EP45-UD3P Benches 3D at 670mhz+ FSB

[Harshal]

45K straight... You on a roll Thomas!!
Awaiting full fledged run with a killer R8600 chip

[hicookie]

45K straight... You on a roll Thomas!!
Awaiting full fledged run with a killer R8600 chip

that's what i said, i don't have E8600 right now, wait you guys to push
ur own E8600 to the limits,

thoms and benny, nice 1m performance run

[Slovnaft]

1min OCCT , my cpu doesnt like more ^^ , cpu temp stopped occt because >70°c under intel stock cooler.

Is that with LLC? even sheit analogue phases look great with llc.

[hicookie]

Is that with LLC? even sheit analogue phases look great with llc.

analogue performance well
just for all mobo makers, "sometimes" they need to follow intel's vdrooping
guide line, UD3 line already add vdrooping calibration ,now u can be more flexiable with overclocking or follow intel's vdrooping guide line.

[Slovnaft]

analogue performance well
just for all mobo makers, "sometimes" they need to follow intel's vdrooping
guide line, UD3 line already add vdrooping calibration ,now u can be more flexiable with overclocking or follow intel's vdrooping guide line.

I'm not sure what you mean there, but what i wanted to see was the native vdroop of this board without LLC, because even a board with poor power distro design can look stiff with LLC enabled.

[hicookie]

I'm not sure what you mean there, but what i wanted to see was the native vdroop of this board without LLC, because even a board with poor power distro design can look stiff with LLC enabled.

if u consider the native loadline, suggest u can test with different mobo and
same psu, btw, even the native loadine just decided by those engineers choose what resistors. if u worry about the curve, even with LLC, u can see
the picture from thomas, the curve is looking good.

[eiceman]

any test about Quadcore? and more picture about bios ?

[Slovnaft]

if u consider the native loadline, suggest u can test with different mobo and
same psu, btw, even the native loadine just decided by those engineers choose what resistors. if u worry about the curve, even with LLC, u can see
the picture from thomas, the curve is looking good.

ohh hohoh, native LLC ok gotcha. thanks.

[bigslappy]

WoW ...that's a Sweet MoBo !

[RPGWiZaRD]

Very fast super pi 1M @ 4ghz

WTF, 11,296s with PL9? This board is really efficient, among the fastest PI times and prolly fastest for Gigabyte at this config I've seen for 500x8 and DDR2-1200. I don't even get that with PL8 on my P35-DS4.

If I upgrade mobo Gigabyte it is, might wait and see if they release some DS4 variant with 2oz.

[Pt1t]

ohh hohoh, native LLC ok gotcha. thanks.

~1hour OCCT stability test. Vcore no drop

[dinos22]

try a quad with 1.5vcore and high MHz

but yeah i think this board will handle anything you throw at it
hehehe

wish mine could be here so that i can use this left over LN2 hheheheh

[Pt1t]

try a quad with 1.5vcore and high MHz

but yeah i think this board will handle anything you throw at it
hehehe

wish mine could be here so that i can use this left over LN2 hheheheh

, I Cant put 1.5v to my E8600 in air. It needs only 1.26v for 4.5ghz and 80° full loaded. I will try a QX.

[M3kk]

And what is the vcore @ idle?

[Pt1t]

And what is the vcore @ idle?

Same ,with occt 1h test first and last minutes are idle.

I added temperature graph.

[road-runner]

I ordered one yesterday, will see how it does with a quad...

[M3kk]

Same ,with occt 1h test first and last minutes are idle.

I added temperature graph.

And the same value ( set ) in bios too? :P

[Pt1t]

And the same value ( set ) in bios too? :P

no , set 1.2v for 1.17v , 1.17v real and also 1.17v under cpuz. But if you know that bios set = real vcore -0.03v it isnt a problem.

[RPGWiZaRD]

What voltage regulation setup are these boards using, is it 6 power phase perhaps? 8 is the lowest I want that IMO ensures stable OC.

EDIT: Looks like 6-phase. Hmm, might wait for some "DS4" variant.

[hicookie]

What voltage regulation setup are these boards using, is it 6 power phase perhaps? 8 is the lowest I want that IMO ensures stable OC.

EDIT: Looks like 6-phase. Hmm, might wait for some "DS4" variant.

where u hear that? , cal 6 phases, 30a per phase then u have 180a for processor,
isn't that enough for all model of processor?

[Pt1t]

quick test of vcore stability with and quad core.

[Solid Snake]

exellent oc !!!!

i have my new EP45 UD3P

loading.....

[SimpleTECH]

Looks like a board to get! Just wish I had the money at the time when Newegg was offering free shipping on this board. Until next time.

[Flinch]

exellent oc !!!!

i have my new EP45 UD3P

loading.....

I placed my order for this Saturday, so I'm eagerly awaiting quad results.

[Exedy]

Pt1t...500FSB with no tweaking in voltages right?

And also the only difference between UD3P and R is the additional PCIex16/x8 ?

Nice results