Some piccies with the card installed... will post some benches this weekend and temp readouts
Some piccies with the card installed... will post some benches this weekend and temp readouts
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
No sinks on the memory?
QX9650 @ 4450 mhz
Asus Striker II Extreme 790i
4 GB Corsair Dominator 1800 @ 1870 8-8-8-20 1T 1.8v
3 x Asus GTX280 TRI-SLI 810/1647/1296
Asus Xonar DX
Thermaltake Toughpower 1500 W
Dell 30" 3007WFP
Logitech G7, G15, G25
Watercooling Hailea 1500 chiller, EK, Swiftech, D-Tek
Dual Prometeia site
Nope beefy 25cm fan in the sidepanel... even at 1250mhz they ram chips are cool to touch... but will order the backplate just for my piece of mind...
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
Did a 3dmark 2006 run at 740/1480/1250 and max temp I got was 46°C... CPU was an E8400@4ghz 1.22volts... cooled by a Thermochill PA120.3 rad with Laing pump and EK reservoir...3/8 tubing :
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
Good looking block!
Keep us posted...
Asus Maximus SE X38 / Lapped Q6600 G0 @ 3.8GHz (L726B397 stock VID=1.224) / 7 Ultimate x64 /EVGA GTX 295 C=650 S=1512 M=1188 (Graphics)/ EVGA GTX 280 C=756 S=1512 M=1296 (PhysX)/ G.SKILL 8GB (4 x 2GB) SDRAM DDR2 1000 (PC2 8000) / Gateway FPD2485W (1920 x 1200 res) / Toughpower 1,000-Watt modular PSU / SilverStone TJ-09 BW / (2) 150 GB Raptor's RAID-0 / (1) Western Digital Caviar 750 GB / LG GGC-H20L (CD, DVD, HD-DVD, and BlueRay Drive) / WaterKegIII Xtreme / D-TEK FuZion CPU, EVGA Hydro Copper 16 GPU, and EK NB S-MAX Acetal Waterblocks / Enzotech Forged Copper CNB-S1L (South Bridge heat sink)
Let us know how the ram chips are doing as I'm thinking of WC'ing my GTX 280 when I order it but I'm half hoping the 23mm side fan will be enough to keep them cool (TT Armor+)
Sub-Silentio: Stable 3.83Ghz:
---------------------------------------------------------------------------------------------------------------
| Intel Core 2 Quad Q9550 2.83GHz ....... | Lian Li V2010 ........... | DDC3.2 w/ XSPC Top ... | Bios .. 1104 |
| EVGA GeForce GTX 280 1024MB ........... | Zalman ZM1000-HP ........ | TFC 480 .............. | Vcpu . 1.36V |
| Asus Striker II Extreme nForce 790i ... | Razer Lachesis .......... | Zalman ZM-F3 ......... | V nb . 1.50V |
| Corsair XMS3 DHX DDR-1600 7-7-7-20 .... | Razer Lycosa ............ | D-Tek Fuzion V2 ...... | V sb . 1.50V |
| WD 300GB Velociraptor ................. | Hyundai W240D-PVA 24" ... | EK-FC280 ............. | Vmem . 1.90V |
---------------------------------------------------------------------------------------------------------------
All suggestions welcome - Overclocking tips here: http://www.xtremesystems.org/Forums/...d.php?t=208522
I checked them and they are barely warm at 1250Mhz with the 25Cm fan... without they are hot... but I'm going for the Alu backplate once Eddie puts it up on his webbie...
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
I finally tested my stock gtx last night after getting it in last thursday afternoon. I can run about 10mhz shy on the core (linked) as what you show, but can't seem to push my ram much faster than stock. I need to do some more playing around, but it is almost looking like a wash between water and air on this card.
Asus Maximus Formula (Rampage Conversion Bios 0403)
Q6600 G0 stepping@4.05 Ghz
8GB G. Skill 1066 @ 1081 Mhz
EVGA 280 GTX
Auzentech Prelude
2X 74 GB WD Raptors in Raid 0 Windows 7 Ultimate 64
2X 1 TB WD Caviar Blacks in Raid 0 Vista Ultimate x64
Thermaltake Toughpower 1200W
DTek Fuzion V2 in a custom CPU only water loop
Coolermaster Stacker 830
Hanns-G 28" widescreen
Klipsh Pro-Media 2.1
G15 Keyboard and G9 Laser Mouse
some more testing today : 760GPU / 1520 Shaders and 1296mhz on the ram... 3DMARK2006 stable no artifacts whatsoever
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
Alu backplate arrivd and will install it today and take some piccies lads...
Backplate has slightly longer screws then the ones from the waterblock...installation is a no brainer... I opted for the Alu backplate as a waterblock on top would have left me very narrow space with the top PCI slot on my P5Q dlx mobo... secondly I have ran the rams barenaked at 1250mhz for a few weeks now, just a 25cm fan in the sidepanel blew some fresh air over them... no hickups there... with the backplate the card is straight again and doesn't bend at all due to the weight of the bottom copper block...
Top ace job again Eddie !!
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
Can the AL backplate come in a chrome version for consistency? And on either black or chrome version, could those screws come in black? Probably I could work those out on my own, but they'd be a nice detail improvement.
Bookmarks