Last edited by bentleya; 08-17-2008 at 05:25 AM.
Thx for sharing mate
It looks GOOOODDDDD
So they used the original Edge base. This should make it cheap and hopefully will perform on par with the Edge.
The base is different. Looks like a stepped base.
Yeah I mean the other side so I guess I should have said copper fins. Hmm what are the opinions on the base? I was under the impression it would be better to have maximum contact with the IHS.
NO problemOriginally Posted by Nosfer@tu
Thx for sharing mate
It looks GOOOODDDDD
Only 15 of this blocks successfully made all sold now, bottom is slitghly different, but deleta V3 on the way to take off where edge left
Yes it has more of a stepped base
i was hoping it had the same big circle area for maximum contact with the cpu
oO no photo of a full assembly?
Intel Q6600 @ 3.6GHz
Asus Blitz Formula SE
OCZ ReaperX PC6400 2x2GB
Sapphire HD4870x2
X-Fi Elite Pro 7.1 & Logitech Z5500
Samsung Spinpoint T166 500GB
Samsung 226BW
Zalman ZM1000-HP
Watercooling
Loop 1: DDC3.2 (XSPC Restop), Fuzion v2, BIGTX360 (6x S-Flex F)
Loop 2: DDC3.2 (XSPC Restop), EK 4870x2, TFC X360 (3x S-Flex F)
Loop 3: to come
[DarthBeavis] "I am gonna try to mod one of these into my wife so can get an early warning of when she gets angry . . ."
no not yet Giannis86 just taken rig off water yesterday so i can mod my D5's Paint my rads, paint my fusion Mounting plate, as well install more compression fittings and move done to 3/8" tubing
It IS good - better than V2 insome casesThx for sharing mate
It looks GOOOODDDDD
~Bex
PROJECT :: The Xtreme (WET) Dream!!!
PERSONAL H2O BESTS :
E8600 @ 4.8GHzE6750 @ 4GHz
PERSONAL AIR BESTS :
Sempron140 @ 4Ghz (Stock Cooler)i7 3960x @ 5.4ghz (Air Cooler)
Bex : "Who said girls can't play PC games or overclock!? Do I look like your imagination!?"
Aaron : "TBH, a girl doing all that is a pretty perfect girl!"
Swift_Wraith : "could someone please check bex for a penis?"
hi bex, nice of you to drop in, what do you mean better than v2 in some cases?
Awesome! They left out the acrylic for less chance of cracking after time, now it's a metal hold down plate and delrin top, wondeful! I hope that with this stepped base it'll perform even better than the old design...
Stepped is better than flat! This should be a good performer on current CPU's. May be an issue with the Nehalem...Only IMO...
Last edited by Mick64; 08-17-2008 at 11:36 AM.
System :- Gunmetal Antec P182 : Antec Quattro 850 : Asus P5E Deluxe : Intel Q9550 (E0) @ 4004MHz (8.5 x 471 FSB) 1.4 volts (VID: 1.3v) : 8Gb 1100 OCZ Gold XTC @ 942MHz 2.0 volts (5-5-5-15) : Gainward GTX 570 GS GLH (GPU: 800MHz, Shader: 1600MHz, Memory: 2000MHz) : 1x 128Gb Crucial RealSSD + Asus U3S6 (OS) : 1x 1Tb & 2x 500Gb Samsung Spinpoints (Storage) : Microsoft Windows 7 Home Premium (64bit) 
Cooling : 4x Sharkoon Eagle 2000's (Case) : 3x Scythe Gentle Typhoons (R120-T rad) : 4x Scythe Gentle Typhoons (RS 240 rad in push-pull) : Akasa Fan Control Pro : Stepped Aquacomputer Cuplex XT di : EK FC5X0 GTX GW - Nickel (GTX 570) : Swiftech MCP355 : 1x XSPC R120-T : 1x XSPC RS 240 : XSPC Bay Reservoir : XSPC 1/2" Tubing : Blue Feser One Coolant
Check out my water-cooling case design:- Here & Here
Find SketchUp Computer Components Here
Download my case design SketchUp files from Here
wound be nice if i could get my hands on a clear normal edge, to see if what difference it is,
as i could go and test then use martins results but it wound be unfair, as i have completely different setup
Agreed. The contact surface now may be too small for Nehalem.
On the xspc site it is named Delta V3.
what sort of performance are we likely to get out of this - doesnt it just look like the design of a normal air cooler, but water running over it (tightly spaced high density fins, not pins?).
just wondering..
Intel e6420 @ 440x8 1.425V 22/30C
Asus P5K-Deluxe WiFi
4Gb OCZ ReaperX
768Mb BFG 8800GTX
3x320Gb Seagate 7200.10 in RAID0
1x500Gb Seagate 7200.9
Audigy 2ZS
Thermaltake Mozart TX
Watercooling:
Thermochill 2xPA120.2 /Dtek Fuzion + 4.4nozzle / Petrastech DDC Ultra top pump / masterkleer tubing/8800GTX EK FC block.
this block is different design to the delta V3 i will post up the details of what is different soon, it looks the same but it is'bt
Very nice!
The biggest issues I saw with the V2 was the acrylic top and flat base, both are fixed in this iteration.
Looks really good. So many good blocks out there now to build systems around.
It is nice martin
been trying to get more info but this is what i know now, 36 made, 15 sold in the uk i have 1 and now where another 6 of them live.
i don't know what is happing with the other 21, i will send an email over to paul at XSPC to try get more info bout difference and so on
three reasons
Why not, Q6600 in the system..
Actually, that base is alot bigger than you think. The V2 is a full 2" diameter, so that step is probably plenty big enough...not sure though. I believe niksub1 determined about a 23mm square was perfect for todays processors.
martin how you know i got a Q6600
Better than the DD V2
And Delta V3 is a totally different block - newer version of the Delta although that's still a work in progress
~Bex
PROJECT :: The Xtreme (WET) Dream!!!
PERSONAL H2O BESTS :
E8600 @ 4.8GHz
PERSONAL AIR BESTS :
Sempron140 @ 4Ghz (Stock Cooler)
Bex : "Who said girls can't play PC games or overclock!? Do I look like your imagination!?"
Aaron : "TBH, a girl doing all that is a pretty perfect girl!"
Swift_Wraith : "could someone please check bex for a penis?"
Nice stuff, temps please
lol... This forum requires that you wait 70 seconds between posts. Please try again in 8 seconds.
*phone rings*
Friend: Do you have a spare PSU lying around?
Me: No why?
Friend: My PSU just blew up, I think the second 8800GTX might have been too much for it to handle
Me: what PSU was that again?
Friend: Antec 480w
Me:........
Posting Permissions
Reply With Quote
Bookmarks