Page 1 of 2 12 LastLast
Results 1 to 25 of 45

Thread: SF3D OC party (E8600 = pifast WR + more)

  1. #1
    Nice Hardware!!! SF3D's Avatar
    Join Date
    Jan 2006
    Location
    Finland/Tampere
    Posts
    1,852

    SF3D OC party (E8600 = pifast WR + more)

    Hi!

    Some of my russian friends (NeoForce, Dedal and Donny) was having a holiday in Finland. We were preparing ourselves in my summerplace on friday. We eat and drink.. a lot (yes, that is 1L of vodka on the table for starters)
    My friend Jukka is not in the picture, but he was having fun with us.

    Here is the crew picture:




    Donor and Dedal is trying to break the ladder:




    Next day we were having a really good feeling and it was time to do some overclocking. Intel Russia was very kind when they delivered us a nice E8600 to play with.

    Here is the beauty (E8600 ES) (Thanks to Intel Russia)



    Here is the setup for saturday benching: (Maximus II Formula, DDR2) NeoForce got the honor to bench this great setup



    Here is the best results from saturday bench session:

    Superpi 1M: 7.516 / 6.158GHz ( I don't have right screenshot, motherboard is missing):



    Superpi 2M: 19.266 / 6GHz (Random run..)



    Superpi 4M: 46.219 / 6GHz (just random run...)



    Pifast / 6077 MHz. (This was WR at that time of the weekend ) Congratulations to NeoForce



    Aquamark with GTX 280 / 6053 MHz:



    Max validation 6.2GHz:
    http://valid.x86-secret.com/show_oc.php?id=388204

    That was the day 1 with E8600. After great results it was time to celebrate those scores and we were in the city until the sun was rising again. After a short sleep we started to bench next setup. It was time to use my new revision of ASUS P5Q3 Deluxe, which was doing a lot better with memory than the previous rev.

    In the morning we were sightseeing Tampere:








    Then was the benching time

    Here is me preparing the board (remember to check the sitting posture and wall behind :



    After few hours of benching (P5Q3 Deluxe):



    Here is the results from sunday:

    Superpi 1M: 7.532 / 6172 MHz (My OS is not very well optimized )



    Aquamark3 344.629 / 6045MHz / single GTX 280:



    Then the best part of this sunday Pifast WR.. at least it was when I was benching





    [This board is really awful in superpi 32M So I didn't bench it at all. 3DMark01 is not fast with enough with single GTX 280, so there was no idea benching it


    Thanks my friends It was really nice weekend and scores were even nicer! We will meet again in HIT 2008 in noverber in St. Peterburg

    Special thanks to:
    Intel Russia
    ASUS Nordic (Kinc)
    Tamrex for providing 40L of LN2

    Thanks to you all for checking this thread! Bye!
    You are as good as your samples are!

  2. #2
    Xtreme Enthusiast Brandybuck's Avatar
    Join Date
    Sep 2004
    Location
    Istanbul , Türkiye
    Posts
    522
    very well result congrats did you try 3dmark over 6ghz

  3. #3
    Xtreme Member
    Join Date
    Nov 2005
    Posts
    115
    Nice fsb on both boards. Congrates on the record and nice scores all around. What a holiday, booze and ocing.
    Core i7 930 @ 3.8 1.24v
    Asus P6X58D Premium
    6 gb G.Skill Pi 1600
    Diamond 4870
    Corsair 750HX
    Intel X25-V SSD
    2 x WD 640gb black
    Lian li PC-70
    Asus MS238H LED Monitor
    H2O: Thermochill 120.3, MCP 655 pump, EK Supreme HF (nickel/acetal), San Ace fans

  4. #4
    Xtreme Legend dinos22's Avatar
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,465
    wow you guys had a nice team there
    i love the place you live at
    so tranquil

    good results but the board seems to be letting you down
    try biostar as you can use PL9 up to 650 at least
    it will be very fast
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  5. #5
    Nice Hardware!!! SF3D's Avatar
    Join Date
    Jan 2006
    Location
    Finland/Tampere
    Posts
    1,852
    Quote Originally Posted by Brandybuck View Post
    very well result congrats did you try 3dmark over 6ghz
    Thank you! My P45 board is not good with 3Dmarks at the moment. I have to test my motherboard much more before next bench session.

    Quote Originally Posted by fasttruck860 View Post
    Nice fsb on both boards. Congrates on the record and nice scores all around. What a holiday, booze and ocing.
    Thanks! it's not a holiday if there isn't booze and oc

    Quote Originally Posted by dinos22 View Post
    wow you guys had a nice team there
    i love the place you live at
    so tranquil

    good results but the board seems to be letting you down
    try biostar as you can use PL9 up to 650 at least
    it will be very fast

    I got my board just before these guys arrived. I didn't got any time to check subsettings or GTLref. PL 9 would have been nice.

    The summer place is ment to be a place where we can chill out and forget every bad thing in our lives
    You are as good as your samples are!

  6. #6
    Banned M.Beier's Avatar
    Join Date
    Feb 2005
    Location
    Copenhagen, Denmark
    Posts
    4,702
    Nice run
    Though, as always, I insist, its not WR before release of HW, but hey; thats soon

    EDIT:
    your debug, where did you get it? I cant find any basic ones in DK, sadly!

  7. #7
    Champion ZoLKoRn's Avatar
    Join Date
    May 2006
    Location
    Bangkok, Thailand
    Posts
    1,376
    Very nice well look like very funny time
    Sorry For My English
    OverclockZone Team
    THAILAND

  8. #8
    Admin Gautam's Avatar
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,275
    The rules of extreme benching are being rewritten as we speak. Congrats guys on showing us what real benching is going to entail in the days to come, so much for wimpy 5.8's and wussy screenshots at 6g's. That's the standard now. Can't wait for these chips to retail.

  9. #9
    Nice Hardware!!! SF3D's Avatar
    Join Date
    Jan 2006
    Location
    Finland/Tampere
    Posts
    1,852
    Quote Originally Posted by M.Beier View Post
    Nice run
    Though, as always, I insist, its not WR before release of HW, but hey; thats soon

    EDIT:
    your debug, where did you get it? I cant find any basic ones in DK, sadly!
    It's in the HWbot now. I got the second place in oc league

    That debug card is from Russia. I can't find any from here either.

    Quote Originally Posted by ZoLKoRn View Post
    Very nice well look like very funny time
    Yes, it was a funny weekend

    Quote Originally Posted by Gautam View Post
    The rules of extreme benching are being rewritten as we speak. Congrats guys on showing us what real benching is going to entail in the days to come, so much for wimpy 5.8's and wussy screenshots at 6g's. That's the standard now. Can't wait for these chips to retail.
    Yes. These chips are insane. 6G is nothing . If our motherboards would not have limited the overclocking, scores would have been better. I think we will soon see some sick Superpi / pifast scores
    You are as good as your samples are!

  10. #10
    Xtreme Owner FUGGER's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    11,855
    Nice chip and board, thanks for sharing the pics.

    Grats on 6Ghz
    ASUS Maximus VII Extreme
    2X ASUS GTX Titan
    Intel 4790K Overclocked
    Swiftech WC
    16GB Corsair Dominator Platinum 2666C10
    4X Corsair Neutron SSD
    Corsair 1200i
    NZXT Phantom 800


    Intel 5960X USA
    Asus Rampage V Extreme
    Asus GTX 780
    16GB Corsair Vengeance 2666C15
    1TB Intel SSD RAID 0
    Corsair AX1200
    Dimas Benchtable

  11. #11
    Xtreme Addict George_o/c's Avatar
    Join Date
    Aug 2007
    Location
    Greece
    Posts
    1,702
    Great job SF3D ! Congarts on the WR too

    Quote Originally Posted by SF3D
    The summer place is ment to be a place where we can chill out and forget every bad thing in our lives
    Yeah, but you got to admit ... Benching with friends while having some beers, a large pizza (I am chubby ) and also discussing with them, is much more fun than benching alone !

    For example, benching SPi 32M takes you like 13- minutes (65nm dual cores on watercooling) ... what am I supposed to do in that period of time ?
    Last edited by George_o/c; 07-13-2008 at 10:53 PM.

  12. #12
    Registered User ataruz's Avatar
    Join Date
    Nov 2005
    Posts
    79
    Congrats. Nice Setup and Nice pictures
    Hwa Oc Team TÜRKİYE

  13. #13
    Xtreme Member Zannema's Avatar
    Join Date
    Mar 2007
    Location
    Italy
    Posts
    478
    Congratz for WR my friend
    Extreme Overclocker


  14. #14
    Registered User Traxman's Avatar
    Join Date
    Jun 2007
    Posts
    27
    Really nice benchs !

    I've a question, which bios did you use in the Maximus 2 Formula ?
    Because with mine, it was difficult to reach high frequency, but FSB is allright (670 ready). Coeff 8x is okay, but higher no.

  15. #15
    Xtreme Member MARCO74's Avatar
    Join Date
    Aug 2007
    Location
    ROMA Italy
    Posts
    135
    Nice run end great chip.

  16. #16
    One-Eyed Killing Machine BenchZowner's Avatar
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,153
    Very nice guys.
    Congrats on the scores.
    Looks like you had some real fun there as well

    And SF3D, nice place man
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero

  17. #17
    Xtreme Enthusiast Nordling's Avatar
    Join Date
    May 2005
    Location
    St.-Petersburg, Russia
    Posts
    517
    As it is a pity that at me is not present while possibility to go in Finland


  18. #18
    Xtreme Enthusiast hey's Avatar
    Join Date
    Oct 2005
    Location
    istanbul/Türkiye
    Posts
    827
    These 8600s rocks!!! but of course have a good job on it! congrats

  19. #19
    Xtreme Enthusiast loopy83's Avatar
    Join Date
    Apr 2007
    Location
    Germany
    Posts
    570
    I want such a 8600
    Nice results.....

    and nice pics of your holidays.....

  20. #20
    Champion Monstru's Avatar
    Join Date
    Jan 2007
    Location
    Romania, lab501.ro
    Posts
    1,698
    You guys seem to have a lot of fun, in beautiful places and with nice o/c toys. Congrats guys
    Weissbier - breakfast of champions



  21. #21
    Xtreme Guru Solarfall's Avatar
    Join Date
    Jun 2006
    Location
    Finland, joensuu
    Posts
    3,530
    SWEET CLOCKS+ numbers.. heheh damn petri !!!! how many motherboard do you have :P:P:P:P
    Evga X58 sli under cascade
    http://www.xtremesystems.org/forums/...d.php?t=219788
    Evga X58 Sli ultimate overclocking/ overview/ discussion thread
    http://www.xtremesystems.org/forums/...d.php?t=221082


    proud owner of E8600 Q822A435

  22. #22
    Xtreme Member xt0m's Avatar
    Join Date
    May 2006
    Location
    Denmark
    Posts
    384
    Nice results, bro - wish I could've stuck around for the meet
    Looks like you finally found someone who didnt chicken out of going to the top of the tower, lol

    Are the bridgy/latter pics from Vähäjärvi?

    See you again some time before Xmas
    Oh blah?

  23. #23
    OCTeamDenmark Founder Nosfer@tu's Avatar
    Join Date
    May 2004
    Location
    Denmark, Copenhagen
    Posts
    2,364
    Amazing results.
    Amazing Team.

    Amazing Weekend

    Love to see teams or just cross country benching
    Everybody is having so much fun
    Former owner of OCTeamDenmark.com
    MSI MOTHERBOAR!!!!!!

    Linkedin


  24. #24
    Nice Hardware!!! SF3D's Avatar
    Join Date
    Jan 2006
    Location
    Finland/Tampere
    Posts
    1,852

    The longest quote monster I have seen...

    Quote Originally Posted by FUGGER View Post
    Nice chip and board, thanks for sharing the pics.

    Grats on 6Ghz
    Thank you! &GHz is quite easy with 10 multiplier.

    Quote Originally Posted by George_o/c View Post
    Great job SF3D ! Congarts on the WR too

    Yeah, but you got to admit ... Benching with friends while having some beers, a large pizza (I am chubby ) and also discussing with them, is much more fun than benching alone !

    For example, benching SPi 32M takes you like 13- minutes (65nm dual cores on watercooling) ... what am I supposed to do in that period of time ?
    True. I have always overclocked alone and it is getting boring nowadays. More people, more fun.

    Quote Originally Posted by ataruz View Post
    Congrats. Nice Setup and Nice pictures
    Thanks you!

    Quote Originally Posted by Zannema View Post
    Congratz for WR my friend
    Thank you! I think it will be beated badly soon

    Quote Originally Posted by Traxman View Post
    Really nice benchs !

    I've a question, which bios did you use in the Maximus 2 Formula ?
    Because with mine, it was difficult to reach high frequency, but FSB is allright (670 ready). Coeff 8x is okay, but higher no.
    Thanks! you can see the bios from screenshots. High fsb and high MHz does not always go together like you know.

    Quote Originally Posted by MARCO74 View Post
    Nice run end great chip.
    Thanks! Chip is great!

    Quote Originally Posted by BenchZowner View Post
    Very nice guys.
    Congrats on the scores.
    Looks like you had some real fun there as well

    And SF3D, nice place man
    Thank you! I like this place too

    Quote Originally Posted by Nordling View Post
    As it is a pity that at me is not present while possibility to go in Finland
    Maybe next time you will come too

    Quote Originally Posted by hey View Post
    These 8600s rocks!!! but of course have a good job on it! congrats
    Yes, it's not just walk in the park, when you are benching over 6.1GHz

    Quote Originally Posted by loopy83 View Post
    I want such a 8600
    Nice results.....

    and nice pics of your holidays.....
    Yes thank you!

    Quote Originally Posted by Monstru View Post
    You guys seem to have a lot of fun, in beautiful places and with nice o/c toys. Congrats guys
    True! Maybe our preparation was the key this time

    Quote Originally Posted by Solarfall View Post
    SWEET CLOCKS+ numbers.. heheh damn petri !!!! how many motherboard do you have :P:P:P:P
    I have enough motherboards Maximus II were NeoForce's own board.

    Quote Originally Posted by xt0m View Post
    Nice results, bro - wish I could've stuck around for the meet
    Looks like you finally found someone who didnt chicken out of going to the top of the tower, lol

    Are the bridgy/latter pics from Vähäjärvi?

    See you again some time before Xmas
    Thanks! The dock where Dedal and Donor are jumping is in my summerplace 30km to the west from Tampere.

    Quote Originally Posted by Nosfer@tu View Post
    Amazing results.
    Amazing Team.

    Amazing Weekend

    Love to see teams or just cross country benching
    Everybody is having so much fun
    True, True, True. This is nice hobby, cause it is so international
    You are as good as your samples are!

  25. #25
    Xtreme Enthusiast gandalfone's Avatar
    Join Date
    May 2005
    Location
    Italy
    Posts
    502
    Nice bench

    Congratz

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •