OC e7200 + Biostar GF7050V-M7 SE

[synxll]

Hi everybody, i've buy the GF7050V-M7 SE not the GF7050V-M7.
I dont know the differences between then, here on Argentine only sold the GF7050V-M7 SE at u$s 55.

I also buy an e7200, and the board is really amazing, here some stability test, i've been doing today:

Hardware used:
KTC 19´ 4:3
Powercooler 550w modular
Biostar GF7050V-M7 SE bios 080015,not test other 2 bios that was on biostar page
e7200 step Q813A523 (Stock a 266 x 9.5 = 2527 Mhz) VID 1.1250
Cooling AS Ceramique + Thermaltake Big Typhoon VX
Cooler of 6x6 over the northbridge
2 x 1gb en Single Channel OCZ Platinum rev2 800 Mhz
VGA Sapphire HD4850 @ stock
Sound Blaster Audigy SE
Windows UE 7


The board:
Only lets go up the vCore, north and vtt in values of porcentage with a max of 6%.
vDimm lets go up after 2.25v
How you can see, limited options for OC

The max vcore on load that gives is 1.232v



Pics

Yeap, the fan its exausting, i put again puting air the down, in the picture its exausting.


Here 6 hours dual Orthos stability at 3.6ghz (379 fsb)





Here 1 hour dual Orthos at 3.7ghz (390 fsb) with differents temperature measurement softs:



Here 1 hour dual Orthos at 3.8ghz (400 fsb)



Tomorrow more and longer test for 3.8ghz. And hope 3.9ghz

Bye

[LagunaX]

Looks like you might get to 4ghz =)

[synxll]

Looks like you might get to 4ghz =)

Hi, i don't know if will do the 4ghz, the board looks like to found their top.

The board boots ats 3.9 or 4 but dont load windows.

I've to try with clockgen and the're another 2 bios for the board on the biostar page, i've to test that bios.

Bye

[synxll]

Here stabily Orthos test for 10 hours @ 3.8ghz



Here temps with differents softs:



Here Orthos on Idle:



Tomorrow i'll see if i can rise some mhz with clockgen

[Lestat]

look for your PLL chip and see if SetFSB has it so you can overclock in windows.

start doing a hardware vcore mod to increase your vcore

and why on god's green earth are you running 3 Orthos?!?

all you need is one. One of them is enough to stress the cpu. 1 instance will make the cpu run 100% so running 3 doesnt do anything but possibly make the other tests bad.

[synxll]

look for your PLL chip and see if SetFSB has it so you can overclock in windows.

start doing a hardware vcore mod to increase your vcore

and why on god's green earth are you running 3 Orthos?!?

all you need is one. One of them is enough to stress the cpu. 1 instance will make the cpu run 100% so running 3 doesnt do anything but possibly make the other tests bad.

I'll search for the PLL later.

Respect to hardware vcore mod, i've been looking, and find nothing for my board

Did are any vcore mod for the cpu ?
I'see a BSEL mod from 1066 to 1333, but dont see any vcore mod for the e7200

Respect to orthos, i like to do the 3 test, so to spend less time i pass the 3 instances at the same time

Bye and thanks

[Knight]

Is it me or does your fan look like it is inverted? Flip it and you might get better temperatures.

Try OCCT for a stability tester.

[synxll]

Is it me or does your fan look like it is inverted? Flip it and you might get better temperatures.

Try OCCT for a stability tester.

Yeap, on the pics its inverted, i've been cleaning the HSF, but i put on the right way when i do the tests

Respect to OCCT, I try, but i like Orthos . Thanks anyway


I search for PLL on clockgen and SETfsb and found nothing with my PLL
Tomorrow i'll search again

Bye

[synxll]

Some actualizations, i do a vDroop mod, before then i'm stuck at 3.8ghz, now i've reached 3872mhz, also Orthos stables. A 2% more of OC over the 3.8ghz. Now i'm at 53.22% with a 55u$s dollars boad


Before the vDroop mod, i've this:
Idle 1.248v
Full Load 1.216v

0.032v between idle and full


After the vDroop mod
Idle 1.264v
Load 1.248v to 1.264v

Or 0.016v of vDroop, or 0,79% of riple


In conclusion, between the max and min values of vCore on load, i win between 0.032v y 0.048v more on full load.



Here an OCCT graphic showing the Riple




Well, here 9h and 30min Orthos Stability:



Idle:




Still left to try other two bios, search if they're any vcore mod, for the board. Because one friend do 426 of fsb with an e1200, so i still have more fsb to go up, my goal it's 421 of fsb, 4.0ghz Stable, actually i'm at 407.5 of FSB, 3872mhz.
I think that with only 0.1v more, y can do 4ghz stables. Im really closer to 3.9ghz