Page 5 of 95 FirstFirst ... 23456781555 ... LastLast
Results 101 to 125 of 2366

Thread: Micron D9 GMH\GKX\JKH etc club

  1. #101
    Champion
    Join Date
    Jan 2007
    Location
    Romania, lab501.ro
    Posts
    1,710
    I like Micron D9GMH, when they are binned properly (like in Crucial Ram kits) the results can be astonishing. I played a little with my 2 kits with GMH, you can see the results in my sig
    Weissbier - breakfast of champions



  2. #102
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,000
    That's some incredible speed, what board were you using?

    I've had very similar results with my GMH & GKX kits, in fact my CellShock GKX kit is a little better than my TG GMH kit, but I haven't pushed them anywhere near as hard as you.

    EDIT - just saw valid - you did that on a P965 commando? Wow, my old P5B would never go over ~680 with my Corsair D9's What vNB did that require?
    Last edited by CryptiK; 09-25-2008 at 06:53 AM.
    Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
    Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X

  3. #103
    Xtreme Enthusiast
    Join Date
    Jun 2008
    Location
    Earth
    Posts
    644
    Quote Originally Posted by CryptiK View Post
    Yeah I suppose so, hope your new cpu allows you to have some ram oriented fun. Thanks for doing the CL 4 vs CL 5 test, as I suspected, there is very little difference. It must be a P45 quirk as I have not seen any of them do much better on CL 4 vs CL 5 which is a little irritating.

    Just did this with my TG GMH @ 2.24v This board isn't too bad now I've figured it out.

    Awesome man! Seeing these kind of results tempts me to pump some more voltage through my kit. I know it can do 1300 (1302 is the highest I've taken it on 2.1v which wasn't stable) but because I don't have active cooling I'm kinda scared of killing it. There's no way I can afford another kit right now if anything bad happens! As a guess, I think it'd take at least 2.2v to get it stable, but with this kind of voltage, active cooling is a must, right? I'm not sure it's worth the extra noise from a fan. On the other hand, knowing there is significantly more performance which isn't being used, it's getting hard to resist.

    I could lower the CPU overclock a little and get the RAM to 12xx easily. DDR1200 will finish Pi 32M on only 1.9v set in BIOS. It's probably not worth losing the clock frequency for a little extra MHz on the RAM, though.

    What to do...

  4. #104
    Xtreme Enthusiast
    Join Date
    Jun 2008
    Location
    Earth
    Posts
    644
    Quote Originally Posted by Monstru View Post
    I like Micron D9GMH, when they are binned properly (like in Crucial Ram kits) the results can be astonishing. I played a little with my 2 kits with GMH, you can see the results in my sig
    Damn!

  5. #105
    Xtreme Addict
    Join Date
    Feb 2008
    Location
    Russia
    Posts
    1,903
    Guys. I have a problem. I can pass Memtest86+ the whole night with no errors. I can pass IntelBurnTest using all available memory the whole night. I can pass Prime95 and OCCT with no errors. BUT! I have errors when using Memtest in Windows !
    Help me, guys!
    Last edited by WaterFlex; 09-25-2008 at 07:03 AM.

    Intel Q9650 @500x9MHz/1,3V
    Asus Maximus II Formula @Performance Level=7
    OCZ OCZ2B1200LV4GK 4x2GB @1200MHz/5-5-5-15/1,8V
    OCZ SSD Vertex 3 120Gb
    Seagate RAID0 2x ST1000DM003
    XFX HD7970 3GB @1111MHz
    Thermaltake Xaser VI BWS
    Seasonic Platinum SS-1000XP
    M-Audio Audiophile 192
    LG W2486L
    Liquid Cooling System :
    ThermoChill PA120.3 + Coolgate 4x120
    Swiftech Apogee XT, Swiftech MCW-NBMAX Northbridge
    Watercool HeatKiller GPU-X3 79X0 Ni-Bl + HeatKiller GPU Backplate 79X0
    Laing 12V DDC-1Plus with XSPC Laing DDC Reservoir Top
    3x Scythe S-FLEX "F", 4x Scythe Gentle Typhoon "15", Scythe Kaze Master Ace 5,25''

    Apple MacBook Pro 17` Early 2011:
    CPU: Sandy Bridge Intel Core i7 2720QM
    RAM: Crucial 2x4GB DDR3 1333
    SSD: Samsung 840 Pro 256 GB SSD
    HDD: ADATA Nobility NH13 1GB White
    OS: Mac OS X Mavericks

  6. #106
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,000
    @ Dee - You do need some active cooling, even when running 1.9 - 2.0v I use it. You don't want to risk hurting your ram. I have 2 x 80mm fans running at 70% duty cycle and they are no louder than the 120mm fans I have for cpu (each running ~1300rpm) & case and the 140mm blowhole fan on low (~1000rpm).

    I have to re-do the fans for the ram though they are too far away and are supported by cable ties as I've been swapping ram in & out a lot recently.
    Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
    Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X

  7. #107
    Xtreme Enthusiast
    Join Date
    Jun 2008
    Location
    Earth
    Posts
    644
    Quote Originally Posted by WaterFlex View Post
    Guys. I have a problem. I can pass Memset86+ the whole night with no errors. I can pass IntelBurnTest using all available memory the whole night. I can pass Prime95 and OCCT with no errors. BUT! I have errors when using Memtest in Windows !
    Help me, guys!
    That's strange behaviour. I wouldn't worry about Windows MemTest too much if you're stable in everything else.

  8. #108
    Xtreme Enthusiast
    Join Date
    Jun 2008
    Location
    Earth
    Posts
    644
    Quote Originally Posted by CryptiK View Post
    You do need some active cooling, even when running 1.9 - 2.0v I use it. I have 2 x 80mm fans running at 70% duty cycle and they are no louder than the 120mm fans I have for cpu (each running ~1300rpm) & case and the 140mm blowhole fan on low (~1000rpm).

    I have to re-do the fans for the ram though they are too far away and are supported by cable ties as I've been swapping ram in & out a lot recently.
    OK, I'ma rig a fan up in a sec. My sticks are running nice and cool, though.

    EDIT: Just remembered I have a ton of old 80mm's and a few low noise adapters. It'll probably not be very loud after all.

  9. #109
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,000
    Quote Originally Posted by WaterFlex View Post
    Guys. I have a problem. I can pass Memtest86+ the whole night with no errors. I can pass IntelBurnTest using all available memory the whole night. I can pass Prime95 and OCCT with no errors. BUT! I have errors when using Memtest in Windows !
    Help me, guys!
    Weird. The other apps stress ram a lot more than Memtest in windows. Have you tried upping the vdimm one or two notches, or bumping up the vNB or vcore to see if it makes any difference?

    Quote Originally Posted by Dee View Post
    OK, I'ma rig a fan up in a sec. My sticks are running nice and cool, though.

    EDIT: Just remembered I have a ton of old 80mm's and a few low noise adapters. It'll probably not be very loud after all.
    That sounds like a plan, two 80mm fans at 5v should be fine and keep them cool. Unless of course you go into the 2.3 - 2.5v area for benching, then I'd recommend running the fans at full speed.
    Last edited by CryptiK; 09-25-2008 at 07:07 AM.
    Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
    Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X

  10. #110
    I am Xtreme Ket's Avatar
    Join Date
    Apr 2004
    Location
    United Kingdom
    Posts
    6,806
    I can officially say any D9 ICs you DON'T need active cooling for up to 2.1v as the ICs won't get that warm even under heavy load, you could even skate along with 2.2v and be ok. I would advise that active cooling is used though with voltages beyond 2.1v.

    "Prowler"
    Asrock Z77 Extreme6 | i5 3570k @ 4.5GHz 1.18v | 2x4GB PC12800 Ripjaws @ 1866MHz 10-10-10-15 1T 1.55v | Gigabyte GTX980, custom cooler @ 1.5GHz / 7.6GHz | Xonar DX 7.1 | 2TB Barracuda | 2x Sony Optiarc | Corsair 850w HX

    Cooling:

    3x Coolermaster Sickleflow 120mm 70CFM fans | Modified CoolIT ECO sealed loop CPU cooler | Custom made "The Judge" VGA VRM heatsink

    Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread

    (\_/) This is Bunny.
    (+.+) Bunny is dead.
    (^ ^) Copy and paste Bunny into your sig to create an army of BUNNY ZOMBIE MINIONS!!!

  11. #111
    Champion
    Join Date
    Jan 2007
    Location
    Romania, lab501.ro
    Posts
    1,710
    Quote Originally Posted by CryptiK View Post
    That's some incredible speed, what board were you using?

    I've had very similar results with my GMH & GKX kits, in fact my CellShock GKX kit is a little better than my TG GMH kit, but I haven't pushed them anywhere near as hard as you.

    EDIT - just saw valid - you did that on a P965 commando? Wow, my old P5B would never go over ~680 with my Corsair D9's What vNB did that require?
    The CAS4 was done with Asus Commando, not bad for a chipset 2,5 years old, no? The voltage was pretty high, in the 1.7-1.8 area.

    The CAS5 was done on Biostar TPower I45, because the Commando would not go above 690MHz, not even in CAS 5.
    Weissbier - breakfast of champions



  12. #112
    Dave's Mentor!
    Join Date
    May 2007
    Location
    montreal
    Posts
    5,217
    Quote Originally Posted by Ket View Post
    I can officially say any D9 ICs you DON'T need active cooling for up to 2.1v as the ICs won't get that warm even under heavy load, you could even skate along with 2.2v and be ok. I would advise that active cooling is used though with voltages beyond 2.1v.
    every set is different
    most of mine get average temp of 26c with 2 90mm fans
    i got a set of d9gkx that is 29c with 2 fans 2.1v
    not everyone has a lasergun to measure temps they better off with a fan no matter what the volts

    maximus IV extreme gtx580
    gigabut p67-ud7
    p67 sabertooth
    2500k+2600k
    antec 1200watt
    EVGA classified 760
    920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
    OCZ3RPR1866LV6GK hypers
    dfi ut p35 rampage extreme
    gigabut p35c-ds3r bios suks
    gigabut x38-d6q dead thank god
    ballistix 8500 1240mhz@2.02v

  13. #113
    I am Xtreme Ket's Avatar
    Join Date
    Apr 2004
    Location
    United Kingdom
    Posts
    6,806
    Theres no point in adding something that isn't needed or simply won't increase any threshold. Fans for memory are only beneficial once ICs start to feel quite warm.

    "Prowler"
    Asrock Z77 Extreme6 | i5 3570k @ 4.5GHz 1.18v | 2x4GB PC12800 Ripjaws @ 1866MHz 10-10-10-15 1T 1.55v | Gigabyte GTX980, custom cooler @ 1.5GHz / 7.6GHz | Xonar DX 7.1 | 2TB Barracuda | 2x Sony Optiarc | Corsair 850w HX

    Cooling:

    3x Coolermaster Sickleflow 120mm 70CFM fans | Modified CoolIT ECO sealed loop CPU cooler | Custom made "The Judge" VGA VRM heatsink

    Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread

    (\_/) This is Bunny.
    (+.+) Bunny is dead.
    (^ ^) Copy and paste Bunny into your sig to create an army of BUNNY ZOMBIE MINIONS!!!

  14. #114
    Champion
    Join Date
    Jan 2007
    Location
    Romania, lab501.ro
    Posts
    1,710
    I played a little bit more with my beloved GMH, you can see the thread here
    Weissbier - breakfast of champions



  15. #115
    Xtreme Enthusiast
    Join Date
    Jun 2008
    Location
    Earth
    Posts
    644
    Quote Originally Posted by Monstru View Post
    I played a little bit more with my beloved GMH, you can see the thread here
    Arrgh! Sick!

    God bless Crucial.

  16. #116
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,000
    500 FSB, 625 MHz


    530 FSB, 635.7 MHz
    Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
    Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X

  17. #117
    I am Xtreme Ket's Avatar
    Join Date
    Apr 2004
    Location
    United Kingdom
    Posts
    6,806
    You lie! Its not 530 FSB its 529.8!

    "Prowler"
    Asrock Z77 Extreme6 | i5 3570k @ 4.5GHz 1.18v | 2x4GB PC12800 Ripjaws @ 1866MHz 10-10-10-15 1T 1.55v | Gigabyte GTX980, custom cooler @ 1.5GHz / 7.6GHz | Xonar DX 7.1 | 2TB Barracuda | 2x Sony Optiarc | Corsair 850w HX

    Cooling:

    3x Coolermaster Sickleflow 120mm 70CFM fans | Modified CoolIT ECO sealed loop CPU cooler | Custom made "The Judge" VGA VRM heatsink

    Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread

    (\_/) This is Bunny.
    (+.+) Bunny is dead.
    (^ ^) Copy and paste Bunny into your sig to create an army of BUNNY ZOMBIE MINIONS!!!

  18. #118
    Xtreme Addict
    Join Date
    Feb 2008
    Location
    Russia
    Posts
    1,903
    Guys... I can`t solve a problem which i described upper... I am being depressed...
    Can you pass Memtest in Windows?


    Intel Q9650 @500x9MHz/1,3V
    Asus Maximus II Formula @Performance Level=7
    OCZ OCZ2B1200LV4GK 4x2GB @1200MHz/5-5-5-15/1,8V
    OCZ SSD Vertex 3 120Gb
    Seagate RAID0 2x ST1000DM003
    XFX HD7970 3GB @1111MHz
    Thermaltake Xaser VI BWS
    Seasonic Platinum SS-1000XP
    M-Audio Audiophile 192
    LG W2486L
    Liquid Cooling System :
    ThermoChill PA120.3 + Coolgate 4x120
    Swiftech Apogee XT, Swiftech MCW-NBMAX Northbridge
    Watercool HeatKiller GPU-X3 79X0 Ni-Bl + HeatKiller GPU Backplate 79X0
    Laing 12V DDC-1Plus with XSPC Laing DDC Reservoir Top
    3x Scythe S-FLEX "F", 4x Scythe Gentle Typhoon "15", Scythe Kaze Master Ace 5,25''

    Apple MacBook Pro 17` Early 2011:
    CPU: Sandy Bridge Intel Core i7 2720QM
    RAM: Crucial 2x4GB DDR3 1333
    SSD: Samsung 840 Pro 256 GB SSD
    HDD: ADATA Nobility NH13 1GB White
    OS: Mac OS X Mavericks

  19. #119
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,000
    Quote Originally Posted by Ket View Post
    You lie! Its not 530 FSB its 529.8!
    oops lol missed that

    Quote Originally Posted by WaterFlex View Post
    Guys... I can`t solve a problem which i described upper... I am being depressed...
    Can you pass Memtest in Windows?

    Don't get depressed, did you try with more voltage on ram, vNB and cpu like I suggested? If so what was the result?

    I have not tried to run it TBH I use Memtest in bootable CD form, Orthos, Linpack, and gaming to test system stability, so i cannot say whether or not I pass.
    Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
    Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X

  20. #120
    Xtreme Addict
    Join Date
    Feb 2008
    Location
    Russia
    Posts
    1,903
    Yes, I tried like you suggested...unfortunately, no improvements...still 2-4 errors after 100 coverage.
    Last edited by WaterFlex; 09-26-2008 at 04:22 AM.

    Intel Q9650 @500x9MHz/1,3V
    Asus Maximus II Formula @Performance Level=7
    OCZ OCZ2B1200LV4GK 4x2GB @1200MHz/5-5-5-15/1,8V
    OCZ SSD Vertex 3 120Gb
    Seagate RAID0 2x ST1000DM003
    XFX HD7970 3GB @1111MHz
    Thermaltake Xaser VI BWS
    Seasonic Platinum SS-1000XP
    M-Audio Audiophile 192
    LG W2486L
    Liquid Cooling System :
    ThermoChill PA120.3 + Coolgate 4x120
    Swiftech Apogee XT, Swiftech MCW-NBMAX Northbridge
    Watercool HeatKiller GPU-X3 79X0 Ni-Bl + HeatKiller GPU Backplate 79X0
    Laing 12V DDC-1Plus with XSPC Laing DDC Reservoir Top
    3x Scythe S-FLEX "F", 4x Scythe Gentle Typhoon "15", Scythe Kaze Master Ace 5,25''

    Apple MacBook Pro 17` Early 2011:
    CPU: Sandy Bridge Intel Core i7 2720QM
    RAM: Crucial 2x4GB DDR3 1333
    SSD: Samsung 840 Pro 256 GB SSD
    HDD: ADATA Nobility NH13 1GB White
    OS: Mac OS X Mavericks

  21. #121
    Champion
    Join Date
    Jan 2007
    Location
    Romania, lab501.ro
    Posts
    1,710
    If everything works ok, why worry about 4-5 errors only in WIN Memtest?
    Weissbier - breakfast of champions



  22. #122
    Xtreme Addict
    Join Date
    Jul 2008
    Location
    Middletown, CT
    Posts
    1,294
    @Ket
    I noticed the geil sticks in your sig. I just ordered a kit of the 2x1 pc8500 CL5 sticks for the family rig, any comment as to the ICs they might have or performance i might see?
    should i tack on a spare hs?

  23. #123
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,000
    Quote Originally Posted by WaterFlex View Post
    Yes, I tried like you suggested...unfortunately, no improvements...still 2-4 errors after 100 coverage.
    Same amount or less errors after increasing the voltage? I honestly wouldn't worry about it, I have used that app before and didn't like it. I think you are stable if you pass Orthos 12 hrs+, Linpack, and all gaming/3d marks etc.

    If you are determined to try and pass it, try raising the PL to 10 and retest, try dropping your cpu clock, or try dropping the ram clock (each done separately of course). Whichever one makes you stable, you know where to start looking.
    Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
    Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X

  24. #124
    Xtreme Addict
    Join Date
    Feb 2008
    Location
    Russia
    Posts
    1,903
    Quote Originally Posted by CryptiK View Post
    Same amount or less errors after increasing the voltage? I honestly wouldn't worry about it, I have used that app before and didn't like it. I think you are stable if you pass Orthos 12 hrs+, Linpack, and all gaming/3d marks etc.


    If you are determined to try and pass it, try raising the PL to 10 and retest, try dropping your cpu clock, or try dropping the ram clock (each done separately of course). Whichever one makes you stable, you know where to start looking.
    Same amount, yeah.
    I have PL=8 at the current moment. When I set it to 9 i can pass Win Memtest with no errors. I can`t understand what the hell is going on.

    Intel Q9650 @500x9MHz/1,3V
    Asus Maximus II Formula @Performance Level=7
    OCZ OCZ2B1200LV4GK 4x2GB @1200MHz/5-5-5-15/1,8V
    OCZ SSD Vertex 3 120Gb
    Seagate RAID0 2x ST1000DM003
    XFX HD7970 3GB @1111MHz
    Thermaltake Xaser VI BWS
    Seasonic Platinum SS-1000XP
    M-Audio Audiophile 192
    LG W2486L
    Liquid Cooling System :
    ThermoChill PA120.3 + Coolgate 4x120
    Swiftech Apogee XT, Swiftech MCW-NBMAX Northbridge
    Watercool HeatKiller GPU-X3 79X0 Ni-Bl + HeatKiller GPU Backplate 79X0
    Laing 12V DDC-1Plus with XSPC Laing DDC Reservoir Top
    3x Scythe S-FLEX "F", 4x Scythe Gentle Typhoon "15", Scythe Kaze Master Ace 5,25''

    Apple MacBook Pro 17` Early 2011:
    CPU: Sandy Bridge Intel Core i7 2720QM
    RAM: Crucial 2x4GB DDR3 1333
    SSD: Samsung 840 Pro 256 GB SSD
    HDD: ADATA Nobility NH13 1GB White
    OS: Mac OS X Mavericks

  25. #125
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,000
    I thought so, it's the MCH causing the errors. Set PL back to 8, and bump up just the vNB 2 notches. What happens?
    Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
    Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X

Page 5 of 95 FirstFirst ... 23456781555 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •