Ambient temp was 32-35c
Ambient temp was 32-35c
eVGA X58 Classified E760
i7 920 @ 4.1
G.SKILL Ripjaws 6Gig
PNY GTX480
X-Fi Titanium
OCZ 60GB Vertex
OCZ 120GB Vertex
CORSAIR HX-1000
Win 7 pro 64
Now where does these heatsinks come from ?
Sorry for the OT.
500 fsb on a quad core... very good is this on water?
This is definitely pushing it.
Lets say I relax my voltages and run at 480 max, not pushing towards 500.
480 x 8.5 = still makes 4080.
My question is.... can the E0s overclock above 4.1 on air? (Vcore around 1.35) how about on water?
I am trying to figure out if there is an absolute need for the x9 multi to decide between q9550 and q9650.
Another question
since you are not using a really high fsb now,
would you recommend a rampage formula or a dfi lt x48 instead of the P5Q Deluxe?
Last edited by DiscoTech; 09-05-2008 at 05:06 PM.
E6600 (400*9)
P5W64 WS Pro
PC P&C Silencer 750W
Thermaltake Big Typhoon
2x1GB Team Xtreem DDR2 800 CL3
EVGA 8800 GTX
Opteron 165 (330*9)
DFI nF4 Ultra-D
PC P&C 510 SLI
Thermaltake Big Typhoon
2x1GB Crucial Ballistix z503
BBA x1900xtx
Q6600 3.6Ghz @ 1.276v | DFI LP LT P35 | Ballistix Tracer PC2-8500 600Mhz @ 2.074v | GeForce 260 GTX | Auzen X-Fi Prelude | PCP&C 750 | Arch Linux ~ WinXP
AMD Athlon 64 X2 3800 | DFI LANParty NF4 SLI-DR | 2x512MB G.SKILL PC3200 BH-5 | OCZ PowerStream 520W | Palit GeForce 9600 GT | Gentoo
Long Live DFI.
RIG 1 (in progress):
Core i7 920 @ 3GHz 1.17v (WIP) / EVGA X58 Classified 3X SLI / Crucial D9JNL 3x2GB @ 1430 7-7-7-20 1T 1.65v
Corsair HX1000 / EVGA GTX 295 SLI / X-FI Titanium FATAL1TY Pro / Samsung SyncMaster 245b 24" / MM H2GO
2x X25-M 80GB (RAID0) + Caviar 500 GB / Windows 7 Ultimate x64 RC1 Build 7100
RIG 2:
E4500 @ 3.0 / Asus P5Q / 4x1 GB DDR2-667
CoolerMaster Extreme Power / BFG 9800 GT OC / LG 22"
Antec Ninehundred / Onboard Sound / TRUE / Vista 32
right you all know the q9650 won't be fully surrported till the next bios if not later so as the p5q boards still not fully upto speed nearly there. But still a few problems. I think we will make the 475-485 fsb with 9x multi. Getting mine now, it's been held at citylink since Wednesday so I can't wait to give her a blast using mx-2. So overclocking from the the get go
hang on was that 4.2! Yes it was so let's see. Still some head room left to overclock her. 16 hours prime stable just need to drop voltages and fine tweek ram timings.
its much faster clock for clock, the 9650 @ 3.8 beat my 6600 @ 4.005 in w-prime speed by .1s. add in the head room to go to 4.1-4.15 24/7 on a good mobo and youve got a winner
evil-98's q9450 just died with, 1.408v. I hope you enjoy wasting your 600$ just so you can say you got yours faster than everyone else.
^guys lower the vcore and raise the cpu vtt
my q9650 stable @ v1.250/cpu vtt @ v1.275 @ foxconn mars bios
when i got this cpu the box was all factory sealed but the inside plastic seals were all broken.. was about to rma it back to newegg but im content now that the oc is good
Last edited by NapalmV5; 09-07-2008 at 04:20 PM.
@ mars.. the only option after 1.200 is 1.275
^same here v1.25 max
1.300vcore/1.425vtt @ bios
Last edited by NapalmV5; 09-07-2008 at 05:49 PM.
1.350vcore/1.500vtt @ bios
thermalright ifx14/75 F ambient
next: im gonna attempt a mobo mod and shoot for 500fsb.. if successful will post it
idk.. im still going for higher.. not done yet
only .075vtt increment @ mars
but first i gotta take off some of the burden of the chipset.. 8800ultra -> 8800gt + mobo cap mod
sniipe dogg that's suck. I am takeing your advice unlike someone else ^^^^^^ I've dropped my vcore to 1.39 seems to be stable yet to run prime I'll do that tonight when I get home. These newer chips must be able to take 1.45 but about 1.40 tops for 24/7. But it's just luck of the draw if you get a good chip. As soon as you take it over 1.25v which intel recommends the that's your warrenty gone in a second that's the risk we take.
4300 solid
4400 more than just a ss.. but not fully stable
my mars is r.i.p worst died by my hands and not cpu/oc
getting blackops now
Last edited by NapalmV5; 09-08-2008 at 01:02 PM.
People with good chips please post the batchcodes and help your fellow clockers try to get some good stuff as well
- Asus P8P67 PRO
- i5 2500K - L103A965
- Intel Postville X25-M 80Gb SSD
- MSI HD6950@6970
- Thermaltake Toughpower 750W.
- EK Supreme HF Full Copper
- Laing DDC3.2 /w Petrastech top
- Feser Xchanger 360mm
L822B363 from newegg
pack date: august 13th
Q6600 3.6Ghz @ 1.276v | DFI LP LT P35 | Ballistix Tracer PC2-8500 600Mhz @ 2.074v | GeForce 260 GTX | Auzen X-Fi Prelude | PCP&C 750 | Arch Linux ~ WinXP
AMD Athlon 64 X2 3800 | DFI LANParty NF4 SLI-DR | 2x512MB G.SKILL PC3200 BH-5 | OCZ PowerStream 520W | Palit GeForce 9600 GT | Gentoo
Long Live DFI.
Bookmarks