G.Skill PC2-6400 HZ with d9gmh @ 60e.
Shall I buy them? or too much?
The guy that has them now tell me that they can play @ 1000 for 24/7 and @ 1250 for benching.
G.Skill PC2-6400 HZ with d9gmh @ 60e.
Shall I buy them? or too much?
The guy that has them now tell me that they can play @ 1000 for 24/7 and @ 1250 for benching.
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
My UT P35 was able to run my newest D9 FlexXLC kit at 555FSB 666MHz C5 PL8.
i7 4930K
32GB Corsair Vengeance Pro DDR3-2400C10
Asus Rampage IV Black Edition
2x GeForce GTX 780
Corsair AX1200
Cooler Master HAF-X
Dell U3011
i found a set cm2x1024-6400c3D G for sale 2.40V ver1.1 has this memory d9gmh chips or d9gkx?
e8500 c0 - 4275MHz - 1,344 vCore
DFI UT P45-T2RS
4x1gb D9GMH
Ati HD4870
Modded HAF 932
Watercooled:
Heatkiller v3.0 cu - D-tek Fuzion GFX 2 - PA120.1 - PA120.2 - PA120.4
there's no difference between d9gmh and d9gkx
i7 4930K
32GB Corsair Vengeance Pro DDR3-2400C10
Asus Rampage IV Black Edition
2x GeForce GTX 780
Corsair AX1200
Cooler Master HAF-X
Dell U3011
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
There was a HUGE difference between my GKX and GMH kits - I reckon these particular ICs were binned pretty tight.
I've owned no less than five kits - two GKX and three GMH, all Cell Shock. Both my GKX kits could do 4-3-3-9 at 950MHz with about 2.15v, whereas all three GMH kits struggled to get above 900MHz 4-4-4-10 with 2.1v. The GKX kits did 1100MHz 4-4-4 with relative ease and were also much better with CAS 5 overclocking.
i7 920 D0 | TRUE Cu | ASUS RIIIE | 6GB Dominator GT | Gigabyte GTX480 Special Edition | Win7 Ultimate x64
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
Last edited by chad; 01-26-2010 at 08:53 PM.
www.vitesse24.de
www.vitesse24.de
C2Q q6600 3.3GHZ @ 1,184V
4,5GHZ@ 1,52V ( 9* 500 )
Corsair Dominator 10000 2gb, 8888 2gb, 9136 1gb
1 of my crucial dominators... I mean ballistix has died. I ordered some g.skill pc8800 PI heatspreaders 1.8-1.9v. They were the last kit of its kind in stock. Only need to overclock them 30Mhz to 1130 to test my q9550 at 4Ghz.
I think crucial had a higher failure rate than others using the same chips? I have RMA them and will probably get some crap back. I rma'ed the pair still running on my other pair.
here some warm-up guys, got 20sticks of corsair dominator, began to test with the best of them, Corsair dominator 10000, 1250 mhz 5-5-5-18
www.vitesse24.de
www.vitesse24.de
C2Q q6600 3.3GHZ @ 1,184V
4,5GHZ@ 1,52V ( 9* 500 )
Corsair Dominator 10000 2gb, 8888 2gb, 9136 1gb
What vdimm you using for 1200 4-4-4 My GKX (when the other module was still functional) needed 2.3v for 1100 4-4-4 benchable.
I didn't realise dominator was D9, but now I see that the PC10000 kits used handpicked GMH ICs which at least explains that they even get to 1200 4-4-4.
Just picked up a 2x1GB kit of Cell Shock 1000 4-4-4 so I'm back in the game (until they die lol ). If I could run 500fsb with DDR 1200 daily I'd be a happy camper.
Last edited by LennyRhys; 01-28-2010 at 02:48 PM.
i7 920 D0 | TRUE Cu | ASUS RIIIE | 6GB Dominator GT | Gigabyte GTX480 Special Edition | Win7 Ultimate x64
Good work aslanwas, which board are you running?
Can you include MemSet next time please?
Where did you get all these kits?
It's good to see some people still pushing DDR2 D9!
I switched to DDR3 currently ( actually, I haven't done anything in the last 3 months ), but I'm sure I will be back to D9GMH/GKX one day, I still have 3 DDR2 kits I never tested...
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
my first D9GKX did 600 CAS4 with 2,6V
Thx mate, Board P35-DS4, but is going to dy or i am going to kill it (max freq. is about 1400 with these RAM, with a P45, i think i could get over 1600 under cold )
I got these sticks on ebay US, but had to pay over 230€ for all of them, but it was worth as i can see
don't worry, be happy
www.vitesse24.de
www.vitesse24.de
C2Q q6600 3.3GHZ @ 1,184V
4,5GHZ@ 1,52V ( 9* 500 )
Corsair Dominator 10000 2gb, 8888 2gb, 9136 1gb
aslanwas
gj
Intel Q9650 @500x9MHz/1,3V
Asus Maximus II Formula @Performance Level=7
OCZ OCZ2B1200LV4GK 4x2GB @1200MHz/5-5-5-15/1,8V
OCZ SSD Vertex 3 120Gb
Seagate RAID0 2x ST1000DM003
XFX HD7970 3GB @1111MHz
Thermaltake Xaser VI BWS
Seasonic Platinum SS-1000XP
M-Audio Audiophile 192
LG W2486L
Liquid Cooling System :
ThermoChill PA120.3 + Coolgate 4x120
Swiftech Apogee XT, Swiftech MCW-NBMAX Northbridge
Watercool HeatKiller GPU-X3 79X0 Ni-Bl + HeatKiller GPU Backplate 79X0
Laing 12V DDC-1Plus with XSPC Laing DDC Reservoir Top
3x Scythe S-FLEX "F", 4x Scythe Gentle Typhoon "15", Scythe Kaze Master Ace 5,25''
Apple MacBook Pro 17` Early 2011:
CPU: Sandy Bridge Intel Core i7 2720QM
RAM: Crucial 2x4GB DDR3 1333
SSD: Samsung 840 Pro 256 GB SSD
HDD: ADATA Nobility NH13 1GB White
OS: Mac OS X Mavericks
Nice results. Haven't busted out my D9 stash in quite sometime.
Bookmarks