CSX DDR3 arrived: Diablo 2000MHz & CEC 1333MHz kits first look

[over@locker886]

Fantastic result man, can you do 32M 2000 7-6-6 too?

Rampage Extreme and this mem seems 2B the perfect combo!

Yes, I can with more vnb, and vref

NB~1,594v-1,601v
NBvref : +12,5mW
DDR3 A vref : +12,5mW
DDR3 B vref: +12,5mW
RAM~2,183v-2,196v

2000 7-6-6-18 1T SPi 32M done

[M3kk]

doesn't mean they are bad m3kk

I know, but Bala told me the GTS version are better :P.

[Oliver]

the gts kit is not bad neither, but you really have a sweet board to let them shine

[NapalmV5]

available anywhere in the usa?

[Oliver]

not yet, but i know there is being worked on that case

[slim142]

OMG over@locker886 show us everest benchmarks!!!

When are this coming to US!!!!!!!!!!!!!!!!!!!!!!

[nut311]

@Kasparz : are you shipping in asia? possible s'pore?

coz i'm live in indonesia

[Mix]

In Portugal where i can get 2x2gb diablo 2000mhz???

[Zeus]

Mine got in this afternoon-- GTR.

Running 900 7-6-5-18 atm, 32M stable with 2.05V, haven't tried higher but will tonight.

[tomati]

Now I can bench my D9GTR kit @ 2000 7-6-6-18-1T with 2.2v till SPI 2M at 4M I got an error in a bound

Maybe some tweaking could help but I don't have the vref option in my premium bios

[Oliver]

what nb voltages are you using tomati?

[tomati]

what nb voltages are you using tomati?

I give up at 1.67v, I have a 120 mm fan over it but don't like so much voltage on NB .

I even tried to relaxing the PL till to 10 but gain nothing ( error or freeze)

I'm able to run stable at 4000ghz ( 7 * 571) with ram at 1828 cas 7-6-6-18-1T with 2.1v and only 1.49v on NB and 1.2v on VFsb.

I didn't touch the skew as I'm not familiar with so I let them at auto.

[Oliver]

Skews will likely help and try higher nb, your playing x48

Lets us know how it goes when pushing further

[BulldogPO]

Wich is better GTR or GTS? I have very good experiences with both of them.

[tomati]

Skews will likely help and try higher nb, your playing x48

Lets us know how it goes when pushing further

Some improvement but I think I have an heat issue, I was able to pass the 4M with 1.69v on NB but 8M get a freeze, I just push my fan to it's max 1350 rpm instead of 800 rpm ( yate loon 120mm on NB and an other one on the Ram)

1.75v was the max I have tried but my heatpipe was really hot and the 2M allready frozen so I slow it down to 1.71v and still failed in 4M.

Never been able to run the 8M, got freeze before end, I need to try with a powered fan on NB .

[Zeus]

Wich is better GTR or GTS? I have very good experiences with both of them.

GTS is supposed to be better.

My kit is GTR but runs nicely 900 7-6-5-18 with 2.05V, will try lower voltage later.

The board seems to be acting up on me with high (550+) FSB and cas 7, i have to investigate what's wrong.

[Oliver]

tomati, glad you did improve

but wise words is pretesting pretesting pretesting

Go keep pushing it

[tomati]

tomati, glad you did improve

but wise words is pretesting pretesting pretesting

Go keep pushing it

I push it

Succeeded on 8M now, this was with a slipstream 1900 rpm (110 cfm rated) on NB at 1.71v . It was well a heat issue .

My P5E3 premium seems to run really hot when I push the NB voltage over 1.6v / 1.65v.

[purecain]

impressive... i'll take 3 sets...

looks like these will become legendary... anyone able to get hold of these in the uk....

[Oliver]

sounds good tomati and the premium is an awesome board for sure, and as told when play 1g+ nb voltage is likely one of the keys

Glad you did it, have you eventually changed paste or maybe going for changing the cooler?

[tomati]

sounds good tomati and the premium is an awesome board for sure, and as told when play 1g+ nb voltage is likely one of the keys

Glad you did it, have you eventually changed paste or maybe going for changing the cooler?

I stopped at 1.83v on NB as I didn't get much improvement (16M failed).

I didn't changed the paste as the heat transfer seems to work fine but maybe should I give it a try.

No cooler replacement as my TRUE wont let me choose other PWM heatsink as I'm running it in Push/Pull.

[slim142]

(Gets a panic attack after seeing these results)

[Oliver]

okay tomati, altought swiftech mc14s will go likely anywhere and work quite awesome

[Zeus]

I think i found some stabilty now at 600 FSB, just needed 400 strap and plenty of volts on the mem, much more than with lower FSB.

The ram is nice though.

[Oliver]

with higher fsb u will get the performance better, still if memory is running same speed, so common you need higher vdimm, because you will more burden on your memory