D9GTS?
Yeaa for sure,
Last edited by Computerville; 09-01-2008 at 08:41 AM.
This is not enought.
Does anybody know if this Diablo will do 1800Mhz 6-6-6-18 2T with 1.90vdimm on a 790i?
If not, whats the best that it would be able to run with 1.90v?
P5E Deluxe x38 @ Rampage Formula (Bios 0802) || E8600 @ 4500mhz @ 1,38v || Ultra 120 Extreme + 2 Yate Loon D12sl + IFX-10 || 2 GB Cellshock PC8500 D9GMH @ 600 (2.3v) 5/5/5/15/2T || 4 x 640gb WD sata II || HD4870 @ 775 - 1000 || CM Stacker STC-01 + 4 Yarte Loon D12SL || Enermax modu82+ 625W || Audigy2 ZS || Logitech Z-5500D || Lacie Electron22BlueIV 22"
P5E Deluxe x38 @ Rampage Formula (Bios 0802) || E8600 @ 4500mhz @ 1,38v || Ultra 120 Extreme + 2 Yate Loon D12sl + IFX-10 || 2 GB Cellshock PC8500 D9GMH @ 600 (2.3v) 5/5/5/15/2T || 4 x 640gb WD sata II || HD4870 @ 775 - 1000 || CM Stacker STC-01 + 4 Yarte Loon D12SL || Enermax modu82+ 625W || Audigy2 ZS || Logitech Z-5500D || Lacie Electron22BlueIV 22"
Sounds interesting about the gts kit Bala, will look forward to see more numbers
Keep pushing it
Yes, my kit is also equiped with GTS chips.
Ordered 2x1GB kit, i hope they will be good with this Rampage Extreme, the results i see here make me drool.
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Well all the ROG Motherboards are known to be overvolting the RAM, so if u put in 1.90 in BIOS, it really is 1.96. Just imagine if you think you are running your RAM at 2.00....
That's what i thought, both the LCD poster and Asus Probe show about the same what i set in bios.
Didn't measure with DMM though,maybe someone can point me to the measure point for Vdimm?
Rabor, did you have active cooling over them?
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Well, I know for sure I will put fans on top of them (OCZ RAM Fan)
Also, I will run them no higher than 1.90 (1.84 in BIOS)
This pair is expensive, and we all hate RMAs
I got new, 2GB Diablo3-2000Mhz kit (Micron D9GTS) from CSX.
Thank you Compustocx!
This new kit very powerful..
2100Mhz 7-6-6-18 1T 2,262v , screenshot.
2000Mhz 7-6-6-18 1T 2,183-2,196v, SPi 8M
Last edited by over@locker886; 09-07-2008 at 08:11 AM.
"We are competing, competing to win. And the main motivation is to compete for victory" - Ayrton Senna
Fantastic result man, can you do 32M 2000 7-6-6 too?
Rampage Extreme and this mem seems 2B the perfect combo!
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Hi,
OMG these D9GTS kit are awesome, they seems to be the only one that can bench at 2000 cas7
Tried first some stability on my D9GTR kit
My best so far: 1828 @ 2.1v 7-6-6-18-1T
Stability at spec settings was fine too
1828 @ 1.9v 8-7-6-15-1T
2000 @ 2.1v 8-7-6-19-1T worked too
But max cas 7 was a bit disappointed, only 1010 for my best stick ( 1003 for the other one) [7-6-6-15-1T with 2.2v] and not benchable
Tested on P5E3 Premium.
Last edited by tomati; 09-07-2008 at 01:28 PM.
P5E Deluxe x38 @ Rampage Formula (Bios 0802) || E8600 @ 4500mhz @ 1,38v || Ultra 120 Extreme + 2 Yate Loon D12sl + IFX-10 || 2 GB Cellshock PC8500 D9GMH @ 600 (2.3v) 5/5/5/15/2T || 4 x 640gb WD sata II || HD4870 @ 775 - 1000 || CM Stacker STC-01 + 4 Yarte Loon D12SL || Enermax modu82+ 625W || Audigy2 ZS || Logitech Z-5500D || Lacie Electron22BlueIV 22"
its also depending on your board tomati, you need a good board to bench 1g+ cl7
but ya the sticks are amazing
I got my 2 x 1G kit today too ( Diablo 2000 ), but they are with D9GTR .
Will test them later.
-------------------------------------------------------------------------------------------------------------------------------
3Dmark2006 Score Calculator
---------------------------
"Frequency Unlimit -Enabled'' by DFI
doesn't mean they are bad m3kk
Try 7-6-5-18 not 7-6-5-15 at 2GHz+. These IC's doesn't like very low TRAS at high speeds. And yes, good board and lots of voltage for MCH is a must for 2GHz cl7.
Bookmarks