CPU Clock Ratio.................................[ 8 ]
    Fine CPU Clock Ratio............................[ + 0.5 ]
    CPU Frequency 4.35GHz............................[ 512 x 8.5]

    ******Clock Chip Control******

    CPU Host Clock Control..........................[ Enabled ]
    CPU Host Frequency (Mhz)........................[ 512 ]
    PCI Express Frequency (Mhz).....................[ 100 ]
    C.I.A 2.........................................[ Disabled ]

    ******Advanced Clock Control******

    CPU Clock Drive.................................[ 800mv ]
    PCI Express Clock Drive.........................[ 800mv ]
    CPU Clock Skew..................................[ 0ps ]
    MCH Clock Skew..................................[ 50ps ]

    ******DRAM Performance Control******

    Performance Enhance.............................[ Turbo ]
    Extreme Memory Profile (X.M.P)..................[ Auto ]
    (G) MCH Frequency Latch.........................[ 333 ]
    System Memory Multipler.........................[ 2.40B ]
    Memory Frequency 1066...........................[ 1228? ]
    DRAM Timing Selectable..........................[ Manual ]

    CAS Latency Time................................[ 5 ]
    tRCD............................................[ 5 ]
    tRP.............................................[ 5 ]
    tRAS............................................[ 15 ]

    ******Advanced Timing Control******

    tRRD[4].........................................[ auto ]
    tWTR[4].........................................[ auto ]
    tWR[13].........................................[ auto ]
    tRFC[68] .......................................[ 50 ]
    tRTP[4].........................................[ auto ]
    Command Rate (cmd)[0]...........................[ Auto ]

    ******Channel A Timing Settings******

    Static tRead Value [ 9 ] ................[ 8 ]
    tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase3 Adjustment [ 0 ] ................[ Auto ]

    tRD 2rd (Differnt Rank) [ 8 ] ................[ auto ]
    tWR 2wr (Differnt Rank) [ 8 ] ................[ auto ]
    tWR 2rd (Differnt Rank) [ 7 ] ................[ auto ]
    tRD 2wr (Same/Difft Rank) [ 9 ] ................[ auto ]

    Dimm 1 Clock Skew Control.......................[ Auto ]
    Dimm 2 Clock Skew Control.......................[ Auto ]
    DDR Write Training..............................[ Auto ]

    ******Channel A Driving Settings******

    Drive Strength Profile..........................[ Auto ]
    Data Driving Pull Up Level......................[ Auto ]
    cmd Driving Pull Up Level.......................[ Auto ]
    ctrl Driving Pull Up Level......................[ Auto ]
    clk Driving Pull Up Level.......................[ Auto ]

    Data Driving Pull Down Level....................[ Auto ]
    cmd Driving Pull Down Level.....................[ Auto ]
    ctrl Driving Pull Down Level....................[ Auto ]
    clk Driving Pull Down Level.....................[ Auto ]

    ******Channel B Timing Settings******

    Static tRead Value [ 9 ] ................[ 8 ]
    tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase3 Adjustment [ 0 ] ................[ Auto ]

    tRD 2rd (Differnt Rank) [ 8 ] ................[ auto ]
    tWR 2wr (Differnt Rank) [ 8 ] ................[ auto ]
    tWR 2rd (Differnt Rank) [ 7 ] ................[ auto ]
    tRD 2wr (Same/Difft Rank) [ 9 ] ................[ auto ]

    Dimm 1 Clock Skew Control.......................[ Auto ]
    Dimm 2 Clock Skew Control.......................[ Auto ]
    DDR Write Training..............................[ Auto ]

    ******Channel B Driving Settings******

    Drive Strength Profile..........................[ Auto ]
    Data Driving Pull Up Level......................[ Auto ]
    cmd Driving Pull Up Level.......................[ Auto ]
    ctrl Driving Pull Up Level......................[ Auto ]
    clk Driving Pull Up Level.......................[ Auto ]

    Data Driving Pull Down Level....................[ Auto ]
    cmd Driving Pull Down Level.....................[ Auto ]
    ctrl Driving Pull Down Level....................[ Auto ]
    clk Driving Pull Down Level.....................[ Auto ]

    ******Motherboard Voltage Control******

    Load-Line Calibration...........................[ Enabled ]
    CPU Vcore [ 1.1875 ]...................[ 1.40 ]
    CPU Termination [ 1.20 ]...................[ 1.360 ]
    CPU PLL [ 1.50 ]...................[ 1.570 ]
    CPU Reference [ 0.760 ]...................[ 0.886 ]

    MCH Core [ 1.100 ]...................[ 1.460 ]
    MCH Reference [ 0.760 ]...................[ 0.901 ]
    MCH/DRAM Refernce [ 0.900 ]...................[ Auto ]
    ICH I/O [ 1.500 ]...................[ 1.500 ]
    ICH Core [ 1.100 ]...................[ 1.200 ]

    DRAM Voltage [ 1.800 ]...................[ 2.16 ]
    DRAM Termination [ 0.900 ]...................[ Auto ]
    Channel A Ref [ 0.900 ]...................[ Auto ]
    Channel B Ref [ 0.900 ]...................[ Auto ]

    ******Advanced BIOS Features******

    Limit CPUID Max to 3............................[ Disabled ]
    No-Execute memory Protect.......................[ Disabled ]
    CPU Enhance Halt (CIE)..........................[ Disabled ]
    C2/C2E State Support............................[ Disabled ]
    C4/C4E State Support............................[ Disabled ]
    CPU Thermal Monitor.............................[ Disabled ]
    CPU EIST Function...............................[ Disabled ]
    Virtualization Technology.......................[ Disabled

    Nice score techguy
    Last edited by OC Nub; 08-09-2009 at 06:51 PM.

  14. #4264
    Xtreme Member
    Join Date
    Mar 2008
    Location
    Pennsylvania
    Posts
    166
    Quote Originally Posted by OC Nub View Post
    Sorry I havent learned to use the code yet. You can try this using 200d pl9 standard or turbo and trfc auto depending on your ram.
    To use code click the number sign(pound sign) under message while in the advanced reply to thread page. Upon clicking it [CODE][CODE] will appear, the second code will have / before CODE.

    Enter the message you want to be in code between the two sets of [CODE] and that's it.

    It should look like [CODE]message here[CODE] but with a / before the second CODE and after the bracket.

  15. #4265
    Xtreme Addict
    Join Date
    Dec 2007
    Posts
    2,383
    Thank you. I will try that for sure. After spending months on this thread I felt stupid asking.
    Last edited by OC Nub; 08-10-2009 at 07:05 AM.

  16. #4266
    Xtreme X.I.P.
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,437
    Quote Originally Posted by OC Nub View Post
    Thank you. I will try that for sure. After spending months on this thread I felt stupid asking.
    Why so mate we always learn something everyday

    Cheers all
    Sergio
    Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
    ASRock X299 OC Formula
    ADATA XPG SPECTRIX D60G (4x8GB) DDR4-3800C17 B-Die
    1x Intel Optane SSD 905P 480GB
    4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
    EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
    SilverStone ST1500W-TI TITANIUM
    Alphacool Custom Water Cooling

  17. #4267
    Xtreme Cruncher
    Join Date
    Nov 2008
    Location
    NE Ohio, USA
    Posts
    1,568
    Quote Originally Posted by bluestang View Post
    Just got a new build at work for myself to play with. Had to order everything from TigerDirect on company account, so options were limited. (my work is cheap, but I managed to at least get this)...

    GA-EP45T-UD3LR (F5 BIOS)
    E7500 (1.200 VID)
    OCZ DDR3 PC3-12800 XMP DDR3-1600 on sale at TigerDirect.com

    Anyone have a 500 FSB BIOS setting they can share. Leeghoofd, I think you used this board in your E6300, E7400, E8600 cache battle. Can you please post some settings you used? Thanks!
    Quote Originally Posted by hank123 View Post
    dude if you get that ram over 1600Mhz with out using a 3:5 divider i will give you a high 5. This mobo sucks ass for DDR3.

    Dude running up to 500FSB is cake on this mobo. Drop the divider and run up the FSB. No problem lol really that easy!
    Quote Originally Posted by bluestang View Post
    Can you post some of your BIOS Settings? That would be great!

    Right now I'm just starting off so I'm doing 10x400FSB with the 4.0A divider for 1600MHZ @ 7-7-7-28-PL8 with 1.96v in BIOS, LLC Enabled, 1.325v BIOS, 1.34v MCH, 1.24v VTT, all other on normal and Ref's on on auto for now.

    Any help you can give me on 500FSB settings would be much appreciated
    @Hank,
    So far here is where I'm at. I'm wondering if my core temps are screwy. CPU temp is @ 67c max when core temps are at 56c max...Does that make sense? I know they're stuck at a min of 40c, so that sucks too.

    Home PC -- 24/7 Cruncher #1
    GA-P67A-UD4-B3 BIOS F8 mod, 2600k (L051B138) @ 4.5 GHz, 1.260v full load, Arctic Liquid 120, (Boots Win7 @ 5.6 GHz per Massman binning)
    Samsung Green 2x4GB @2133 C10, 2x MSI 1660ti, Vertex 4 128GB, 2x3TB WD Red RAID1, BR Burner, Win7 Ult x64, Enthoo Pro, HX750

    Work PC -- 24/7 Cruncher #2 ... Crucial M225 64GB SSD Donated to Endurance Testing (Died at 968 TB of writes...no that is not a typo!)
    GA-EP45T-UD3LR BIOS F10 modded, Q6600 G0 VID 1.212 (L731B536), 3.6 GHz 9x400 @ 1.312v full load, Zerotherm Zen FZ120
    OCZ 2x2GB DDR3-1600MHz C7, Gigabyte 7950 @1200/1250, Crucial MX100 128GB, 2x1TB WD Red RAID1, Win7 Ent x64, Centurion 590, XFX PRO650W

    Music System
    SB Server->SB Touch w/Android Tablet as a remote->S/PDIF->Denon AVR-X3300W->JBL Studio Series Floorstanding Speakers


  18. #4268
    Registered User
    Join Date
    Dec 2008
    Posts
    57
    Quote Originally Posted by OC Nub View Post
    Sorry I havent learned to use the code yet. You can try this using 200d pl9 standard or turbo and trfc auto depending on your ram.

    ******Motherboard Intelligent Tweaker (M.I.T.)******

    Robust Graphics Booster.........................[ Turbo ]
    CPU Clock Ratio.................................[ 8 ]
    Fine CPU Clock Ratio............................[ + 0.5 ]
    CPU Frequency 4.35GHz............................[ 512 x 8.5]

    ******Clock Chip Control******

    CPU Host Clock Control..........................[ Enabled ]
    CPU Host Frequency (Mhz)........................[ 512 ]
    PCI Express Frequency (Mhz).....................[ 100 ]
    C.I.A 2.........................................[ Disabled ]

    ******Advanced Clock Control******

    CPU Clock Drive.................................[ 800mv ]
    PCI Express Clock Drive.........................[ 800mv ]
    CPU Clock Skew..................................[ 0ps ]
    MCH Clock Skew..................................[ 50ps ]

    ******DRAM Performance Control******

    Performance Enhance.............................[ Turbo ]
    Extreme Memory Profile (X.M.P)..................[ Auto ]
    (G) MCH Frequency Latch.........................[ 333 ]
    System Memory Multipler.........................[ 2.40B ]
    Memory Frequency 1066...........................[ 1228? ]
    DRAM Timing Selectable..........................[ Manual ]

    CAS Latency Time................................[ 5 ]
    tRCD............................................[ 5 ]
    tRP.............................................[ 5 ]
    tRAS............................................[ 15 ]

    ******Advanced Timing Control******

    tRRD[4].........................................[ auto ]
    tWTR[4].........................................[ auto ]
    tWR[13].........................................[ auto ]
    tRFC[68] .......................................[ 50 ]
    tRTP[4].........................................[ auto ]
    Command Rate (cmd)[0]...........................[ Auto ]

    ******Channel A Timing Settings******

    Static tRead Value [ 9 ] ................[ 8 ]
    tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase3 Adjustment [ 0 ] ................[ Auto ]

    tRD 2rd (Differnt Rank) [ 8 ] ................[ auto ]
    tWR 2wr (Differnt Rank) [ 8 ] ................[ auto ]
    tWR 2rd (Differnt Rank) [ 7 ] ................[ auto ]
    tRD 2wr (Same/Difft Rank) [ 9 ] ................[ auto ]

    Dimm 1 Clock Skew Control.......................[ Auto ]
    Dimm 2 Clock Skew Control.......................[ Auto ]
    DDR Write Training..............................[ Auto ]

    ******Channel A Driving Settings******

    Drive Strength Profile..........................[ Auto ]
    Data Driving Pull Up Level......................[ Auto ]
    cmd Driving Pull Up Level.......................[ Auto ]
    ctrl Driving Pull Up Level......................[ Auto ]
    clk Driving Pull Up Level.......................[ Auto ]

    Data Driving Pull Down Level....................[ Auto ]
    cmd Driving Pull Down Level.....................[ Auto ]
    ctrl Driving Pull Down Level....................[ Auto ]
    clk Driving Pull Down Level.....................[ Auto ]

    ******Channel B Timing Settings******

    Static tRead Value [ 9 ] ................[ 8 ]
    tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase3 Adjustment [ 0 ] ................[ Auto ]

    tRD 2rd (Differnt Rank) [ 8 ] ................[ auto ]
    tWR 2wr (Differnt Rank) [ 8 ] ................[ auto ]
    tWR 2rd (Differnt Rank) [ 7 ] ................[ auto ]
    tRD 2wr (Same/Difft Rank) [ 9 ] ................[ auto ]

    Dimm 1 Clock Skew Control.......................[ Auto ]
    Dimm 2 Clock Skew Control.......................[ Auto ]
    DDR Write Training..............................[ Auto ]

    ******Channel B Driving Settings******

    Drive Strength Profile..........................[ Auto ]
    Data Driving Pull Up Level......................[ Auto ]
    cmd Driving Pull Up Level.......................[ Auto ]
    ctrl Driving Pull Up Level......................[ Auto ]
    clk Driving Pull Up Level.......................[ Auto ]

    Data Driving Pull Down Level....................[ Auto ]
    cmd Driving Pull Down Level.....................[ Auto ]
    ctrl Driving Pull Down Level....................[ Auto ]
    clk Driving Pull Down Level.....................[ Auto ]

    ******Motherboard Voltage Control******

    Load-Line Calibration...........................[ Enabled ]
    CPU Vcore [ 1.1875 ]...................[ 1.40 ]
    CPU Termination [ 1.20 ]...................[ 1.360 ]
    CPU PLL [ 1.50 ]...................[ 1.570 ]
    CPU Reference [ 0.760 ]...................[ 0.886 ]

    MCH Core [ 1.100 ]...................[ 1.460 ]
    MCH Reference [ 0.760 ]...................[ 0.901 ]
    MCH/DRAM Refernce [ 0.900 ]...................[ Auto ]
    ICH I/O [ 1.500 ]...................[ 1.500 ]
    ICH Core [ 1.100 ]...................[ 1.200 ]

    DRAM Voltage [ 1.800 ]...................[ 2.16 ]
    DRAM Termination [ 0.900 ]...................[ Auto ]
    Channel A Ref [ 0.900 ]...................[ Auto ]
    Channel B Ref [ 0.900 ]...................[ Auto ]

    ******Advanced BIOS Features******

    Limit CPUID Max to 3............................[ Disabled ]
    No-Execute memory Protect.......................[ Disabled ]
    CPU Enhance Halt (CIE)..........................[ Disabled ]
    C2/C2E State Support............................[ Disabled ]
    C4/C4E State Support............................[ Disabled ]
    CPU Thermal Monitor.............................[ Disabled ]
    CPU EIST Function...............................[ Disabled ]
    Virtualization Technology.......................[ Disabled

    Nice score techguy
    Thanks

  19. #4269
    Xtreme Member
    Join Date
    Jun 2006
    Location
    OverBr.com.br
    Posts
    167
    What could be the options in the bios, a UD3P + Q9550 stable at 4.5 GHz?

    thanks
    Sorry my bad English Language Tools
    http://www.google.com.br/language_tools?hl=pt-BR
    Q9550 | Gigabyte GA-EP45-UD3P (rev. 1.1) | 4x1GB | SLI 98GTX | LC8850 750w
    4685.99 Mhz (H20) - http://valid.canardpc.com/show_oc.php?id=689328
    WC - CPU Swiftech Apogee GTZ | Enzotech SNBW | VGA Koolance VID-398 | Rad MagiCool 360ST | Pump DP-1200 | MCRES-Micro Rev2.



  20. #4270
    Xtreme Member
    Join Date
    Mar 2008
    Location
    Forney,TX where Dallas ends and living begins.
    Posts
    470
    Sorry if this is a bit noobish, how do I copy and paste my bios settings like:

    Quote Originally Posted by Hoss331 View Post
    Try this one.

    Code:
    ******Motherboard Intelligent Tweaker (M.I.T.)******
     
    Robust Graphics Booster.........................[ Auto     ]
    CPU Clock Ratio.................................[ 9        ]
    Fine CPU Clock Ratio............................[ + 0.0    ]
    CPU Frequency 4.05GHz...........................[ 450 x 9.0]
     
    ******Clock Chip Control******
     
    CPU Host Clock Control..........................[ Enabled  ]
    CPU Host Frequency (Mhz)........................[ 450      ]
    PCI Express Frequency (Mhz).....................[ 100      ]
    C.I.A 2.........................................[ Disabled ]
     
    ******Advanced Clock Control******
     
    CPU Clock Drive.................................[ 800mv   ]
    PCI Express Clock Drive.........................[ 900mv   ]
    CPU Clock Skew..................................[ 0ps     ]
    MCH Clock Skew..................................[ 0ps     ]
     
    ******DRAM Performance Control******
     
    Performance Enhance.............................[ Standard ]
    (G) MCH Frequency Latch.........................[ 400      ]
    System Memory Multipler.........................[ 2.00D    ]
    Memory Frequency 1066...........................[ 900      ]
    DRAM Timing Selectable..........................[ Manual   ]
     
    CAS Latency Time................................[ 4       ]
    tRCD............................................[ 4       ]
    tRP.............................................[ 4       ]
    tRAS............................................[ 12      ]
     
    ******Advanced Timing Control******
     
    tRRD[3].........................................[ 3       ]
    tWTR[3].........................................[ 3       ]
    tWR[6]..........................................[ 6       ]
    tRFC[54]........................................[ 52      ]
    tRTP[3].........................................[ 3       ]
    Command Rate (cmd)[0]...........................[ 2T      ]
     
    ******Channel A Timing Settings******     
     
    Static tRead Value        [ 8 ] ................[ 9       ]
    tRD Phase0 Adjustment     [ 0 ] ................[ Auto    ]
    tRD Phase1 Adjustment     [ 0 ] ................[ Auto    ]
    tRD Phase2 Adjustment     [ 0 ] ................[ Auto    ]
    tRD Phase3 Adjustment     [ 0 ] ................[ Auto    ]
     
    tRD 2rd (Differnt Rank)   [ 6 ] ................[ Auto    ]
    tWR 2wr (Differnt Rank)   [ 6 ] ................[ Auto    ]
    tWR 2rd (Differnt Rank)   [ 5 ] ................[ Auto    ]
    tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto    ]
     
    Dimm 1 Clock Skew Control.......................[ Auto    ]
    Dimm 2 Clock Skew Control.......................[ Auto    ]
    DDR Write Training..............................[ Auto    ]
     
    ******Channel A Driving Settings****** 
     
    Drive Strength Profile..........................[ 1066    ]
    Data Driving Pull Up Level......................[ Auto    ]
    cmd Driving Pull Up Level.......................[ Auto    ]
    ctrl Driving Pull Up Level......................[ Auto    ]
    clk Driving Pull Up Level.......................[ Auto    ]
     
    Data Driving Pull Down Level....................[ Auto    ]
    cmd Driving Pull Down Level.....................[ Auto    ]
    ctrl Driving Pull Down Level....................[ Auto    ]
    clk Driving Pull Down Level.....................[ Auto    ]
     
    ******Channel B Timing Settings******     
     
    Static tRead Value        [ 8 ] ................[ 9       ]
    tRD Phase0 Adjustment     [ 0 ] ................[ Auto    ]
    tRD Phase1 Adjustment     [ 0 ] ................[ Auto    ]
    tRD Phase2 Adjustment     [ 0 ] ................[ Auto    ]
    tRD Phase3 Adjustment     [ 0 ] ................[ Auto    ]
     
    tRD 2rd (Differnt Rank)   [ 6 ] ................[ Auto    ]
    tWR 2wr (Differnt Rank)   [ 6 ] ................[ Auto    ]
    tWR 2rd (Differnt Rank)   [ 5 ] ................[ Auto    ]
    tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto    ]
     
    Dimm 1 Clock Skew Control.......................[ Auto    ]
    Dimm 2 Clock Skew Control.......................[ Auto    ]
    DDR Write Training..............................[ Auto    ]
     
    ******Channel B Driving Settings****** 
     
    Drive Strength Profile..........................[ 1066    ]
    Data Driving Pull Up Level......................[ Auto    ]
    cmd Driving Pull Up Level.......................[ Auto    ]
    ctrl Driving Pull Up Level......................[ Auto    ]
    clk Driving Pull Up Level.......................[ Auto    ]
     
    Data Driving Pull Down Level....................[ Auto    ]
    cmd Driving Pull Down Level.....................[ Auto    ]
    ctrl Driving Pull Down Level....................[ Auto    ]
    clk Driving Pull Down Level.....................[ Auto    ]
     
    ******Motherboard Voltage Control******
     
    Load-Line Calibration...........................[ Enabled ]
    CPU Vcore         [ 1.15    ]...................[ 1.37500 ]
    CPU Termination   [ 1.20    ]...................[ 1.280   ]
    CPU PLL           [ 1.50    ]...................[ 1.500   ]
    CPU Reference     [ 0.760   ]...................[ 0.835   ]
     
    MCH Core          [ 1.100   ]...................[ 1.280   ]
    MCH Reference     [ 0.760   ]...................[ 0.850   ]
    MCH/DRAM Refernce [ 0.900   ]...................[ 1.050   ]
    ICH I/O           [ 1.500   ]...................[ 1.500   ]
    ICH Core          [ 1.100   ]...................[ 1.100   ]
     
    DRAM Voltage      [ 1.800   ]...................[ 2.100   ]
    DRAM Termination  [ 0.900   ]...................[ 1.050   ]
    Channel A Ref     [ 0.900   ]...................[ 1.050   ]
    Channel B Ref     [ 0.900   ]...................[ 1.050   ]
    
    ******Advanced BIOS Features******
     
    Limit CPUID Max to 3............................[ Disabled ]
    No-Execute memory Protect.......................[ Disabled ]
    CPU Enhance Halt (CIE)..........................[ Disabled ]
    C2/C2E State Support............................[ Disabled ]
    C4/C4E State Support............................[ Disabled ]
    CPU Thermal Monitor.............................[ Disabled ]
    CPU EIST Function...............................[ Disabled ]
    Virtualization Technology.......................[ Disabled ]
    http://valid.canardpc.com/show_oc.php?id=643273
    Do you fold?

    SuperPi 1M 10.984s @ 4.25GHz
    Cool Blue
    Gigabyte EP45-UD3P Rev 1.1
    E8400 E0 @ 4.1 GHz
    Zalmann 9500
    2x2GB GSkill 9600 5-5-5-15 1212 MHz 2.1v PL8
    9600GSO (I'm a folder, not a gamer)
    Corsair VX550 80Plus
    WD 500GB SATA3
    Antec 900

  21. #4271
    Xtreme Enthusiast
    Join Date
    Oct 2008
    Location
    Florida
    Posts
    559
    Keep a copy of the template in a txt file, then when you want to post it click the # symbol on the reply page and paste.
    Q9650

    2600k

  22. #4272
    Registered User
    Join Date
    Jan 2009
    Posts
    41
    Anyone know where I can get a hold of a rev 1.0 UD3P?
    Thanks
    Q9650 L836B361 1.225 VID
    Gigabyte EP45-UD3P Rev 1.1 f10e
    GTZ, MCR320, MCP355 w/XSPC Res Top
    G.Skill 9600 PIs
    XFX HD4890 CrossFire
    Corsair HX850
    Mountain Mods Pinnacle 24

  23. #4273
    Xtreme Member
    Join Date
    Jan 2007
    Posts
    291
    Been overclocking an EP45-UD3R, w/ a Q9550, w/ 1.25 VID.

    Before I go crazy, I'm going to stop @ 3.4; I got to 3.5 w/ some somewhat crazy numbers, but I just can't figure it out going above 3.5. Temps are not a problem, just stability in IDT, OCCt, Prime95. I read and tried alot of voltage settings. Oh well, truthfully, I only needed to go to 3.4 for gaming and every day use. I thin my 800 speed G.Skill ram held me up.



    .
    Rig #1:___Silverstone TJ09, GA-EP45-UD3R, Q9550, 4GB G.Skill, XFX HD 5870, Thermaltake 850W, Vista X64, ASUS 1920x1200 VW266H Black 25.5" 2ms(GTG) 1920x1200

    Rig #2:___Lian-Li PC-7 Plus II, P5K DLX (bios 1005), Q8400, 4 GB Crucial Ballistix, 8800GTS [640mb/G80], CORSAIR 620HX, Vista X64, Samsung SyncMaster 226BW 1680x1050

    Acer notebook & netbook, iPhone, & Touch, etc.
    .

  24. #4274
    Xtreme Cruncher
    Join Date
    Nov 2008
    Location
    NE Ohio, USA
    Posts
    1,568
    Have a temp issue I need help figuring out. I have a E7500 in a GA-EP45T-UD3LR running at 4 GHz (8x500FSB) and my CPU Temp reads about 10 degrees hotter under testing than my Core #1 and #2 temps do. For instance CPU=65c and Core 1/2=55c This is the case in both the newest version of Everest Ultimate, HWMonitor (Pro and free), and Speedfan. I know the E7x00 IHS are only glued not soldered so I'm not sure. Also, both my core temps only go down to 40c at idle, so evidently I have stuck sensors too, although my CPU temp will go down to 25c at idle. Should I be concerned?
    Last edited by bluestang; 08-19-2009 at 10:39 AM.
    Home PC -- 24/7 Cruncher #1
    GA-P67A-UD4-B3 BIOS F8 mod, 2600k (L051B138) @ 4.5 GHz, 1.260v full load, Arctic Liquid 120, (Boots Win7 @ 5.6 GHz per Massman binning)
    Samsung Green 2x4GB @2133 C10, 2x MSI 1660ti, Vertex 4 128GB, 2x3TB WD Red RAID1, BR Burner, Win7 Ult x64, Enthoo Pro, HX750

    Work PC -- 24/7 Cruncher #2 ... Crucial M225 64GB SSD Donated to Endurance Testing (Died at 968 TB of writes...no that is not a typo!)
    GA-EP45T-UD3LR BIOS F10 modded, Q6600 G0 VID 1.212 (L731B536), 3.6 GHz 9x400 @ 1.312v full load, Zerotherm Zen FZ120
    OCZ 2x2GB DDR3-1600MHz C7, Gigabyte 7950 @1200/1250, Crucial MX100 128GB, 2x1TB WD Red RAID1, Win7 Ent x64, Centurion 590, XFX PRO650W

    Music System
    SB Server->SB Touch w/Android Tablet as a remote->S/PDIF->Denon AVR-X3300W->JBL Studio Series Floorstanding Speakers


  25. #4275
    Registered User
    Join Date
    Jan 2006
    Posts
    58
    I can't go past 300 FSB, I refuse to lower my memory anymore and it doesn't even appear to help the OC any... I'm stuck at 3.9 for the time being... but I'm sure just like I was stuck at 3.64 before, some experimentation might cure this. As of right now though, I'm tempted to start toying with timings and other things. I can pull 22,800 in 3DMark 05, at the default test settings. Is this good, or bad (or about even for that matter)?

    This is at 3.9Ghz, DDR2-1000 (5-5-5-15) and a Core 216 at 734/1476/1161


    Anywhere, here are my settings:

    NB Strap (Latch) = 200 (only 200 strap works)
    Using 3.33C...

    FSB = 300
    PCI-E = 101

    Vcore = 1.45
    VTT = 1.1
    PLL = 1.45
    My REF voltages are close enough to 60% of VTT that's all i can recall.. +- about .010v

    MCH is 1.2, and the rest is stock.

    My Memory voltages are 2.080, and the rest of the associated voltages values are half of 2.080 so 1.040.

    Memory Timings are set to 5-5-5-15, everything else is auto (As tight as I can get them).

    That's probably spot on and it's the best I can recall while I'm here at work.

    People always reccomend "LATCH=Auto" which is the same as strap I assume, and ideally that should be setting it to something that I can select manually. The best of my understanding is that it would be 4.00C, which would put my memory at 1200, well above what it can run, so no, it can't run at that. Simple suggestions aren't solving an obviously complicated problem. I tried every strap last night, nothing works but 2.66C at 345 (and below), 3.33C at 300 (and below), and 4.00C at 280~ and below...

    I'd like to see something in the 3.9 area with 1120 memory and if I could only get 3.33C working that'd be possible but nooooooo... board and cpu don't like to place nice.

    Specifically, does anybody know what I can do to make some of these straps work higher up in the FSB ranges? 3.33C at 300 would be simply amazing and would bring my memory around to where it should be.

    Anything I haven't specified is at Auto. Tips, suggestions? Different bios? I'm running out of my own suggestions these days.

Page 171 of 298 FirstFirst ... 71121161168169170171172173174181221271 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •