Could somebody identify for me what this? My english is not good enough to give a detailed description of the stuff. Hope the pics will do
Fuzion-V2 - Tygon R3603 - DCC3.2 - PA120.3 - distilled water with 2 drops P-nuke and some feser dye.
Few weeks ago I installed this wc set-up for someone.
( Flushed the rad with hot tapwater a few times and checked the water in a glas till it was clean. After that I used a liter distilled water (+PT Nuke) to clean the rad from the tapwater. I'v done this like this with all my own builds and it never gave me problems of any kind.)
After about 3 days the water became cloudy. In the res is also some white stuff.
At first I thought it was some residu left somehow from the rad. So I went back to him to clean everything (2.5 h train ride )
Cleaned the rad again same as above, but now with 3 times 45 min vinegar time after the hot tapwaterflush (250ml vinegar and 750ml distilled water) each time after the vinegar I cleaned the rad with distilled water. (The vinegar cleaned a lot of bleu dye)
So no color in the water the second time.
But after about 3 days the same happened and the stuff came back.
I am not very familiar with "waterproblems" and rarely have read topics about the subject. I even do not know how algea looks like.
So before I will go on a 2.5 h traintrip to the south of the Netherlands I would like to know what I'm up against and how to fight it
btw the xspc res top was very hard to clean. I could not completely remove the white stuff in it. But at the time I was thinking it was residu from the rad. If it is algea...
ok, thanks in advance!
Bookmarks