Project: TimeCrunch Used MM UFO oO

[scottc19]

So I apologize in advance for my work log. This project is time limited, if you didnt get it from the name I have to finish this this week so that I can go back to the school at UW for my second year.

Anyway project is mostly from used items that I picked up, IE used MM-UFO older solid style, I bought all of my radiators used, expect for the thermochill I had that from my last mm case.

One goal in this build was not to drill ANY holes, look at my ingenious pump mounts.

LIST:
CASE:
MM-UFO brushed aluminum older style not hyper modular -used

Radiators:
Thermochill PA120.2 -I had this
HW labs double BIEII? -used
HW labs singe BIE? -used
HW labs Singe BIP?-used
Swiftech mcp120 -used

PUMPS:
Swiftech mcp350 w/oclabs top
Swiftech mcp355 w/aphla whatever top
I bought another used mcp355 that was covered in glue and leaked I tried to fix it and well, look down at the pics and you will see what happened to it.

BLOCKS:
mcw60
mcw30 -used
dtek fuzion v1 w/backplate

BARBS:
all 1/2 - mostly all used, but I replaced used orings

TUBING:
tygon r-3400 7/16id

4 red cold cathodes w/soon to have sleeved/heatshrinked powersupplies
maybe 2 uv cc over motherboard, to accent.

MM fan harddrive rack -red

10 Yate loon 120mm SM -I got one spare (maybe I will make it into ram cooler)

HARDWARE -mostly all used from last build,except new processor

500gb samsung spinpoint
150gb raptor w/window

DFI p35-2r Lt one, whatever its called

e8600 -new! -shooting for 4.5+

4gb 1066 patriot ram - just got the rma back for 2gb of it for the second time, hopefully now it will work - I hate Patriot :/

Voltmodded 8800gt, this is very ugly looking, I bought it from a xs member back in the day that tried to volt mod it and failed and killed the card. I bought that card for $40 and soldered it for 4+ hours and now it works Its ugly looking as I was just getting into soldering.. -now I have a weller ws51
1.55v lol it wasnt the best overclocker ram was at 1.21 I think I dont really remember. Clocks are 840 core, 2200 Shader, 950 mem. I think these are right, but this is just from memoery so dont shoot me if that shader is really far off. But I think the rest are close

Paired with a 24" flat screen monitor


Still waiting on a lot parts, most should get here tomorrow, damn weekends and no shipping lol

I know this a crude worklog, I just thought I would throw it up here and see what happened.

I am going to cut and sleeve all the fans together, I have filters for all intake fans 6 total.
Basically will update tomorrow with whats going on, If you would like any more pictures please ask, these are crude at best, I shot them quick and I don't think the auto focus was on for half of them

I have a gigantic mess, thats what happens with my projects when I get into a hurry and have a dedicated table.

See big, mess with crappy picture


The front



Side



rad1



rad2



rad3



rad4



rad5



mess



tap set - handy for used radiators I tapped all the used ones to 6-32. kept thermochill that way it was with #6 sheet screws



some yate loons



motherboard in progress



otherside of case



pump mount 1 brilliant I tell you



pump mount 2 -yes ingenious I know



both pumps in perspective



Heres the pump that I killed



Another case view



My handy fill valves as no reservoirs will be used in this build



12 feet of pretty tygon r-3400 tubing for my two loops

[scottc19]

Update, all radiators mounted except for thermochill, my screws were too short. Almost all the fans have been sleeved, my first time sleeving, but turned out ok .

[BlueAqua]

Looks like it's coming along well. Putting it together is a like a huge puzzle isn't it?

[mpower1001]

How old is that MM

[scottc19]

How old is that MM

Not sure, I bought it off a member here on the board, but it appears to be of the originial design, so I am guessing it was one of the first production type off mm ufos?

Looks like it's coming along well. Putting it together is a like a huge puzzle isn't it?

Yeah it is, especially fitting two differnt rads where a tripple should go that was a really tight fit.