No unfortunately I've sold all cpus that can do 600fsb. I don't see any reason to bench s775 since sandy came :/ Vmch didn't seem to matter, kept it around 1.35. But dram ref voltage mattered a lot, sweet spot is -20mV on ch A, B.
No unfortunately I've sold all cpus that can do 600fsb. I don't see any reason to bench s775 since sandy came :/ Vmch didn't seem to matter, kept it around 1.35. But dram ref voltage mattered a lot, sweet spot is -20mV on ch A, B.
Overclocking, it's a lifestyle
DDR2 714 cas5 on AIR !!
714mhz C5-5-5-35 2T Just have a look hommies
2x1024mb CRUCIAL Ballistix Tracer DDR2 PC8500 D9 gmh (16F17) on GA-EP45-UD3P with 2,6v
A little preview of the BW
Last edited by Eeky NoX; 05-04-2011 at 11:28 AM.
Klan-OC Team .fr
- ASUS M5G/M4G - GIGABYTE GA-P55/67A-UD7 - EVGA P55 FTW - GA-EP45-UD3P -
- INTEL i7 3770 & 2600K/i5 750/i5 661 & i3 530/E8600/E6800/E6500K +CORSAIR H70 or THERMALRIGHT TrueBlack 120 (Full WC/SS/Cascade/LNē optional ^^) -
- G.SKILL TridentX PC3 2400C10 (2x4gb)/Ripjaws X PC3 17600C7 & PerfectStorm PC3 17066C8[/B] (2x2gb)/CRUCIAL Value PC3 10700 (2x1gb @880 cas6)
CRUCIAL BallistiX Tracer PC8500 (2x1gb @704 cas5) -
- SAPPHIRE HD 7970 / SLI MSI GTX580 Lightning / MSI GTX275 Lightning / MSI GTX 560Ti Hawk / ASUS HD 4870 1Gb DK / CFs MSI HD5770 Hawk & ASUS HD4770 -
- CORSAIR AX1200 & HX650 / ENERMAX REVOLUTION 1250w & MODU 82+625w -
- CRUCIAL M4 128Gb RAID0 /OCZ Vertex 3 120Gb & Turbo 30Gb / WD Velociraptor 150Gb/Raid0 & WD Raptor 76Gb/Raid0 /3x WD Caviar Black 2To -
THE AMOUNT OF HW ISN'T REPRESENTATIVE OF YOUR SKILLZ ...IF YOU'RE THE KING OF THE HILL, PROVE IT THOUGH!!
Suicide overclocks did that chip degrade overall with that vcore? Balis are great to bad they never made 2 gb sticks and only 1gb per stick.
Klan-OC Team .fr
- ASUS M5G/M4G - GIGABYTE GA-P55/67A-UD7 - EVGA P55 FTW - GA-EP45-UD3P -
- INTEL i7 3770 & 2600K/i5 750/i5 661 & i3 530/E8600/E6800/E6500K +CORSAIR H70 or THERMALRIGHT TrueBlack 120 (Full WC/SS/Cascade/LNē optional ^^) -
- G.SKILL TridentX PC3 2400C10 (2x4gb)/Ripjaws X PC3 17600C7 & PerfectStorm PC3 17066C8[/B] (2x2gb)/CRUCIAL Value PC3 10700 (2x1gb @880 cas6)
CRUCIAL BallistiX Tracer PC8500 (2x1gb @704 cas5) -
- SAPPHIRE HD 7970 / SLI MSI GTX580 Lightning / MSI GTX275 Lightning / MSI GTX 560Ti Hawk / ASUS HD 4870 1Gb DK / CFs MSI HD5770 Hawk & ASUS HD4770 -
- CORSAIR AX1200 & HX650 / ENERMAX REVOLUTION 1250w & MODU 82+625w -
- CRUCIAL M4 128Gb RAID0 /OCZ Vertex 3 120Gb & Turbo 30Gb / WD Velociraptor 150Gb/Raid0 & WD Raptor 76Gb/Raid0 /3x WD Caviar Black 2To -
THE AMOUNT OF HW ISN'T REPRESENTATIVE OF YOUR SKILLZ ...IF YOU'RE THE KING OF THE HILL, PROVE IT THOUGH!!
Lol Sorry, you have a better memory than me :p I forget about this post last year.
No real improvement at last, the board isn't as good as the first one. Bw is high because of the CPU under SS and some tweaks on XP maybe...
Klan-OC Team .fr
- ASUS M5G/M4G - GIGABYTE GA-P55/67A-UD7 - EVGA P55 FTW - GA-EP45-UD3P -
- INTEL i7 3770 & 2600K/i5 750/i5 661 & i3 530/E8600/E6800/E6500K +CORSAIR H70 or THERMALRIGHT TrueBlack 120 (Full WC/SS/Cascade/LNē optional ^^) -
- G.SKILL TridentX PC3 2400C10 (2x4gb)/Ripjaws X PC3 17600C7 & PerfectStorm PC3 17066C8[/B] (2x2gb)/CRUCIAL Value PC3 10700 (2x1gb @880 cas6)
CRUCIAL BallistiX Tracer PC8500 (2x1gb @704 cas5) -
- SAPPHIRE HD 7970 / SLI MSI GTX580 Lightning / MSI GTX275 Lightning / MSI GTX 560Ti Hawk / ASUS HD 4870 1Gb DK / CFs MSI HD5770 Hawk & ASUS HD4770 -
- CORSAIR AX1200 & HX650 / ENERMAX REVOLUTION 1250w & MODU 82+625w -
- CRUCIAL M4 128Gb RAID0 /OCZ Vertex 3 120Gb & Turbo 30Gb / WD Velociraptor 150Gb/Raid0 & WD Raptor 76Gb/Raid0 /3x WD Caviar Black 2To -
THE AMOUNT OF HW ISN'T REPRESENTATIVE OF YOUR SKILLZ ...IF YOU'RE THE KING OF THE HILL, PROVE IT THOUGH!!
So i've had a few kits of d9's for a while now, but never bothered to post here. Now i will.
Websmile seems to have the most amazing kits around, but i have a few that aren't too shabby.
EDIT: Updated with non-bugged divider, still 16fd5, 700mhz @2.54v for 32m, 2.4v for 1m.
Non-bugged divider run:
Last edited by xxrabid93; 05-17-2011 at 02:23 PM.
I dont know what is rated GOOD speeds on these D9GKX ic's, but mine is now doing pretty well running spi 32M with 1200MHz 5-5-4-10 with 2.4volts bios showing
Gotta try how far i can pull these with 2.4v 5-5-5-15. How much voltages is still safe on spi runs?
1000MHz 4-4-4-8 was ok too, didnt try more yet.
Sticks is Buffalo Firestix rated 800Mhz 4-4-4-12
X58: R3E & XPOWER | 980X | GTX580 | 3x2gb MGH-e | Dimastech | AX1200
s775: RE | E8600 | GTX285 | 4x1gb D9GTR | P&C 610W
SB: 2600k | Asus P8P67 & Gigabyte UD4 | GTX 460 1gb | 550W Cougar
At 2.40V you should be at least 50 MHz higher on both CLs.
For example my Crucial 10th Anniversary Kit that I use for benching needs 2.06V for 600 MHz 5-5-5-15 and 2.13V for 500 MHz 4-4-4-12, and it's just a mediocre kit, far from what I would call a good kit.
Can you try what your kit needs for these settings?
I've given my kit 2.65V for a short time while benching high CL4 on 1:1 (1M, MaxxMem), for 32M my personal limit is closer to ~2.50V though...
Don Dan: Yes i can try what i need for those, atleast tomorrow if i cant run it fast now. Have to go sleep soon.
I try that 500 CL4 now and other one tomorrow. Il post soon!
Edit:
2.12v 4-4-4-12 1000MHz Fail.
2.016v 5-5-5-15 1200MHz didnt even boot in windows.
il try more tomorrow. I have one other patriot 2x1gb gkx kit and 4x axerams too so more is coming
Obviously this kit isnt any special, but atleast this was cheap
Last edited by SeMbEr; 05-17-2011 at 01:15 PM.
X58: R3E & XPOWER | 980X | GTX580 | 3x2gb MGH-e | Dimastech | AX1200
s775: RE | E8600 | GTX285 | 4x1gb D9GTR | P&C 610W
SB: 2600k | Asus P8P67 & Gigabyte UD4 | GTX 460 1gb | 550W Cougar
Sorry for necroposting but I think I've something rather interesting to share with my fellow DDR2 enthusiasts here on xs.
E6750 - FSB 545x8 (not that good) single stage cooled
Gigabyte EP45-Extreme - BIOS F8
Cellshock PC8000 naked - D9-GKX - 1308 MHz 4-4-4-4 trfc 26 trrd 1 PL 7 Super-PI 32M stable
VDIMM 3 volt
Looks like the board is also pretty fast: http://hwbot.org/submission/2577717_...min_1sec_968ms
Last edited by Mafio; 07-06-2014 at 10:58 AM.
Yes, they scale very well with voltage.
2.8 v -> crash at loop 3/4
2.9 v -> crash at loop 11
3.0 v -> pass
Too bad the board doesn't let me feed them with more juice.
Nice to see some good old DDR2 kickin ass Mafio Interesting to see such good performance from P45 too, thought only Biostar could manage such 32m efficiency. I tried Rampage formula with various good kits some days ago, but nothing close to this. I have some Dominator 1111 4-4-4 and cellshock 1000 4-4-4 sticks that should go really high.
Overclocking, it's a lifestyle
Thanks, socket 775 is still a lot of fun.
The motherboard is also pretty fast with 45nm CPUs, here is a Q9550 at 520x8.5, Cellshock 624 MHz 4-4-4-4 and PL 7 32M stable.
http://hwbot.org/submission/2576098_
P.S. Can't believe it, yesterday's morning a CPU power phase completely blew up - both driver and mosfets - while benching the E6750 single stage cooled.
The motherboard shutdown in a strange way during the boot, at first I thought the CPU died (I was using VPLL 2.6 v ) but after a closer look I found out it was the motherboard...VCORE was only 1.7 v and I had a fan on the PWM zone...f(l)uck
For some kind of miracle both the CPU and the motherboard are still working so looks like now I have the only EP45-Extreme with 5 CPU phases.
I have another or two of those boards I can take off parts but I think I am missing the right tool (hot air station) to change the mosfets.
Bookmarks