Hey TPower gurus, need a little help here. Setting up a TPower i45 and E8600 with 4 sticks of Corsair XMS. 1 set 2x1 5.5.5.15, 1 set 512x2 5.5.5.12. Both kits are 1.8v but will not post bellow 2.05
Anyway, I had the chip at 450x10 with better RAM, but put that back in my main rig, so here's problem. I can get the system 100% stable at 400x10 with the 1x2 GB kit and ram set to 1:1. As soon as I install the 2nd set, I get BSOD and Memtest errors on test #5. I tried increasing the voltage to the ram, NB and FSB but still in the same boat. I went ahead and set the Bios to auto, so right now it's at 333x10 and RAM at DDR2-400. No errors 10 passes Memtest, and seems stable. So I guess the RAM is not the issue, am I right? What tweeking needs to be done to get this board to 400x10 with all 4 sticks at DDR2-400?
Any help is appreciated. TIA.
Bookmarks