I can confirm that the TOP bioses and cat 8.12 is not working together.... But the 8.11 work`s perfectly fine
I can confirm that the TOP bioses and cat 8.12 is not working together.... But the 8.11 work`s perfectly fine
Game:Evga Sli LE, Xeon 3540, Kingston 3x2gb 2000mhz cl8, XFX GTX295, Silverstone Strider 1500w, Intel X25-M 80gb, @ Custom H2O
Htpc: Asus P7P55D-Evo, Core i5 760, 8gb Kingston Hyper-X cl9, Asus GTX465, Silverstone Strider 850w, Ocz Vertex 3x30gb + 4,5TB
cat 8.12 with the top bios works fine here
i950 (3035B684)
Gigabyte EX58A-UD3R
3x4GB G.Skill PC3-12800 7-8-7-24
HIS Radeon HD 6970 2GB & Dell 3007WFP-HC
Asus Xonar DX
128GB C300, Velociraptor & Sammy F3's
Corsair AX850W
Windows 7 Ultimate x64 SP1
I have a Real Asus Top HD4870X2 and it works fine with 8.12
Have a question. Will recieve a Club 3D 4870x2 on monday or tuesday that can do 860 on core with normal roomtemp and 870 benchable with some colder air. U think i will gain anything if i change bios ?
[SIGPIC]http://techsweden.org[/SIGPIC]
Gigabyte Z87X-OC, Haswell 4770K, 8GB Team Group 2666mhz, Asus HD7970
Has someone the palit or gainward golden sample Bios??
Maybe this ones have the voltaje changed to 1,35v without modding it in Rbe.
I would to try in a regular sapphire.
Last edited by menko2; 12-28-2008 at 02:54 AM.
Asus TOP and 8.12 are ok here...
single and CF...
[SIGPIC][/SIGPIC]
I flashed the TOP BIOS and was able to run with the 8.12s....unfortunately I haven't been able to get a decent OC on my card yet. I'm running my Sapphire 4870X2 on water with a full coverage XSPC Delrin block, and temps are great.
I'm going to attempt to edit the TOP BIOS to higher voltage....we'll see what that yields.
Will this BIOS actually allow 1.35V as shown in the RBE 1.18 BIOS table?
Q6600 G0 @ 3.8 (475x8) 1.496V || ASUS Maximus Formula X38 || 4x2GB Geil Evo One DDR2-950 5-5-5-15 ||
Sapphire 4870X2 857/1000 || XSPC Delrin full coverage block || MCP655 || D-Tek Fuzion Nozzled ||
Black Ice 480GTX 8 120mm Yate Loon push/pull || Silverstone DA850 PSU 70A +12V || Auzentech Prelude ||
Vantage P15071 in Vista x64
Changing the voltage in the bios does nothing without a hardmod. At least it didn't on my Visiontek card. I tried it with the stock bios and the Asus TOP bios. The voltage remained at stock both ways, as confirmed by GPU-Z and the voltage read points on the back of the card..
--Matt
My Rig :
Core i5 4570S - ASUS Z87I-DELUXE - 16GB Mushkin Blackline DDR3-2400 - 256GB Plextor M5 Pro Xtreme
Last edited by binormalkilla; 12-30-2008 at 09:12 AM.
Q6600 G0 @ 3.8 (475x8) 1.496V || ASUS Maximus Formula X38 || 4x2GB Geil Evo One DDR2-950 5-5-5-15 ||
Sapphire 4870X2 857/1000 || XSPC Delrin full coverage block || MCP655 || D-Tek Fuzion Nozzled ||
Black Ice 480GTX 8 120mm Yate Loon push/pull || Silverstone DA850 PSU 70A +12V || Auzentech Prelude ||
Vantage P15071 in Vista x64
All right I flashed the TOP BIOS again last night and began benching. I'm Vantage stable at 862/1000. I'm going to test for further stability in COD:WaW today.
Q6600 G0 @ 3.8 (475x8) 1.496V || ASUS Maximus Formula X38 || 4x2GB Geil Evo One DDR2-950 5-5-5-15 ||
Sapphire 4870X2 857/1000 || XSPC Delrin full coverage block || MCP655 || D-Tek Fuzion Nozzled ||
Black Ice 480GTX 8 120mm Yate Loon push/pull || Silverstone DA850 PSU 70A +12V || Auzentech Prelude ||
Vantage P15071 in Vista x64
Ok, maybe someone here can help me. I DL'ed the TeamAU files from earlier in this thread and flashed them to my Visiontek 4870x2 with atiflash 3.6 in dos. Rebooted and when I get to my Raid information screen right after ctrl i to edit raid it just freezes. Can not get into bios, can not get f8 or print to access my boot order. Nothing. Clear CMOS and everything is huncky dory until I enable raid again. Used NTFS Reader to get to my backup drive and copied my original bios files to my flash drive and reflashed those and everything is working fine. What would cause a conflict between the raid controller and the asus bios? Should I try the unmoddified bios? I don't think it is a driver conflict as it doesn't even get to the loading process.
Any ideas?
Heatware: Broken
Ebay Feedback: Brokennails
Ich9r on my Blackops.
Heatware: Broken
Ebay Feedback: Brokennails
The teamau bios files are not good take the original bios from your card and mod them with rbe to get the asus top settings i ccc and then flash that on your card
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
So basically change 10,11,and 12 to 800, 915; leave voltage at 1.25v.
This will give make my max's in CCC 900/1000? Or are you saying to change it in the additional features under method 1 hash.
Just making sure before I flash.
Heheh, reading is my friend. changed the signiture in RBE and now have higher limits in CCC. For now I just changed the core to 790,915.
Last edited by Broken; 01-03-2009 at 07:28 AM.
Riska, whats wrong with the files i posted?
Sorry havent been watching this thread
great bios, I am able to hit 850 core and 1050 mem
i have Club3d 4870X2 stock 750/900
if i get these 800/1000 biose's, how much will i gain in games? and is the asus 4870x2 TOP cooler just like the cooler on any other 4870X2 cards?
will the card be much hotter?
thanks
Intel i7 2600k@4.5Ghz, Asus P8P67 Deluxe, 8GB Corsair XMS3 DDR3 1600Mhz, Noctua NH-D14, Radeon 4870X2, Crucial M4 256GB SSD + 5 HDD, Asus Xonar D2X, ThermalTake TT 850W, Tagan A+ CS Monolize, Samsung T240, Logitech Illuminate+G9x, Windows 7 Ultimate 64Bit.
The TOP cooler is dual fan different design. It does not seem to be any more effective than the stock HSF assembly though it is quieter.
Bookmarks