vmod 88GT finished :D
hi guys, this is my first post in XS.
I write from Argentina and i like to show the work log of my vmod 88GT.
Regards!
pd: sry for my bad english
PC Setup:
Q6600 kent @3700 (462x8) 1,530
2x2GB Corsair Dominator PC2-8500 @ 1100mhz CL5 (2.15v)
Evga nforce 780i with vdroop
2X SATAII SEAGATE 500GB 7200.11
Msi nx8800GT 870@1003@2200 (1.5v) + Accelero S1
Dell E207WFP
ANTEC P180b - Zalman HP-600 Modular
Scythe Shuriken + MX2
Pics:
Final Screen
---> rDLx´s site <---
Nice.
=)
But why four resistors?
And I take the card has Qimonda GDDR3?
You were not supposed to see this.
2 trimmers are for the OCP mod, i get the info from techpower up's guide
and yep, the mems are qimonda = sux
anyway, i´m not sure about how to do the ovp mod... it wasn't clear from what i've read around
---> rDLx´s site <---
What resistance did you set those OCP VRs?
Btw, I don't think you'll need OVP. It seems these cards have a high voltage tolerance - I've benched at 1.65v without problems.
You were not supposed to see this.
Damn so in my mods i didn't see your mateTe quedo muy bueno yo soy de Montevideo Uruguay
very nice work !!
Cheers mate
Sergio
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Damn it dude
Using those connectors is an damn good idea!
You use IRC and Crunch in Xs WCG team? Join #xs.wcg @ Quakenet
Ze gear:[22:53:09] [@Jaco-XS] i'm gonna overclock this damn box!
Main rig: W3520 + 12GB ddr3 + Gigabyte X58A-UD3R rev2.0! + HD7970 + HD6350 DMS59 + HX520 + 2x X25-E 32gig R0 + Bunch of HDDs.
ESXI: Dell C6100 XS23-TY3 Node - 1x L5630 + 24GB ECC REG + Brocade 1020 10GbE
ZFS Server: Supermicro 826E1 + Supermicro X8DAH+-F + 1x L5630 + 24GB ECC REG + 10x 3TB HDDs + Brocade 1020 10GbE
Lappy!: Lenovo Thinkpad W500: T9600 + 8GB + FireGL v5700 + 128GB Samsung 830 + 320GB 2.5" in ze dvd slot + 1920x1200 @ 15.4"
thanks friends!
largon: trimmer fits it in 4.2k, which i help myself to pass 830mhz
of core, but i cant pass the 880mhz though adjust vgpu on 1,6v...
my challenge is to pass the 17k in 3dmk06
regards! Salu2!
---> rDLx´s site <---
Nice results. I wouldn't have used the hot glue though, there's more chance of pulling a resistor off if you bump it against something.
very nice score
hey dude , is that voltage safe to be used for 24/7 on f@h ?
I cant push more to my 88gt unless vmod it
0168257061 a.k.a YongJK/JK/016 (just call me Jk/016 as my name
thx dude
This voltage is safe. For the present it gave to me problems neither with the stability nor with the temperature.
If i was increasing a bit the frequency of the Q6600, maybe pass 17k points
pd:my english u sux
---> rDLx´s site <---
wow! nice mod! nice webpage too! to bad I dont speak spanish
Also did the vgpu and vmem reverse mod some days ago, not as perfect as yours, but working
I used a 100k VR tuned for 50K for the vmem reverse mod
Posting Permissions
Reply With Quote
Bookmarks