Modded ASUS P5Q/Pro/Deluxe/Premium BIOS

[truehighroller]

Yah I think it depends on what you are doing/ going to exc. After 1103 the boot block doesn't change so I don't even waste my time after that one. I have before so I know it isn't going to solve my issue.

[Toysoldier]

All together 1.7Gb roughly. About 167Mbs a piece. You tube sucks at uploading bad.. I am just trying to do one file at a time here not all at once or anything.

Edit: I did rar the main one and it was 1gb.

I have sent you a PM

[truehighroller]

I have sent you a PM

I sent you a couple. I am going to sleep now and thanks.

[Dee]

How much is 1 notch?

EDIT: Flashed to m1402

[wongnog]

P5Q-E 1402 mBios running fine here. I confirm that 1 notch (although not 2) lower vCore in bios works the same for me after the update. It's probably from better vDrop/vDroop, but I didn't check the actual values.

Same here, P5Q-E with m1402 and very happy. I was Intel Burn Test stable for 20 runs in m1306 but Prime95 surprisingly failed after a couple minutes. m1402 tho is rock stable, might even be 1-2°C lower temps too if that is at all possible.

[Dee]

I guess it's possible if it's using less voltage.

[Ket]

All together 1.7Gb roughly. About 167Mbs a piece. You tube sucks at uploading bad.. I am just trying to do one file at a time here not all at once or anything.

Edit: I did rar the main one and it was 1gb.

Download kates video converter you will be able to turn that nasty 1.7GB avi movie into about 200MB mpg

[truehighroller]

Download kates video converter you will be able to turn that nasty 1.7GB avi movie into about 200MB mpg

Thank you. I like that prgram. I am uploading the smaller one now and will message you with the login info for downloading it when it is done.

[BeastNotro]

Ket

This program seems to be what i was looking for as well for movies..... Kate's Video Converter 4.0.15 ... awesome and that is the latest version too.

[Dee]

0.00625v. But tbh I don't think the end result is any different from 1306m: the lower bios_vCore compensates for the vDroop improvement, and I get the same final load vCore. 1402m didn't really help or hurt for me.

OK, thanks. I noticed certain improvements (small ones) in the 1402's. When I loaded up Easy Flash I could browse through my HDD's now, also when the BIOS is finalising a flash there's a green progress bar. I saw this because I flashed to 1306 and back to 1402 again.

[truehighroller]

I sent you the info via pm Ket. If any one else wants to see my issue in action just ask and I will pm you as well.

[hema]

P5Q with 1307 mbios
very stable version
I love the new logo design
the modded version solve the original beta version mobo logo prob.
so thanks ket

[truehighroller]

Hope he is ok he hasn't messeged me back or anything yet.

[Dee]

LLC disabled is horrible for me. I set it to 1.39 and it dropped to 1.35 under full load.

[ReverendMaynard]

Leeg and Rev: it might be my imagination, but P5Q-E LLC is now stable for me with bios 1402m... actually, even more so than without LLC, at the same vdrooped load voltages

If someone can confirm, I'd like to volunteer these:

I'll flash when I get home tonight and let you know. Thanks for the heads up.

[ReverendMaynard]

LLC disabled is horrible for me. I set it to 1.39 and it dropped to 1.35 under full load.

That's horrible? lol.

I set mine to 1.5v and get 1.416v load.

[ReverendMaynard]

And really, as long as you can compensate for vDrop without stability being affected, it's no big deal. But with the P5Q-E, I'm finding that there's more to LLC/Non-LLC than the final load vCore...

It'd be cool if I didn't have to set my vcore at 1.5v in the bios to achieve 1.440 idle. that's my only complaint about having LLC disabled. The .024v droop isn't all that bad

[psychok9]

Here are the new mBIOS builds. Once PMP gets back to me with the changes made by Asus the readme files will be updated to include than info as well.
P5Q Dlx mBIOS 1402

Sorry, what's custom P6 table?
What's the difference between the PMP's modded bios and yours?
Thank you very much for your work .

[Ket]

No need to worry highroller just been completing some lil upgrades to my system and ordering some new memory with micron d9s

[Dee]

That's horrible? lol.

I set mine to 1.5v and get 1.416v load.

Why post a "LOL"?

[Ket]

Hes laughing at how bad his vdroop is. After all, some bad things you can only laugh at to stop yaself from crying

You should really ramp up your vdimm as well to say 2.1v and see how far those ballistix will go

[truehighroller]

Just pmed tell me if that linky works.

Edit: I just tried it myself and it works that way nicely.

[ReverendMaynard]

Why post a "LOL"?

Just trying to make light of the situation.

Hes laughing at how bad his vdroop is. After all, some bad things you can only laugh at to stop yaself from crying

Well now, I don't think I'd cry over some bad hardware lol, we all know it's like rollin' dice

[Dee]

Hes laughing at how bad his vdroop is. After all, some bad things you can only laugh at to stop yaself from crying

You should really ramp up your vdimm as well to say 2.1v and see how far those ballistix will go

I'm not sure. Having had too many kits of Ballistix die in the past (4 or 5 kits in the last 4 years) I'm slightly cautious about that. They are doing as well as they can without putting them on the next setting which is something like 1154. At this current speed (1040) they're probably close to being maxed out. By the way, these are the "crappy" single sided Ballistix that everyone hates. Infamous nasty batch, too 97432. For me they've been great, though. Never taken them past 1.90v for longer than a short time, and that was just to rule out lack of RAM voltage when stabilizing a CPU overclock on Prime Blend.

I'm just trying to work out a deal with a guy on here for some older Ballistix 8500, just waiting to hear back from him. If I get those I'll shoot for the 1154.

Just trying to make light of the situation.

OK, I thought you were picking on me. "My vdroop's worse than yours! I win!"

Just messing with you anyway. I though my vdroop was bad but yours is terrible, I agree.

[Ket]

Dang that sucks my RAM issues should forever go away in a few days, I ordered some CellShock PC8000 that has Micron D9s