Skittles Build .. feel the rainbow ?
Skittles Build .. feel the rainbow ?
MagisD
____________________________
Lurker, Dreamer, Planner, Noob
6 Quad rads 1 case Maybe I went a little overboard....Overkill Cube
It would look awesome, but mostly on the 24-pin wire.
I think I'll just stick with black, red and white.
PC: Case: Zalman Z-Machine GT-1000 Black Brushed Alu - Screen: HP W2408H - Mobo: DFI Lanparty DK P45-T2RS PLUS - CPU: Intel C2Q Q9550 - Ram: Corsair Dominator 8GB PC2-8500 - GPU: MSI 460GTX OC 'Cyclone' - Sound: Asus Xonar D2X + Onkyo HT-S5105 5.1 set
Cooling Thermolab Baram + 2x tacens Ventus ice - Storage: OCZ Vertex 60GB, WD Caviar Black 1TB, WD Green 3TB - PSU: Corsair HX520 - Peripherals: Duck Orion TKL (MX Clears) + Roccat Kova mouse
Thanks guille
Regards,
Martin Simpson
Crys1s_Gam3r, your pictures are a work of art
Is it just me, or when I visit the murdermod site, it gives me saying they are out of business, and when I finally enter the site, the sleeves are all out of stock . I would order from MDPC-X, but the shipping, and the currency transfer fees.
Project Elegant Dreams
CPU: Intel 980x (3005F803T) @ Stock , Mobo: Rampage III Extreme, Ram: 24GB Corsair Vengeance 1600 C9 1T 1.51v GPU: SLI EK'd Vanilla GTX580, 0.875v @ idle.
Sound:Asus Xonar Xense w/Sennheiser PC350
SSD: 2x OCZ Agility 3 120GB RAID-0 on ICH10 Storage: 2x1.5TB Hitachi 5K3000, 1.5TB WD Black, 1TB F3, various other HDD's Case: Obsidian 800D, PSU: Corsair AX1200,
Water Cooling
Main Loop
EK Supreme HF
EK GTX480 blocks on EVGA 580s
MCP355 and MCP35X in serial
Dual BlackIce GTX480 Rads
Quick question before i place my large order for wire and connectors.. At the place i'm gona order wires they sell only 18-26 gauge wire.. Now i've noticed on the P/S ATX connector they use alot of 16 ga mainly. Dont know if 16 is needed but will order it from another site if need be.. but before i do the question i have, will i beable to fit the heatshrink in the atx connector around the wire if i use 16 ga wire insted of 18???
Running now, http://www.evga.com/forums/tm.aspx?m=693435
Intel 3960 @ 5Ghz
Asus Rampage IV Extreme
QuadFire 7970
X-Fi Sound Card
16GB G.Skill 2133Mhz DDR3 Quad Channel Ram 9,11,10 @ 1.65v.
3 Acer 23" 3D Ready LCDs
2x Ultra X4 1600 WATT P/S 's
MM Extension Ascention UFO Case W/ Top of the line Water cooling. Dream build!
Great pictures, but maybe just a bit more aperture to get more in focus?
ASUS Sabertooth P67B3· nVidia GTX580 1536MB PhysX · Intel Core i7 2600K 4.5GHz · Corsair TX850W · Creative X-Fi Titanium Fatal1ty
8GB GSKill Sniper PC3-16000 7-8-7 · OCZ Agility3 SSD 240GB + Intel 320 SSD 160GB + Samsung F3 2TB + WD 640AAKS 640GB · Corsair 650D · DELL U2711 27"
Just a guess but maybe he doesn't have a proper macro lense and is doing something like using a reversing ring?
When I used to use a 35mm prime and Nikon BR-2A reversing ring my macro shots all looked like that.
has anyone come up with a solution for sleeving the antec TPQ1200 with its powercache caps? the stock "sleeve"(if you can even call it that) is utter crap.
is it anything like this?
http://www.xtremesystems.org/forums/...&postcount=607
I have got a question,
are there any difference in the content of the yellow and black cables after i taken them out from the pcie heads? Meaning, i can just use any colour cables as long they are fitted back correctly? Sounds a little confusing >.>
System: a little entertainment...™
I believe the Yellow are your hot lines ( I think they are 12v, in PCIe) and black is your ground.... you can use any wire as long as it is the identical colour....
so all the black wires can be switched to go any place a black wire was.... and any yellow wire can go into a hole where a yellow wire was....
Hope that made sense and gave you a bit of understanding of how things work
i7 920 D0 @ 4.01ghz 1.25v
Rampage III Extreme
24gb Corsair Vengeance @ 1600mhz 8-8-8-24-1T
eVGA GTX 1070 Founders Edition
Silverstone 1000w
Corsair 800D
Liquid Cooled - CPU/MB - EKWB Supreme HF/Full Cover MBWB, Iandh 225 res, D5 w/XTOP rev. 2, Feser x-changer 360, Bitspower fittings
http://www.jonnyguru.com/modules/NDR...0/DSCF2095.JPG
no... they have capacitors inline on the pcie and cpu power cables. you cant remove them or the psu performs like crap.
i7 920 D0 @ 4.01ghz 1.25v
Rampage III Extreme
24gb Corsair Vengeance @ 1600mhz 8-8-8-24-1T
eVGA GTX 1070 Founders Edition
Silverstone 1000w
Corsair 800D
Liquid Cooled - CPU/MB - EKWB Supreme HF/Full Cover MBWB, Iandh 225 res, D5 w/XTOP rev. 2, Feser x-changer 360, Bitspower fittings
ha! i see. I already drew up all the position where the 24pins should go in my X650.
guess i can just take out every single one of them and sleeve it up without worrying which colour is which
EDIT: I found out i have a particularly thin red wire. Does it have to put back to the same original position or anywhere as long its in the same colour group position?
System: a little entertainment...™
@Crys1s_Gam3r:
On your site: http://psychosleeve.com/order.html
It says $2.50 a wire...so if I wanted my power supply custom sleeved, would I ship it to you or would you just buy it yourself, and pay you for the price of the unit + sleeving + S&H? Do you sleeve anything or just PSU's?
Thx in advance
People need some help here.
Since that you're more PRO than i in this stuff i recently buy some atx, pci-e extensions already sleeved in black.
Well, i have a Corsair TX750W which have AWG 18 wires.
My atx and pci-e extensions have AWG 18 wires too but when i compared with my Corsair wires, my extensions wires is a little more thinner than Corsair with the same rated (AWG 18).
I believe that my extensions wires is likely AWG 20 because it's the same wires then we could find in some cheapers 400w PSu.
Did i have some kind of problem to use that?
PS: I don't wanna sleeve the Corsair PSU because in the future i can always change the PSU and keep my extensions with good look.
Last edited by G40RoCkEt; 09-18-2010 at 03:12 PM.
______________________________
Banchetto 101 | Corsair TX850W V2 | ASUS P5W DH Deluxe | E8600 @ Noctua NH-U12F | 4GB OCZ DDR2 800 OPS Edition | EVGA GTX280 | HP w2408h | SB X-Fi Xtreme Gamer Fatal1ty | Genius Home Theater 5.1 | PLextor PX-820SA | LiTe-ON LH-20A1S | OCZ RevoDrive 120GB | WD 500GB AAKS | WD 2TB GP 64MB EARX | UPS APC Back-Up RS 1500VA LCD | W7 x64 & sOnY VaIO i3 2.2GHz # 8GB
Thanks dctokyo
wraithien: I used MDPC-X SATA sleeve and heatshrink, and I believe some BIG heatshrink as well (comes with tubing-pack), for that 6pin
Shawnoen: Almost I use a macro extension tube with my 50mm 1.4
Baron Davis: Either way, whichever is most convenient for you. Email me at martin@psychosleeve.com to discuss further.
Regards,
Martin Simpson
Sounds good Baron
Kenjiwing!
Regards,
Martin Simpson
Does anyone here from the USA have any of the Yellow MDPC small sleeving left over that they don't need? I only need about 8 to 10 feet of it which is way to little to order direct from Nils.
Bookmarks