Machine ID is 3 (the config.fcg was successfully changed and I am using core 1.07)
Machine ID is 3 (the config.fcg was successfully changed and I am using core 1.07)
You must [not] advance.
Current Rig: i7 4790k @ stock (**** TIM!) , Zotac GTX 1080 WC'd 2214mhz core / 5528mhz Mem, Asus z-97 Deluxe
Heatware
Oh I will, no worries! I'm still doing SMP!
Maybe I should have stayed a meathead! Lift weights is usually less complicated (other than periodization... don't get me started)
Btw, 4 monitors rocks. 40" samsung lcd, 24", 21" (mounted horizontally to read text w/o scrolling) and 17". EPIC, I know you'd like it.
You must [not] advance.
Current Rig: i7 4790k @ stock (**** TIM!) , Zotac GTX 1080 WC'd 2214mhz core / 5528mhz Mem, Asus z-97 Deluxe
Heatware
Pardon my crappy camera phone!
All 4: TV + 3 monitors (yes, its a 1920x1080 monitor too, not just a TV!)
3 monitors: note the monitor in the middle mounted horizontally
40" LNT40a650 (Great for movies, FPSs and anime)
Now if I could just fold on two cards..... *taps fingers on desk*
You must [not] advance.
Current Rig: i7 4790k @ stock (**** TIM!) , Zotac GTX 1080 WC'd 2214mhz core / 5528mhz Mem, Asus z-97 Deluxe
Heatware
4 mons=a lot of pr0n... Did I post that out loud?
Holy crap! Synthetic was right! He isn't sane!
i3-8100 | GTX 970
Ryzen 5 1600 | RX 580
Assume nothing; Question everything
lawl, strangely, no. :banana::banana::banana::banana: isn't "hardcore" enough... maybe I should stop where I am, haha....
Riptide, any ideas? I'm lost....
You must [not] advance.
Current Rig: i7 4790k @ stock (**** TIM!) , Zotac GTX 1080 WC'd 2214mhz core / 5528mhz Mem, Asus z-97 Deluxe
Heatware
You must [not] advance.
Current Rig: i7 4790k @ stock (**** TIM!) , Zotac GTX 1080 WC'd 2214mhz core / 5528mhz Mem, Asus z-97 Deluxe
Heatware
I think riptide took a nap (can't blame him, I would!). Anyone else got this working?
Riptide, I have not lost faith, I'm just impatient and posing points by the second!
You must [not] advance.
Current Rig: i7 4790k @ stock (**** TIM!) , Zotac GTX 1080 WC'd 2214mhz core / 5528mhz Mem, Asus z-97 Deluxe
Heatware
I uninstalled the original client and reinstalled and now it won't work either. Strange again..
I am trying this:
http://www.xcpus.com/forums/folding-...e-nv-gpus.html
Now I can't find 1.07 core. Anyone know of a working link?
Last edited by [XC] Synthetickiller; 07-22-2008 at 08:39 PM.
You must [not] advance.
Current Rig: i7 4790k @ stock (**** TIM!) , Zotac GTX 1080 WC'd 2214mhz core / 5528mhz Mem, Asus z-97 Deluxe
Heatware
What about stock clocks? Are you on stock?
Sorry riptide, called the g/f
The GPU client automatically goes to the 8800gt and its stock. I am unclear as to how to fix this mess. Just my luck, ha! I can lower the 8800gts, but I don't see why as its not picking that GPU.
You must [not] advance.
Current Rig: i7 4790k @ stock (**** TIM!) , Zotac GTX 1080 WC'd 2214mhz core / 5528mhz Mem, Asus z-97 Deluxe
Heatware
Right. Well I reckon you might have to go to Project forums for that. If I had 2 GPU's I'd help further...
NP. I might try to disable the 8800gt for a bit and just install one instance for now.
Thanks for all the help!
We'll all have to discuss this later on. It seems to work in xp, vista is problematic w/ multi-client set ups.
You must [not] advance.
Current Rig: i7 4790k @ stock (**** TIM!) , Zotac GTX 1080 WC'd 2214mhz core / 5528mhz Mem, Asus z-97 Deluxe
Heatware
i got it working normally, but it selected the 8800gt. Hmmm... now how to get a second one....?
You must [not] advance.
Current Rig: i7 4790k @ stock (**** TIM!) , Zotac GTX 1080 WC'd 2214mhz core / 5528mhz Mem, Asus z-97 Deluxe
Heatware
I am ALMOST there. I get a cudart.dll error w/ the 2nd instance. Anyone run into that?
You must [not] advance.
Current Rig: i7 4790k @ stock (**** TIM!) , Zotac GTX 1080 WC'd 2214mhz core / 5528mhz Mem, Asus z-97 Deluxe
Heatware
Open the folder of your first instance and copy th cudart.dll into the 2nd one.
3D Mark 03 - 70606http://service.futuremark.com/compare?2k3=5805528
3D Mark 05 - 23011http://service.futuremark.com/compare?3dm05=4184498
3D Mark 06 - 18520http://service.futuremark.com/compare?3dm06=6243926
3D Mark Vantage - P11062http://service.futuremark.com/compare?3dmv=26530
3D Mark Vantage - X4239http://service.futuremark.com/compare?3dmv=28396
You must [not] advance.
Current Rig: i7 4790k @ stock (**** TIM!) , Zotac GTX 1080 WC'd 2214mhz core / 5528mhz Mem, Asus z-97 Deluxe
Heatware
Do u have two instances of GPU running on a vista pc? Care to share where you got the walkthrough from. I am lost. i can so close and this DLL problem is odd, although i have read about it before.
F@H needs one client that'll run multiple GPUs! Pick which gpu, hit enter. Pick another, hit enter! Lol
Edit:
I tried this walkthough, but I had some trouble.
http://forums.teamphoenixrising.net/...ad.php?t=50754
I am getting the problems like other people w/ the dll error.
Last edited by [XC] Synthetickiller; 07-23-2008 at 08:12 AM.
You must [not] advance.
Current Rig: i7 4790k @ stock (**** TIM!) , Zotac GTX 1080 WC'd 2214mhz core / 5528mhz Mem, Asus z-97 Deluxe
Heatware
I am hosting it.
http://www.makt3k.com/Public/FahCore_11.zip
EPIC thanks!
You must [not] advance.
Current Rig: i7 4790k @ stock (**** TIM!) , Zotac GTX 1080 WC'd 2214mhz core / 5528mhz Mem, Asus z-97 Deluxe
Heatware
Bookmarks