Alright, I've installed the 1201 of 4 machines now and just off the top using EZFlash on over a defaulted bios will not require a cmos reset after flashing.
I haven't done any clocking yet, but thought I'd mention it.
Alright, I've installed the 1201 of 4 machines now and just off the top using EZFlash on over a defaulted bios will not require a cmos reset after flashing.
I haven't done any clocking yet, but thought I'd mention it.
GB 790XTA UD4
GSkill Pi Black 2000 Cas9
ASUS 4870
Enermax Revolution 1050+
http://www.heatware.com/eval.php?id=67661
I guess some boards are just beyond help
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
Well, after badgering Asus something chronic about the P5Q series BIOS, it looks like they are not going to be doing too much more with it. There may be an odd new BIOS here and there to improve memory compatibility more, and perhaps address the 400 strap issues, but thats about it. Here is the responce from Asus regarding both PCI-E and 400 trap issues;
I'm sorry for my late reply.
Here is the latest BIOS 1306 availalbe now: http://dlsvr.asus.com/pub/ASUS/mb/so...S-PRO-1306.zip
In fact, we have no such BIOS aimed at improving PCIE overclocking capability.
Sorry for any inconvenience.
Sincerely and best regards,
Lyn_Quan
Notice how they say nothing about the 400 strap problems.. maybe some of you guys want to send them an email telling them in detail about the narfed 400 strap?
Last edited by Ket; 09-01-2008 at 04:56 AM.
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
Big Lar - are you using 1:1 FSB:RAM ratio? If so you can't go below PL10. If not, what vNB are you using?
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
Thanks for the info I am running 1:1 as I only have Pc8000 ram. Settings are below, guess I need to get some better ram.
FSB Ratio; 333
VTT; 1.30v
NB; 1.32v
Dimm; 2.0/2.02 no difference
CPU; 1.33125v = 1.248v ish load
LLC; disabled
pll; 1.56v
SB; 1.20v
Pcie; 1.60v
gtl 0/2; 0.665
gtl 1/3; 0.675
nb gtl; 0.640
dram static; disabled
dram read training; disabled/auto, not much diff.
mem oc charger; disabled
Ai Clock Twister; Medium
CPL; 10
Pullins; disabled, going to work on these.
Larry
ps. any comments feel free to advise
Q9650
Asus P5Q-D Bios 1406
280 GTX FC Block
2x2gb OCZ Flex II PC2 9200
Water Cooled/ Iwaki MD20/ D-Tek Fuzion
XFX 850 Watt
OWC SSD
thanks alot bro works great!
Eh, I run it Disabled as my cpu does not seem to be holding me back voltage wise, I've tried with llc enabled and up to 1.35v. I can get 3880/39xx with it but not stable, I think the L2 cache can't keep up. I'm happy with the clock, just looking for more bandwidth.
Larry
Q9650
Asus P5Q-D Bios 1406
280 GTX FC Block
2x2gb OCZ Flex II PC2 9200
Water Cooled/ Iwaki MD20/ D-Tek Fuzion
XFX 850 Watt
OWC SSD
I'm using your modded 1201 BIOS for the Deluxe and I can't seem to get the E-Z Flash tool to work. The tool starts up but halts when it searches for locations for BIOS files. Other than that the BIOS seems to work great, and I appreciate your hard work on these.
- i7 920 D0 // eVGA X58 SLI // 12GB G.Skill Ripjaws // HD6950 (6970 BIOS)
- Apogee XT // MCP655 // Thermochill PA120.3 // CM HAF 932
- OCZ Vertex 3 MI edition // ASUS Xonar DX // Corsair TX850
- HTC Incredible - Uber Kingdom Revolution ROM
thats probobly true
not alot of P5Q owners out there, so its difficult to get info from other users.
the 400 strap works as of bios v1104, but of course it is slower then 333 strap. i can do 510fsb easily on a 333 strap, the 400 strap doesnt take me further. then again how many P5Qs are running 510fsb 24/7 stable?
the "1200mhz no boot bug" does exist on the P5Q, 1199mhz is 24/7 stable tho
your 1306 mBios appears to be/act identicle to the official 1306, no better no worse, identicle performance.
again, thank you for the effort
GB 790XTA UD4
GSkill Pi Black 2000 Cas9
ASUS 4870
Enermax Revolution 1050+
http://www.heatware.com/eval.php?id=67661
Cool, I'll give it a shot after I finish a WU.
- i7 920 D0 // eVGA X58 SLI // 12GB G.Skill Ripjaws // HD6950 (6970 BIOS)
- Apogee XT // MCP655 // Thermochill PA120.3 // CM HAF 932
- OCZ Vertex 3 MI edition // ASUS Xonar DX // Corsair TX850
- HTC Incredible - Uber Kingdom Revolution ROM
This Ket P5Q-E bios just saved this cpu and mobo a trip to the trash can. I am now priming at the lowest vcore yet for this garbage cpu and is complete prime stable 2hrs in...which beats my old record of 1 second prime stable.
Also, it looks like I need a vdrop pencil mod. I set my vcore to 1.4825 in the bios, and in cpuz I get 1.416v idle and load. LLC is disabled as when I enable it, it is complete unstable.
GB 790XTA UD4
GSkill Pi Black 2000 Cas9
ASUS 4870
Enermax Revolution 1050+
http://www.heatware.com/eval.php?id=67661
Weird, I set LLC to enabled and don't get any instability at all. Almost no vDroop either.
- i7 920 D0 // eVGA X58 SLI // 12GB G.Skill Ripjaws // HD6950 (6970 BIOS)
- Apogee XT // MCP655 // Thermochill PA120.3 // CM HAF 932
- OCZ Vertex 3 MI edition // ASUS Xonar DX // Corsair TX850
- HTC Incredible - Uber Kingdom Revolution ROM
_____________________________________________
Rig = GA-P67A-UD3P Rev 1.0 - 2600K @ 5.2~GHz 1.5v~, 1.489~v Under Load - Swiftech Water Cooling - 2 X 4GB Corsair DDR3 2000Mhz @ 1868MHz~ 9,10,9,27 @ 1.65v~ - Asus 6970 @ 950MHz / 1450MHz - 3x Western Digital RE3 320Gb 16Mb Cache SataII Drives in Raid0 - Corsair HX 850w Power Supply - Antec 1200 Case - 3DMark 11 Score = P6234 - 3DVantage Score = P26237
From day one i stated that on the P5Q Deluxe .. i have LLC enabled and hardly any Vdroop....
**PC Specs**
- Intel E8600 E0 @ 4.2ghz @ 1.33v full load (Vid 1.25) Batch # Q822A441
- Asus P5Q Deluxe P45 (Bios 1402)
- T-Right Ultra 120 Extreme (lapped), 1 x Noctua P12
- 1 x ATI HIS 4850 @ 700/1100
- 4gb G.Skill F2-8000CL5D-2GBPK @ 1008mhz
- TT ToughPower 650w
- 1 x 640GB Seagate Sata II
- Antec 900 Case
- Vista 64bit SP1 and All Useful Updates
**My Template for 4.2ghz speed**
[URL=WILL MAKE ONE UP SOON[/URL]
Orthos Prime (Blend) Stable 16hrs
Glad it helped tho I really don't know how. I can run just fine with LLC enabled, but it seems that I need to run a higher voltage to duplicate my same OC, kinda weird.
The 400 strap does make a slight difference on my board, tried my usual just about spd timings with the 400 versus my usual 333 and failed in 10 runs of Linpack. I changed Read Training to Auto from Disabled and passed fine with about the same bandwidth. Kinda different.
Larry
Q9650
Asus P5Q-D Bios 1406
280 GTX FC Block
2x2gb OCZ Flex II PC2 9200
Water Cooled/ Iwaki MD20/ D-Tek Fuzion
XFX 850 Watt
OWC SSD
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
Last edited by ReverendMaynard; 09-01-2008 at 11:08 AM.
GB 790XTA UD4
GSkill Pi Black 2000 Cas9
ASUS 4870
Enermax Revolution 1050+
http://www.heatware.com/eval.php?id=67661
Reading some of the banter I figure I may as well add my input for the P5Q Pro, all the testing I have done so far shows none of the discussed issues over the last page or so. However I can join the vdroop boat. If I set 1.475v in BIOS CPU-Z 1.46 reports 1.456v. Not what I would call a terrible vdroop as 1.456v is rock solid, but still, irritating all the same
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
_____________________________________________
Rig = GA-P67A-UD3P Rev 1.0 - 2600K @ 5.2~GHz 1.5v~, 1.489~v Under Load - Swiftech Water Cooling - 2 X 4GB Corsair DDR3 2000Mhz @ 1868MHz~ 9,10,9,27 @ 1.65v~ - Asus 6970 @ 950MHz / 1450MHz - 3x Western Digital RE3 320Gb 16Mb Cache SataII Drives in Raid0 - Corsair HX 850w Power Supply - Antec 1200 Case - 3DMark 11 Score = P6234 - 3DVantage Score = P26237
It does here, I have an E8400 that does 4ghz at 1.21Vcore on the DLx ( no GTL tweaks) I cannot get it stable with LLC enabled on the E, popped the CPU back into the Dlx, set 1.21, enabled LLC , stable linpack puppy...
With LLC on, I get erratic behaviour, even non OC'ed... on the E board... which is a bummer
Sorry to hijack ya thread Ket
Last edited by Leeghoofd; 09-01-2008 at 02:23 PM.
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
Bookmarks