Foxconn Renaissance X58 Digital Life -Retail- (Core i7, Nehalem)

**G H Z** · 10-06-2008, 02:26 PM

Originally Posted by SF3D

I have some good news for you guys!

The price of this motherboard will be around 250 USD. (185€)

Excellent, price is where BO failed imo

**DMH** · 10-06-2008, 02:27 PM

Originally Posted by G H Z

Excellent, price is where BO failed imo

Well this board is not a Quantum Force board

**saaya** · 10-06-2008, 05:33 PM

Originally Posted by MomijiTMO

Actually I like purple and green but I think I'm that 0.002%

. I want good Bloodrage images before I RAGE!!!.

Question for those in the know. Does the mobo come with a small fan to go on the nb or is that an aftermarket item? If you had a perfect size fan ..... cool

hahah, no, it doesnt come bundled, thats the fan that comes bundled with the blackops

Originally Posted by HDCHOPPER

thanks for the BloodRage pic saaya !
must have water nb

your welcome ^^

Originally Posted by Slovnaft

Because I theoretically can already blow some pounds sterling on a full nehalem rig at OCUK!
This release is getting soddamn close!

yeh, i saw it

BloodRage wont be out right after launch, just like the Rampage Extreme 2 it will come a bit later...

Originally Posted by zads27

Yes indeed.

Wintec Industries has been sitting on (not releasing) a 1GB DDR3-1800 CL9 1.5V product for a few months now..

We haven't seen there being enough demand for this product in the dual-channel enthusiast market,
so we're probably just gonna wait to launch this product and make it a tri-channel kit, synchronized with the Nehalem release date.

well we will see... if the memory controllers really degrade with more than 1.65v after some time then there will be big demand for this memory, but if its fixed now and vdimm of up to 2v and more is ok, then nobody will care about low voltage memory in the desktop segment i think...

Originally Posted by DMH

Tony said that Nehalem needs less voltage for the same ram speeds so maybe today kit's need 1,8V with C2D,with Corei7 they will need only 1,6V.
Also A-DATA will start to sell 3GB and 6GB kits with 1,65V-1,75V from factory

yes, you need less vdimm for the same speed

Originally Posted by pajaa

If you use Intel Gbe- and other high quality chips on the Blood Rage, it's almost bought, nevermind the price, it's enthusiat.

too expensive... well not THAT expensive, but they do cost quite a bit more than any other NIC and they dont really bring any advantage...

**~~MomijiTMO~~** · 10-06-2008, 10:25 PM

Oh well a fan is like what? $10 max? Who cares

Thanks for the screenie too.

**T_M** · 10-07-2008, 01:14 AM

Thanks for this excellent info sasha

**Benny Lodewijk** · 10-07-2008, 02:55 AM

Thanks for the info SF3D and Saaya... this board looking great and the price info is really interesting

**saaya** · 10-07-2008, 07:03 PM

Originally Posted by T_M

Thanks for this excellent info sasha

your welcome

if you guys have any more questions about nehalem let me know

Originally Posted by Benny Lodewijk

Thanks for the info SF3D and Saaya... this board looking great and the price info is really interesting

your welcome man

like i said, if you have any questions just ask

**T_M** · 10-07-2008, 07:37 PM

unfortunately i dont seem to be getting any X58 loving, so have to rely on your real extreme world usage reports till November

**M.Beier** · 10-08-2008, 02:10 PM

Originally Posted by SF3D

Well, the QF Bloodrage will be a bit more expensive. It's not only the Foxconn motherboards..I think all vendors have their "too" expensive boards out there.

Too bad. Well, just hang on.. we will do our best to satisfy your needs (with screenshots)

Here is another low clock, aircooled and untweaked 32M run in vista. You can try to guess the frequency. I can't tell it

Attachment 86554

you just broke my dream

I wanna see sub 5min with nehalem

its been toooo long, now we need horsepowers!

**rgkpt** · 10-08-2008, 03:10 PM

nice board...

**ZoLKoRn** · 10-09-2008, 04:05 AM

looking good for Nehalem horsepowers and i think it run about 4GHz ?

btw. wanna to try on this board

**ryba** · 10-09-2008, 04:22 AM

hmm I think SF3D make it with 21x200

16M with good memory performence - 4:19.078

3.85GHz, Triple Channel 1600 7-7-7-20

PS. Wolfdale must have almost 5GHz with higher mem freq. to make that

**saaya** · 10-09-2008, 04:28 AM

Originally Posted by SF3D

Well, the QF Bloodrage will be a bit more expensive. It's not only the Foxconn motherboards..I think all vendors have their "too" expensive boards out there.

well... look at it that way, people complain about boards for 400USD but they buy a set of 400USD videocards and a 1000USD cpu... i dont know why, but people expect boards to be cheap for some reason... me too actually, i figured mainboard makers are cashing in big time on high end boards, but actually they dont... there isnt a lot of margin with high end boards, i was quite surprised...

Originally Posted by SF3D

Too bad. Well, just hang on.. we will do our best to satisfy your needs (with screenshots)

you are linking him to the GOOC babe galleries?

Originally Posted by ZoLKoRn

looking good for Nehalem horsepowers and i think it run about 4GHz ?

**Chri$ch** · 10-09-2008, 04:36 AM

Originally Posted by ryba

hmm I think SF3D make it with 21x200

For 4.2Ghz is it to slow!

i think it is 3.8Ghz (19x200)...

i have seen a 4Ghz i7-920 (20x200) which does it in 10min 2secs. (without tweaks)

**SF3D** · 10-09-2008, 04:41 AM

Originally Posted by ryba

hmm I think SF3D make it with 21x200

Haha...your guess was really high

This is very powerful setup and fast board. I have to test XP next week and try the same settings. I think sub 10min is possible without too much effort.

Originally Posted by ZoLKoRn

looking good for Nehalem horsepowers and i think it run about 4GHz ?

No

Originally Posted by saaya

well... look at it that way, people complain about boards for 400USD but they buy a set of 400USD videocards and a 1000USD cpu... i dont know why, but people expect boards to be cheap for some reason... me too actually, i figured mainboard makers are cashing in big time on high end boards, but actually they dont... there isnt a lot of margin with high end boards, i was quite surprised..

No need to teach me dude

I have never complained about the prices. You have to pay if you want to play

**Catz** · 10-09-2008, 05:10 AM

Bloodrage photoshop for anyone interested

**JPQY** · 10-09-2008, 05:59 AM

Just run my test and i will know it SF3D

http://www.xtremesystems.org/forums/...d.php?t=202139

JP.

**ZoLKoRn** · 10-09-2008, 06:32 AM

Waaaa it wrong !!!

**SF3D** · 10-09-2008, 06:55 AM

Originally Posted by JPQY

Just run my test and i will know it SF3D

http://www.xtremesystems.org/forums/...d.php?t=202139

JP.

No. You have to wait

**kaskuli** · 10-09-2008, 07:02 AM

X58, Is the BlackOps in alpha testing yet?

**Catz** · 10-09-2008, 07:20 AM

Originally Posted by kaskuli

X58, Is the BlackOps in alpha testing yet?

I think you are confused... X58 Bloodrage is the name for the new quantum force motherboard. The X48 BlackOps has been on the market now for quite a while

**kaskuli** · 10-09-2008, 08:22 AM

eh? Being on the market doesn't...argh, never mind.

**SF3D** · 10-09-2008, 08:34 AM

Originally Posted by kaskuli

X58, Is the BlackOps in alpha testing yet?

Originally Posted by kaskuli

eh? Being on the market doesn't...argh, never mind.

Sarcasm is the most intelligent class of humor, but you fail on this one

Or I didn't get it

**DMH** · 10-09-2008, 09:23 AM

Originally Posted by SF3D

Sarcasm is the most intelligent class of humor, but you fail on this one

Or I didn't get it

He probably wasn't able to get a BlackOPS or his was buggy

**Catz** · 10-09-2008, 10:50 AM

Daaaamn.. that must have been one of the lamest tries at being sarcastic.... well... EVER?

Thread: Foxconn Renaissance X58 Digital Life -Retail- (Core i7, Nehalem)

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions