I am not sure if this is the right place to post this, if it is not then please remove this thread.
I have read a couple of threads about users that are having a hard time finding the right settings for memory’s and CPU etc on the Black Ops, so I have decided to share some of the settings that have worked for me and hopefully that can help someone else to get started. Also, do you have any other suggestions than mine for setting up the Black ops, or mayby settings for other hardware than used here, then please post.
This Monday I received my new pair of Cellshock 1866 Blue DDR3 memory’s that I have bought for a comparison that I am doing, when they arrived I started pretty much right away to test them, so this week I have spended many hours in front of the computer trying to learn how these stick and motherboard works together. That means that I have also tried many different setting, timings etc on the Black Ops. And it can be a bit tricky to set up at first, but when you have found the right settings Black Ops rocks. Also, I must say that the memory’s I have used also rock quite a bit.
First I want to write what many other have written, there are no universal settings to get 550 Mhz FSB with dual cores or 450Mhz FSB with quad, or get the memory’s to run at 1800Mhz. Every user has to do their share of tweaking to get the best out of their hardware. Also, if we use the exact same hardware it quite possible that we need different settings to get it to work, and the results may also vary. So Instead of writing down the best possible settings that I have been able to use, I will share settings that are more relaxed and then you can use them as a reference to get started.
This is the system I have used for this:
CPU Quad: ............Intel QX9650 Extreme
CPU Dual: .............Intel E8400
Memory kit 1: .......2GB CellShock DDR3 Micron PC3-15000 D9JNL
Memory kit 2: .......Super Talent ProjectX 1800 D9GTR
Motherboard:....... Foxconn Black Ops // BIOS G27 - G28
SETTINGS:
EDIT: I want to point out that the settings that i suggest isnt going to get you straight to 550Mhz FSB or 1000Mhz ram speeds, this is just settings i have found worked good on the hardware i used. The settings i suggest hopefully will get you started, and mayby can help users that just have bought this board and need some reference. Also, there are plenty of room left for tweaking.
I havent tested the memory timings finished yet, there are some work left to do, when i have tried some more i will update settings. Also, on the D9GTR memorys i havent done the serious testing that have been done on my D9JNL. But i will hopefully do that in the begining of next week, i will update when that is finished.
Here are some results with my Cellshock memorys on the Black Ops, to achive this i have started with the settings above and tweaked. This is with approx 1.955.
¨
Bookmarks