Page 52 of 95 FirstFirst ... 2424950515253545562 ... LastLast
Results 1,276 to 1,300 of 2366

Thread: Micron D9 GMH\GKX\JKH etc club

  1. #1276
    Xtreme Enthusiast
    Join Date
    May 2005
    Location
    Anaheim CA
    Posts
    818

    Dfi

    Hey guys, i saw a thread here somewhere, with somebody hitting 670 fsb with the dfi dk p45 trs2, looks like a killer board, but the ud3p is killer to, didnt highcookie hit 675 fsb with the ud3p, but i agree with Zsamz, i dont like gigabytes.
    MSI 790FX GD-70
    965 BE C3
    4Gigs Corsair GTS 2000 Cas 8
    Noctua U12P Push Pull

  2. #1277
    Xtreme Addict
    Join Date
    May 2008
    Location
    Decatur, GA
    Posts
    1,528
    It looks like there was some D9GMH manufactured in 2008 after all. This is a shot of the chips on the G.Skill HK kit I got in today from MemoryC as a replacement for my Cellshock 8000 C5 that died.
    Attached Images Attached Images

  3. #1278
    Xtreme Member
    Join Date
    Nov 2007
    Location
    Chicago, Illinois
    Posts
    114
    Quote Originally Posted by radaja View Post
    i agree with you on that.if it was me i would go for the plus version,but for people who might be very strapped for cash,they wont be missing out too much,i guess is where im getting at.cheers
    The DFI LP DK P45-T2RS PLUS is actually cheaper that then the other by about $5 at Newegg for $149.99.

    Well now I'm torn between the Gigabyte UD3P and the DFI P45-T2RS.

    It looks like there was some D9GMH manufactured in 2008 after all. This is a shot of the chips on the G.Skill HK kit I got in today from MemoryC as a replacement for my Cellshock 8000 C5 that died.
    My Team Group GKX are also made in 2008.
    Intel Core2Quad Q6600 4.1Ghz@1.68v 3.6Ghz 24\7|EVGA nForce 680i SLI|BFG Tech 8800GTX 675Mhz\1566Mhz\2106Mhz|Team Group Xtreem PC2-9600 1266Mhz|Custom WC Kit CPU\GPU\PA120.2|

  4. #1279
    Dave's Mentor!
    Join Date
    May 2007
    Location
    montreal
    Posts
    5,217
    Quote Originally Posted by neo mike View Post
    Hey guys, i saw a thread here somewhere, with somebody hitting 670 fsb with the dfi dk p45 trs2, looks like a killer board, but the ud3p is killer to, didnt highcookie hit 675 fsb with the ud3p, but i agree with Zsamz, i dont like gigabytes.
    for benchin who cares
    you bench you kill the board n get another
    but for the long run gigabut
    i see u learned the hard way mike
    but not as hard as my 2007 gigabut madness i just happy 6 outa 7 of em died

    maximus IV extreme gtx580
    gigabut p67-ud7
    p67 sabertooth
    2500k+2600k
    antec 1200watt
    EVGA classified 760
    920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
    OCZ3RPR1866LV6GK hypers
    dfi ut p35 rampage extreme
    gigabut p35c-ds3r bios suks
    gigabut x38-d6q dead thank god
    ballistix 8500 1240mhz@2.02v

  5. #1280
    Xtreme Addict
    Join Date
    May 2008
    Location
    Decatur, GA
    Posts
    1,528
    Quote Originally Posted by Mr Roboto View Post
    My Team Group GKX are also made in 2008.
    Are the ICs themselves made in 2008 though? If the code starts with 7 they were made in 07.

  6. #1281
    Xtreme Enthusiast
    Join Date
    May 2005
    Location
    Anaheim CA
    Posts
    818

    I learned

    I went thru 3 gigabyte board in 4 months, one of them died on me, i can safely say i wont own one again. I have my first asus board, much better , and now im buying my 2nd asus board. Zsamz if your considering a ddr3 board, the asus rampage extreme is the best of the best, thats going to be my new board.
    Last edited by neo mike; 02-18-2009 at 06:37 PM.
    MSI 790FX GD-70
    965 BE C3
    4Gigs Corsair GTS 2000 Cas 8
    Noctua U12P Push Pull

  7. #1282
    Dave's Mentor!
    Join Date
    May 2007
    Location
    montreal
    Posts
    5,217
    Quote Originally Posted by neo mike View Post
    I went thru 3 gigabyte board in 4 months, one of them died on me, i can safely say i wont own one again. I have my first asus board, much better , and now im buying my 2nd asus board. Zsamz if your considering a ddr3 board, the asus rampage extreme is the best of the best, thats going to be my new board.
    i almost bought a ddr3 board today
    i'm just having too much fun with ddr2 i just bought 2 more sets
    ddr3 would be boring i think
    i'm gonna wait for ddr4 or ddr5

    maximus IV extreme gtx580
    gigabut p67-ud7
    p67 sabertooth
    2500k+2600k
    antec 1200watt
    EVGA classified 760
    920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
    OCZ3RPR1866LV6GK hypers
    dfi ut p35 rampage extreme
    gigabut p35c-ds3r bios suks
    gigabut x38-d6q dead thank god
    ballistix 8500 1240mhz@2.02v

  8. #1283
    Xtreme Enthusiast
    Join Date
    May 2005
    Location
    Anaheim CA
    Posts
    818

    What ???????

    You have a longggggggggggggggg wait for ddr4, ddr3 is just getting going, its up to 2133 cas 7, THATS BORING ?, probally hit 2500-2600 before it goes ddr4, i made the switch to ddr3 glad i did.
    MSI 790FX GD-70
    965 BE C3
    4Gigs Corsair GTS 2000 Cas 8
    Noctua U12P Push Pull

  9. #1284
    Xtreme Member
    Join Date
    Nov 2007
    Location
    Chicago, Illinois
    Posts
    114
    Quote Originally Posted by Shiranui Gen-An View Post
    Are the ICs themselves made in 2008 though? If the code starts with 7 they were made in 07.
    I see what you're saying. No the IC's have a 7 on them. Everest reports they were made in 2008, but that could have just been when they were assembled.

    Quote Originally Posted by neo mike View Post
    You have a longggggggggggggggg wait for ddr4, ddr3 is just getting going, its up to 2133 cas 7, THATS BORING ?, probally hit 2500-2600 before it goes ddr4, i made the switch to ddr3 glad i did.
    IMO the price to performance of DDR3 is focked. You have to spend some serious cash to get 2000Mhz DDR3 with any decent latency. Who wants DDR3 1600Mhz C9? Not me, I'll stick with DDR2 for another 9 months or so. Still waiting for the DDR3 equivalent of the Micron D9. That's what makes it boring to me.
    Last edited by Mr Roboto; 02-18-2009 at 07:12 PM.
    Intel Core2Quad Q6600 4.1Ghz@1.68v 3.6Ghz 24\7|EVGA nForce 680i SLI|BFG Tech 8800GTX 675Mhz\1566Mhz\2106Mhz|Team Group Xtreem PC2-9600 1266Mhz|Custom WC Kit CPU\GPU\PA120.2|

  10. #1285
    Xtreme Member
    Join Date
    Oct 2003
    Posts
    221
    Hi,

    I flash my P5E with the last Rampage formula bios and I have access to the skew setting over the CPU and the NB.

    Before this bios I couldn't stabilise this kit of cellshock PC 8500 even at 1200 cas5 .

    but now I've succeed on this:

    Last edited by tomati; 02-19-2009 at 05:32 AM.
    P5E Deluxe x38 @ Rampage Formula (Bios 0802) || E8600 @ 4500mhz @ 1,38v || Ultra 120 Extreme + 2 Yate Loon D12sl + IFX-10 || 2 GB Cellshock PC8500 D9GMH @ 600 (2.3v) 5/5/5/15/2T || 4 x 640gb WD sata II || HD4870 @ 775 - 1000 || CM Stacker STC-01 + 4 Yarte Loon D12SL || Enermax modu82+ 625W || Audigy2 ZS || Logitech Z-5500D || Lacie Electron22BlueIV 22"

  11. #1286
    Xtreme Addict
    Join Date
    Mar 2008
    Location
    Minnesota
    Posts
    1,619
    Very nice!

    If you guys were buying a DDR2 775 board just for benching (Pi and 01 mostly) what would it be? Needs to hit high FSB of course. Crossfire support would be a plus but not a requirement
    i5 2500K @ 4.9GHz+ 8GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 6 Asus P8P67 Pro CrossFire 6970's @ 950/1450
    Xeon X5677 @ 4.5Ghz 6GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 7 Gigabyte EX58-UD5 4870x2
    i7-880 @ 4.2Ghz+ (still playing) 4GB G-Skill RipJaws DDR3-2000 @2300Mhz CAS 9 Asus Maximus III Formula MSI Hawk 5770

  12. #1287
    Xtreme Addict
    Join Date
    May 2008
    Location
    Decatur, GA
    Posts
    1,528
    Gigabyte UD3x series, DFI DK P45 or X48 Plus, DFI UT P35 or P45.

  13. #1288
    Registered User
    Join Date
    Dec 2007
    Posts
    17
    Well, I received the Crucial 2x2Gb Ballistix Tracers meant to replace my 4x1gb 8500 Ballistix Tracer 16fd3's.

    They are kit of 2X2GB BL25664AL80A, 16FE5. white sticker under CRUCIAL.COM reads: number 20 in circle with: CL1119P.35 103638

    They sent them in a thin plastic bubble wrap envelope packaged in the standard plastic Crucial 2 pak, I'm amazed they were'nt bent or broken. Of course the email they sent me about my returning my 4x1gb had a stern warning about how I should package the modules correctly and responsibly or they would not be responsible for the damage.

    Here are my thoughts on the new 2x2gb Crucial Ballistix Tracer 6400:

    They dont overclock as well as the original 4x1gb 16fd3's setup, but I guess they are close. They had no problem doing my lastest 24/7 overclock of
    q6600 @8x430, 3440mhz CPU, 2X2GB 1076mhz@55515 2.0v on Asus p5k deluxe.

    Whats a little disturbing to me is the performance numbers, especially the Everest memory latency which i find is a number you can actually feel when gaming and in computer response.

    My orginal 4x1gb setup actually got better Everest Memory Latency of
    51.3 with 4x1gb 16fd3's

    I was expecting Everest Memory Latency to improve going to 2x2gb setup.
    This is not the case with the New 2x2gb Tracers. With the same overclock of q6600@8x430, 3440mhz CPU, 2X2GB 1076mhz@55515 2.0v

    On Asus p5k deluxe I get Everest Memory Latency of 52.8. not bad but slower than before.

    The difference being the memory subtimings on the New 2x2gb tracers.
    Especially the refresh cycle time trfc.

    On my old 4x1gb 16df3 tracers I ran subtimings of 3 30 3 3.
    On the new 2x2gb tracers refresh cycle time trfc is a whopping 52 on memset. I can set it down to 46 before i get bsod.

    This proably accounts for the Everest Memory latency of 52.8 with new 2x2gb set. On my old 4x1gb Tracer setup I had a trfc of 30. Why is the trfc so high?

    Is this common to all 2x2gb sets? I have also tested the new set up to 1100mhz 9x333 with no problem. I'm not happy with the very high trfc of 52 Its killing the Everest Memory Latency number which for me equates to computer response.

    The one good set of 2x1gb Tracers i have left can get a 49.5 memory latency @ 44412 1076mhz with the 8x430.

    I dont know if im going to keep the new 2x2gb Tracers and send back my 4x1gb. I will have to give that some thought. My old 4x1 setup was slightly faster. I may send these back and just stay 2x1gb and pick up a second 2x1gb or try another 2x2gb set.

    Thinking about trying this Gskill set here
    http://www.newegg.com/Product/Produc...82E16820231166

    Has anyone had any experience with these?

    Bcc335

    Quote Originally Posted by Bcc335 View Post
    Well, My Crucial Ballistix Tracers 2x1gb 16fd3 have finally dumped!
    Well, 1 stick did, the other is still good, but considering the reliability record of these wonderful hot rods it proably isnt to far behind the bad one.

    Anyways was doing 4x1gb on asus p5k deluxe, would like to go 2x2gb now.

    Guys, What are your recommendation for the best 2x2gb ddr2 dual channel sets currently out? I do overclock and heavy gaming. currently running the Crucials @ 1075mhz 55515.

    Was looking at the Patroit Viper 8500 2x2gb, are there any 2x2gb d9's out there.

    Thanks
    Last edited by Bcc335; 02-19-2009 at 11:30 PM.
    Q6600 on Asus P5k Deluxe bios 0404
    Dualboot WinXPsp3/Win7 64
    EVGA GTX 580 & XFX 8800 GTS 640mb PhysX
    4gb 8500 Crucial Ballistix Tracers
    2 x WD 74gb Raptors Raid 0
    2 x Samsung 1TB @ 2TB Raid 0
    Thermaltake Armor case
    Thermaltake 850w pwr supply
    Koolance Exos water cooler

  14. #1289
    Xtreme Addict
    Join Date
    Aug 2006
    Posts
    1,557
    try the ram at a higher speed i got that set to 1266 6-5-6-16



  15. #1290
    Dave's Mentor!
    Join Date
    May 2007
    Location
    montreal
    Posts
    5,217
    bbc335 you better off with the gskills 7200 pi cas 4
    if you can get to higher fsb you be better though

    maximus IV extreme gtx580
    gigabut p67-ud7
    p67 sabertooth
    2500k+2600k
    antec 1200watt
    EVGA classified 760
    920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
    OCZ3RPR1866LV6GK hypers
    dfi ut p35 rampage extreme
    gigabut p35c-ds3r bios suks
    gigabut x38-d6q dead thank god
    ballistix 8500 1240mhz@2.02v

  16. #1291
    I am Xtreme Ket's Avatar
    Join Date
    Apr 2004
    Location
    United Kingdom
    Posts
    6,810
    Try setting 4-4-4 sub timings then reducing TRFC.

    "Prowler"
    Asrock Z77 Extreme6 | i5 3570k @ 4.5GHz 1.18v | 2x4GB PC12800 Ripjaws @ 1866MHz 10-10-10-15 1T 1.55v | Gigabyte GTX980, custom cooler @ 1.5GHz / 7.6GHz | Xonar DX 7.1 | 2TB Barracuda | 2x Sony Optiarc | Corsair 850w HX

    Cooling:

    3x Coolermaster Sickleflow 120mm 70CFM fans | Modified CoolIT ECO sealed loop CPU cooler | Custom made "The Judge" VGA VRM heatsink

    Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread

    (\_/) This is Bunny.
    (+.+) Bunny is dead.
    (^ ^) Copy and paste Bunny into your sig to create an army of BUNNY ZOMBIE MINIONS!!!

  17. #1292
    Xtreme Addict
    Join Date
    Aug 2006
    Posts
    1,557
    those tracers are some of the best clocking 2x2GB sticks out there i would keep those



  18. #1293
    I am Xtreme Ket's Avatar
    Join Date
    Apr 2004
    Location
    United Kingdom
    Posts
    6,810
    If you don't want to keep them... give them to me

    "Prowler"
    Asrock Z77 Extreme6 | i5 3570k @ 4.5GHz 1.18v | 2x4GB PC12800 Ripjaws @ 1866MHz 10-10-10-15 1T 1.55v | Gigabyte GTX980, custom cooler @ 1.5GHz / 7.6GHz | Xonar DX 7.1 | 2TB Barracuda | 2x Sony Optiarc | Corsair 850w HX

    Cooling:

    3x Coolermaster Sickleflow 120mm 70CFM fans | Modified CoolIT ECO sealed loop CPU cooler | Custom made "The Judge" VGA VRM heatsink

    Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread

    (\_/) This is Bunny.
    (+.+) Bunny is dead.
    (^ ^) Copy and paste Bunny into your sig to create an army of BUNNY ZOMBIE MINIONS!!!

  19. #1294
    Registered User
    Join Date
    Dec 2007
    Posts
    17

    Wink

    Quote Originally Posted by Ket View Post
    If you don't want to keep them... give them to me

    Its not that I don't want to keep them!

    The problem is whether or not I can bring myself to trade a working set of 2x1gb Crucial Ballistix Tracers that will do q6600 @8x430 1075mhz @ 44415 all day at 2.2v with the lowest 24/7 Everest memory latency score I have to date of 49.5.

    Haven' t decided yet still testing the 2x2gb Tracers.

    However I'm leaning toward sending the 2x2gb back. Here's why, I don't wont to have only one decent pair of ram around. If these new buggers fail and they will, I will be hanging out Zippidy Dodah waiting on Crucial to replace them with no ace in the hole backup.

    My thoughts, keep my hot rod 2x1 gb (Known Quantity)

    Send the 2x2gb tracers back, get the gskill 8500 I linked to in my last post and test them out versus the 2x2gb tracers. If they are better their keepers, not as good back they go and I can then get a set of the 2x2 gb tracers. In the meantime I still have my ace in the hole 2x1gb hotrods on standby. With the option of keeping my other bad set of 2x1gb Tracers 16fd3s and trying to replace the one bad stick with one from one of you kind Chuckle heads or swap them with Crucial for the new 2x1gb tracer 8500


    BTW, The only way I could get the Refresh Cycle Time (trfc) below 45 was set FSB TO NORTHBRIDGE strap to 333 and set memory to 860mhz running @ 44415 with Everest memory latentcy of around 56.8. the lowest i could set trfc to was 42 on asus p5k deluxe bios. Next lowest setting was 35 and it would not post @ 35 however it would go down to 36 using memset So far I cant run any other speed above 860mhz without setting trfc to auto and it then SPD's to 51 after that I'm able to get it down to 46 with memset. As i mentionted before with my old 4x1gb 8500 Tracers I was running subtimings of 3 30 3 3. From 30 to 51. Wrong direction

    What's up with this massive "SPD" Refresh Cycle Time (trfc) spd of 51?
    I'll ask again for you guys with 2x2gb ddr2, Is this normal for all 2x2gb ddr2 ram?
    Last edited by Bcc335; 02-20-2009 at 12:08 PM.
    Q6600 on Asus P5k Deluxe bios 0404
    Dualboot WinXPsp3/Win7 64
    EVGA GTX 580 & XFX 8800 GTS 640mb PhysX
    4gb 8500 Crucial Ballistix Tracers
    2 x WD 74gb Raptors Raid 0
    2 x Samsung 1TB @ 2TB Raid 0
    Thermaltake Armor case
    Thermaltake 850w pwr supply
    Koolance Exos water cooler

  20. #1295
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,000
    A high tRFC is normal for 2GB sticks.
    Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
    Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X

  21. #1296
    Xtreme Member
    Join Date
    Jan 2006
    Posts
    226
    G.Skill pc8000 HZ is some good memory
    I did get one pair of them couble of days ago, will test them hard tonight
    1.pc: Evga 4way, 980X, 3x5870, 3x2 1600mhz GT
    Storage: 3xOcz Vertex 1, Vertex 2 64gb and 2x150gb Raptor. -Updating-

  22. #1297
    Xtreme X.I.P.
    Join Date
    Oct 2006
    Posts
    1,260
    Quote Originally Posted by The Water Dog View Post
    G.Skill pc8000 HZ is some good memory
    I did get one pair of them couble of days ago, will test them hard tonight
    U bet Glad I have another kit coming
    --->TeamPURE<---

  23. #1298
    Xtreme Cruncher
    Join Date
    Jun 2008
    Location
    pacific NW usa
    Posts
    2,721
    Shiranui Gen An,thanks for the UT-P35-TR2 link,i just purchased myself one of these bad boys.finally ill be getting some decent bandwidth.
    _________________________________________________
    ............................ImAcOmPuTeRsPoNgE............................
    [SIGPIC][/SIGPIC]

    MY HEATWARE 76-0-0

  24. #1299
    Dave's Mentor!
    Join Date
    May 2007
    Location
    montreal
    Posts
    5,217
    Quote Originally Posted by radaja View Post
    Shiranui Gen An,thanks for the UT-P35-TR2 link,i just purchased myself one of these bad boys.finally ill be getting some decent bandwidth.
    you shoulda got the ut p45 its even better with quads
    the p35 is a great board just wont go 500fsb+ with quads
    enjoy the bandwidth you should get @ least 500mbs more than with the gigabut

    maximus IV extreme gtx580
    gigabut p67-ud7
    p67 sabertooth
    2500k+2600k
    antec 1200watt
    EVGA classified 760
    920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
    OCZ3RPR1866LV6GK hypers
    dfi ut p35 rampage extreme
    gigabut p35c-ds3r bios suks
    gigabut x38-d6q dead thank god
    ballistix 8500 1240mhz@2.02v

  25. #1300
    Xtreme Cruncher
    Join Date
    Jun 2008
    Location
    pacific NW usa
    Posts
    2,721
    i plan on using my UD3P for my quad for now and the UT-P35-T2R will use my E8500.so i think ill be just fine.cause the kind of bandwidth im talking about comes from very high fsb speeds and thats too hard with a quad no matter what board im using.
    _________________________________________________
    ............................ImAcOmPuTeRsPoNgE............................
    [SIGPIC][/SIGPIC]

    MY HEATWARE 76-0-0

Page 52 of 95 FirstFirst ... 2424950515253545562 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •