Micron D9 GMH\GKX\JKH etc club

**aslanwas** · 08-21-2009, 07:06 AM

@ Everybody

Does anybody know where I can get [[ TEAM Xtreem with D9 ]] to germany ?

Thanks

**kuebk** · 08-21-2009, 08:59 AM

http://www.memoryc.com/products/desc...kit/index.html
http://www.memoryc.com/computermemor...eemcl3kit.html

**aslanwas** · 08-22-2009, 05:09 AM

thanks alot,
think will get one

**kuebk** · 08-22-2009, 05:32 AM

Before buying contact them asking is description correct.

**Shiranui Gen-An** · 08-22-2009, 11:34 AM

Not much to worry about buying from MemoryC, especially Team Xtreem.

**Shiranui Gen-An** · 08-22-2009, 11:52 AM

Having a bit of fun with my CellShock CS2221650 "Red Devil" kit and my Maximus Formula, I managed single SuperPi 32M stability@DDR2-1200 4-4-4-4 with 2.50v BIOS set (=2.56v DMM). Ignore the PC Probe II reading, it's a bit high.

**aslanwas** · 08-22-2009, 01:08 PM

{[ Before buying contact them asking is description correct. ]]

@ Kuebk:

too late, I already bought a kit, i hope i can reach something about 1400+

**Shiranui Gen-An** · 08-22-2009, 01:39 PM

Originally Posted by aslanwas

too late, I already bought a kit, i hope i can reach something about 1400+

If you wanted something to push that high, you should have gotten these or these.

**stasio** · 08-22-2009, 03:01 PM

Originally Posted by Shiranui Gen-An

Not much to worry about buying from MemoryC, especially Team Xtreem.

My 1300C6 I got from them.

PC2-9600-now cheaper 20 Euro
PC2-10400-now higher 7 Euro
PC2-10400,VDimm 2.38

http://valid.canardpc.com/show_oc.php?id=659865

**kuebk** · 08-22-2009, 03:14 PM

Afair new Goodrams Pro 2x1 can reach 700mhz easily, they are made of d9hcd.

**Shiranui Gen-An** · 08-22-2009, 05:16 PM

Originally Posted by stasio

My 1300C6 I got from them.

PC2-9600-now cheaper 20 Euro
PC2-10400-now higher 7 Euro
PC2-10400,VDimm 2.38

http://valid.canardpc.com/show_oc.php?id=659865

Mind sharing your BIOS settings? For whatever reason I'm having great difficulty these days with my UD3P, maybe it prefers my E8400s over my E8500.

**stasio** · 08-22-2009, 09:24 PM

Originally Posted by Shiranui Gen-An

Mind sharing your BIOS settings? For whatever reason I'm having great difficulty these days with my UD3P, maybe it prefers my E8400s over my E8500.

Gigabyte GA-EP45-UD3P (Rev. 1.0) - F10e
*************************************
*************************************
******************************
MB Intelligent Tweaker(M.I.T.)
******************************
Robust Graphics Booster ..............: [Fast]
CPU Clock Ratio ......................: [10X]
x Fine CPU Clock Ratio................: +0.0
CPU Frequency ........................: 4.3GHz( 430x10)
********** Clock Chip Control ********
>>>>> Standard Clock Control
CPU Host Clock Control................: [Enabled]
x CPU Host Frequency(Mhz).............: [430]
PCI Express Frequency(Mhz)............: [101]
C.I.A.2...............................: [Disabled]
>>>>> Advanced Clock Control..........: [Press Enter]
CPU Clock Drive.......................: [800mV]
PCI Express Clock Drive...............: [900mV]
CPU Clock Skew........................: [ 0ps]
MCH Clock Skew........................: [ 0ps]
******** DRAM Performance Control ********
Performance Enhance...................: [Standard]
Extreme Memory Profile(X.M.P.)........: [Disabled]
(G)MCH Frequency Latch................: [Auto]
System Memory Multiplier (SPD)........: [3.00A]
Memory Frequency(Mhz).....800.........: 1290
DRAM Timing Selectable (SPD)..........: [Manual]
>>>>> Standard Timing Control
x CAS Latency Time................5...: [ 5]
x tRCD ...........................5...: [ 5]
x tRP.............................5...: [ 5]
x tRAS...........................18...: [15]
>>>>> Advanced Timing Control.........: [Press Enter]
x tRRD............................3...: [ Auto]
x tWTR............................3...: [ Auto]
x tWR.............................6...: [ Auto]
x tRFC...........................42...: [Auto]
x tRTP............................3...: [ Auto]
x Command Rate (CMD) .............0...: [ Auto]
>>>>> Channel A Timing Settings.......: [Press Enter]
x Static tRead Value.............7...: [ 7]
x tRD Phase0 Adjustment...........0...: Auto
x tRD Phase1 Adjustment...........0...: Auto
x tRD Phase2 Adjustment ..........0...: Auto
x tRD Phase3 Adjustment...........0...: Auto
x Trd2rd(Different Rank)..........6...: Auto
x Twr2wr(Different Rank)..........6...: Auto
x Twr2rd(Different Rank)..........5...: Auto
x Trd2wr(Same/Diff Rank)..........8...: Auto
x DIMM1 Clock Skew Control (ps).......: Auto
x DIMM2 Clock Skew Control (ps).......: Auto
x DDR Write Training..................: Auto
>>>>> Channel A Driving Settings......: [Press Enter]
x Driving Strength Profile............: [1300MHz]
x Data Driving Pull-Up Level..........: Auto
x Cmd Driving Pull-Up level...........: Auto
x Ctrl Driving Pull-Up Level..........: Auto
x Clk Driving Pull-Up Level...........: Auto
x Data Driving Pull-Down Level........: Auto
x Cmd Driving Pull-Down level.........: Auto
x Ctrl Driving Pull-Down Level........: Auto
x Clk Driving Pull-Down Level.........: Auto
>>>>> Channel B Timing Settings.......: [Press Enter]
x Static tRead Value.............7...: [ 7]
x tRD Phase0 Adjustment...........0...: Auto
x tRD Phase1 Adjustment...........0...: Auto
x tRD Phase2 Adjustment ..........0...: Auto
x tRD Phase3 Adjustment...........0...: Auto
x Trd2rd(Different Rank)..........6...: Auto
x Twr2wr(Different Rank)..........6...: Auto
x Twr2rd(Different Rank)..........5...: Auto
x Trd2wr(Same/Diff Rank)..........8...: Auto
x DIMM1 Clock Skew Control (ps).......: Auto
x DIMM2 Clock Skew Control (ps).......: Auto
x DDR Write Training..................: Auto
>>>>> Channel B Driving Settings......: [Press Enter]
x Driving Strength Profile............: [1300MHz]
x Data Driving Pull-Up Level..........: Auto
x Cmd Driving Pull-Up level...........: Auto
x Ctrl Driving Pull-Up Level..........: Auto
x Clk Driving Pull-Up Level...........: Auto
x Data Driving Pull-Down Level........: Auto
x Cmd Driving Pull-Down level.........: Auto
x Ctrl Driving Pull-Down Level........: Auto
x Clk Driving Pull-Down Level.........: Auto
****** Motherboard Voltage Control ******
Voltage Types..........Normal...........Current
-----------------------------------------------
>>> CPU
Load-Line Calibration.................: [Enabled]
CPU Vcore..............1.17500V.......: [1.2500V]
CPU Termination........1.200V.........: [1.220V]
CPU PLL................1.500V.........: [1.570V]
CPU Reference..........0.760V.........: [Auto]
>>> MCH/ICH
MCH Core...............1.100V.........: [1.240V]
MCH Reference..........0.760V.........: [Auto]
MCH/DRAM Reference.....0.900V.........: [Auto]
ICH I/O................1.500V.........: [Auto]
ICH Core...............1.100V.........: [Auto]
>>> DRAM
DRAM Voltage...........1.800V.........: [2.420V]
DRAM Termination.......0.900V.........: [Auto]
Channel A Reference....0.900V.........: [Auto]
Channel B Reference....0.900V.........: [Auto]
http://img139.imageshack.us/img139/9...0818044605.png

**xacti** · 08-22-2009, 11:26 PM

How about Crucial Lanfest D9GMH ? Is it worth buying?

**kuebk** · 08-23-2009, 01:12 AM

Imo it's better to buy 1066 kits from crucial than 800.

**Don_Dan** · 08-23-2009, 02:28 AM

Well, if you can get them for cheap, why not! Even Crucial's 5300s were good memory!

**xacti** · 08-23-2009, 03:03 AM

I can get them for about 25 euros, i need 1250mhz so i think these mems fit there

**Don_Dan** · 08-23-2009, 03:21 AM

That price is okay in my opinion, go for it and post some results!

**aslanwas** · 08-23-2009, 06:08 AM

Originally Posted by Shiranui Gen-An

If you wanted something to push that high, you should have gotten these or these.

These were to expensive, I'm not a rich person, and immediatly i bought a rampage extreme, IFX14 an BeQuiet DarkpowerPro 750 Modular for 200€, so my money has run out for the next two months,

i'm still going to school and have no work --> less money

**kuebk** · 08-23-2009, 06:16 AM

Originally Posted by Don_Dan

Well, if you can get them for cheap, why not! Even Crucial's 5300s were good memory!

I would even say that some of them were better than 6400 kits.

Originally Posted by xacti

I can get them for about 25 euros, i need 1250mhz so i think these mems fit there

Doesn't sound bad, I paid for mine 20usd. For such speed you will probably need around 2.4v [this is what my lanfest's wants to] to work at ~600mhz. And that's what I'm consider as pretty high voltage for 24/7 use.

**xacti** · 08-23-2009, 07:03 AM

Firstly im not going to use this mem 24/7. We need it to get over 600fsb because atm kingston memory blocks us. it does only 1150MHz on 2.35v (real 2.37v).

**kuebk** · 08-23-2009, 07:06 AM

Originally Posted by xacti

Firstly im not going to use this mem 24/7. We need it to get over 600fsb because atm kingston memory blocks us. it does only 1150MHz on 2.35v (real 2.37v).

If you want to I can check how high will they go.

**aslanwas** · 08-23-2009, 07:26 AM

Sorry for spamming this thread, but I'm searching a RamPot for Overclocking the Ram with Dice or go LN2 and

how can I store in Dice ?
Need I an ICEBOX to store it ?

It should be available to germany and the price should be a bit ......

school is going on again on Monday

**CryptiK** · 08-23-2009, 08:31 AM

I've no idea where you can purchase a proper ram pot.

I store my dry ice in a thick walled polystyrene box, with a thick base and a thick lid. This is also placed in another polystyrene or cardboard box. I place broken panels of polystyrene on top of the dry ice in the box also to aid insulation.

**Don_Dan** · 08-23-2009, 09:32 AM

aslanwas, PM Nanok for his RAMpot, he can build one for you.

**Blue Storm** · 08-27-2009, 07:57 AM

Originally Posted by Mafio

good ram and awesome mobo

ep45 extreme is the best mobo for ram clocking, with cellshock on it you must do at least 1200mhz cas4

thanks...I must learn all timing items because before I bought Cell Shock's I had Commando and there isn't many items on adjusting the timing and maybe I will get 1200MHz 4-4-4-4...with 5-5-5-5 I got 1330MHz, but 1335MHz wasn't stable with 2.5V

Thread: Micron D9 GMH\GKX\JKH etc club

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions