Finally in the 5 Ghz club

[makaka]

Hi there ;
First i want to thanks all members here for their help .
Well it is pretty hard to post in this forum section due to the amazing overclocks . Now i got the vapochill ls (thanks to Etoh ) and i can show some decent result . Since the vapochill ls was fully broken while it was traveling i have serious with but it still cold enough for 5 Ghz .
System used :
P5B-e plus (560 fsb stable with stock cooling) : air , full mod . chipset @ 1.55v
Ocz 9200 2x1 GB : air :2.1v
E8500 . vapochill 1.5v
8800GT (water) and some other crap
420w psu


Here the result . I am waiting for new mount since the vapochill did not come with the 775 kit and the evaporator has a poor contact with the cpu (delta over 50 c)
Note the unit include the R22 , tomorrow i will swap it with R404 . when the new mount will arrive i will update this result for sure
Note this was far from the max , @ this frequency i can even game (1.30h tested ) . but my temp are pretty poor -25c idle and 10c load
Sorry for damn poor english

[Toferman]

Nice one, good to see the C0s are getting up there.

[[XC] gomeler]

A very nice start, now you just need that new mount and 5200MHz should be yours

[TheKarmakazi]

nice work man and welcome to the club!

[Hyperhorn]

Nice work buddy. Efficiency is affected by daily use-OS, 9.4xx is possible without too much effort. To join 6 Ghz club on singlestage try a Cedar Mill, you've got a proper P5B-E Plus.

[makaka]

Nice work buddy. Efficiency is affected by daily use-OS, 9.4xx is possible without too much effort. To join 6 Ghz club on singlestage try a Cedar Mill, you've got a proper P5B-E Plus.

I will try , Cedar Mill are pretty cheap now

nice work man and welcome to the club!

Thanks . i know i am a bit late

A very nice start, now you just need that new mount and 5200MHz should be yours

Sure , new mount was shipped today

[OC4/3]

Congrats.I think might join 5ghz club and 8's pi soon under water when i get memory sort out

[makaka]

Congrats.I think might join 5ghz club and 8's pi soon under water when i get memory sort out

5 GHz under water . This cpu hold 4.7 under water but it require at least 1.5 v to be stable . i think that u may require 1.65v for screen shot 5 ghz and 1.75 v for 2 hours stable work before getting this chip burned

[OC4/3]

5 GHz under water . This cpu hold 4.7 under water but it require at least 1.5 v to be stable . i think that u may require 1.65v for screen shot 5 ghz and 1.75 v for 2 hours stable work before getting this chip burned

I don't think i will burn the chipWill make some cold distill water to mix in for lower tempAnyway,i will try to squeez whatever i have from this chip but most likely i will go for E0 stepping chip

[ZenEffect]

congrats! come play!
http://i48.photobucket.com/albums/f2.../superpi-3.jpg

[makaka]

I don't think i will burn the chipWill make some cold distill water to mix in for lower tempAnyway,i will try to squeez whatever i have from this chip but most likely i will go for E0 stepping chip

Not a bad idea . How E0 compare to C0 in therm of clock ?

congrats! come play!
http://i48.photobucket.com/albums/f2.../superpi-3.jpg

Damn nice .
But i don't think that my p5b could hold that FSB . what is your chipset cooling is it stable at 50 fsb ??(i am just planing to swap my mobo , i got a few day ago the maximums asus X38 witch was crapping out @ 510-52 fsb)

[Amped]

Hi, I saw on the screenshot that your aux is 119c degrees. I have a asus p5k-e wifi/ap and speedfan says the exact same thing with me.
Is it speedfan that is wrong or?

[makaka]

sure speed fan reporting a sensor temp .

[ymer]

I wish I was part of the club


Congrats

[makaka]

I wish I was part of the club


Congrats

Thanks .

[Solarfall]

welcome to the 5 ghz club.. next step for you is to get some ln2 and smash the 6ghz barrier

[makaka]

hope to get some ln2 soon

[strange|ife]

congrats, very nice clocks for a 24/7 system.

one of these days i will plunk money for a vapochilly. Need to stop buying non computer stuff first though

[makaka]

congrats, very nice clocks for a 24/7 system.

one of these days i will plunk money for a vapochilly. Need to stop buying non computer stuff first though

Do not waste your money on vapochill , go with custom unit

[ZenEffect]

Do not waste your money on vapochill , go with custom unit

qft. i have a vapochill... but i got it for dirt cheap.

makes me wish i had gone custom... but now im thinking about having it modded.

to answer a old question... i did it on p5q-e stock cooling... just a 120mm yate loon pointed in its general direction. the maximus i just got back from rma can do 550fsb

3dmark01 is my game of choice atm.

[makaka]

Yeah i hate the compressor noise in the lS version

[OC4/3]

Not a bad idea . How E0 compare to C0 in therm of clock ?

Early result look good from colaler.com

[makaka]

Early result look good from colaler.com

I don't think so , those ES models usually clock better . moreover good steeping now C0 are also capable to show similar or even better result . let us us hope for better .