Rebuild my Lian Li PC-A71B

[Paxi]

I hope it´s ok to post it here because it´s not a "real" Worklog this time, since i´m almost finished..
Here was my old one: http://www.xtremesystems.org/forums/...d.php?t=165692

Loop now consists:
D-Tek FuZion rev1
EK NB/SB 5
XPSC 4870X2 Acetal
Theromchill 120.3 (2xScythe Kaze Push, 1xPapst 4132L? Pull)
Laing Ultra 12V 18W w/ modded Top

Hardware:
E6750 @ 3,8ghz 1,45V (3,6@1,4V)
4870X2
4GB G.Skill PQ
DFI DK P35
Corsair 1000W

Temps:
CPU: Idle:29C
GPU: Idle:35C
NB: Idle:39C (last component in the loop)

Haven´t made any Benches or something so far, so i can´t say something about the Load Temps^^

And here is cra**y Pic from my Phone Cam:


Will up some Pics of the finished System with Cable Management, Cathode and some little things outstandig after the weekend, this is just a blurry pic to make you guys interested
I like it more than my first build, but tell me what you think about it..

regards

[FrostyPanda]

Like the colors. One thing I would change though is the length of tubing you've got at the bottom. I would route it through the top because it is just going to get heated by the PSU and the front fans. Looks good though

[MomijiTMO]

I don't think it really matters much. Unless the psu was like 1000C, having the tubing near it won't make any significant difference in temps. If it were me, I would have it going from the pump to your first block . Good job.

[Paxi]

Here are the Pics from the finished System:






I´m running the Fans @ Low Speed and getting:
CPU: 54°C under Primeload
NB: 46°C
GPU: 42°C
This seems very good for me with only one Tripple Radiator.. although i´ll add a second Dual Radiator to the Loop to improve the Temps a bit and for my future Nehalem Setup..
Only the MEMIO on one card gets ~80°C under heavy Load, this has already been discussed here http://www.xtremesystems.org/forums/...49#post3418049 .. well don´t think it really harms my card so i can live with it..

@MomijiTMO: Thats a good idea, will think about this when i add a second Rad.. but for now i´m a bit to lazy to make this^^

regards