thanks SeLecT! guess it is applicable to other DFI boards as well
EDIT: just re-checked Clunk's post in his review & noticed this:
The following pictures are based on DFI's marketing literature for the Auto Boost System which they launched at Computex 2008.
Last edited by emoners; 06-27-2008 at 06:58 PM.
Me wants!!!
good upgrade from a p5e-vm hdmi?
mmmmmmmm 4870 cf
Originally Posted by skinnee
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Has anyone been able to go past the 500FSB?
I dont know if i should wait longer of just buy the Biostar TPower IP45 board now
No, nobody reached 500Mhz... the highest FSB i've seen is 450Mhz.
We all hope for a new bios!
i have see 480
Now the DK is available in my country too. But for 10-15$ more I can buy the DFI LanParty UT P35-TR2 or the DFI LanParty DK X38-TR2B.
The UT P35 temps me because it has digital PWM, 2xGigabit Lan,a full heat pipe and I think an overall better build quality.
But the DK P45 Has 16x PCI-E 2.0, lower power consumption and supposedly better overclocking capabilities.
Don't care much about the DK X38.
Damn this is thought.Any advices guys?
ooohhh..... new record?i have see 480
P45 CF is at x8 mode doesn't look good to CF with P45...
can you copy the software from the cd and upload/email it?It is a software. Here is a screenshot of it. But i don't know how it works
And you see the a list of DFi-Boards which you can choose.
Praetor
» Intel i7 2600K 3103B306 » Asus Maximus IV Extreme-Z » Asus GTX 470's TRi-SLI » Corsair Dominator GT CMT4GX3M2A2000C8 » Corsair Force F180 SSD » Corsair AX1200 PSU » Corsair 800D
» Cooling : Swiftec Apogee XT » Swiftec MCP350-DDC1 w/XSPC Dual DDC Bay Reservoir » Swiftech MCR320-QP w/Scythe SlipStreams 110CFM
The Yamato
» Intel i7 920 3849B028 or i7 980X » Asus Rampage III Extreme Black Edition » Asus HD6970's QuadFireX or Asus GTX 570's 4way SLI » 6GB Corsair Dominator GT TR3X6G1866C7GTF » Corsair Force F180 SSD » Corsair AX1200 PSU » Microcool Banchetto 101
» Cooling : Dragon F1 Extreme Edition(LN2) » Custom SS by RunMc »
Email it noMaybe upload it but is the software enough ? Doesn't it require a supporting bios?
E8400 Q746A| 2Gb Gskill Micron D9GMH | DFI LanParty P35 DK T2R/S | Sapphire X1950PRO | Antec Nine Hundred | Tuniq Tower |
/ E8400 @ 4752 @ 1.664v/ AIR / 9.734 spi /
/ G.Skill @ 1200 4-4-4-9 @ 2.52v /
/ G.Skill @ 900 3-3-3-3 @ 2.45v /
// Smart Guardian Skin DFI LanParty DK P35 //
which is what I'd like to find out.Email it no
Praetor
» Intel i7 2600K 3103B306 » Asus Maximus IV Extreme-Z » Asus GTX 470's TRi-SLI » Corsair Dominator GT CMT4GX3M2A2000C8 » Corsair Force F180 SSD » Corsair AX1200 PSU » Corsair 800D
» Cooling : Swiftec Apogee XT » Swiftec MCP350-DDC1 w/XSPC Dual DDC Bay Reservoir » Swiftech MCR320-QP w/Scythe SlipStreams 110CFM
The Yamato
» Intel i7 920 3849B028 or i7 980X » Asus Rampage III Extreme Black Edition » Asus HD6970's QuadFireX or Asus GTX 570's 4way SLI » 6GB Corsair Dominator GT TR3X6G1866C7GTF » Corsair Force F180 SSD » Corsair AX1200 PSU » Microcool Banchetto 101
» Cooling : Dragon F1 Extreme Edition(LN2) » Custom SS by RunMc »
Ok. Maybe SeLecT or Clunk will upload the software. I want it too
E8400 Q746A| 2Gb Gskill Micron D9GMH | DFI LanParty P35 DK T2R/S | Sapphire X1950PRO | Antec Nine Hundred | Tuniq Tower |
/ E8400 @ 4752 @ 1.664v/ AIR / 9.734 spi /
/ G.Skill @ 1200 4-4-4-9 @ 2.52v /
/ G.Skill @ 900 3-3-3-3 @ 2.45v /
// Smart Guardian Skin DFI LanParty DK P35 //
dam i really dont know if i should buy this board now or the Biostar TPower IP45....any thoughts/suggestions?
Good i found this thread......
I got the same board about a week ago, needless to say, it won't let me budge an inch.
The C1E BIOS appears to be an uncompleted testing BIOS for the board.
Well, the DK P35-T2RS Suffered simillard problems when it was released, i hope that in a week or so we will see a new NORMAL bios instead of this lame joke.
I seriously doubt DFI would release a board that can't even handl 450mhz FSB easily.
Hell, even the P35 Bloodiron does that no sweat!
I had the TpowerI45 for a week. I needed to find a modified bios (not available from Biostar, got it from rebelshavenforums.com, bios 620) just to run a 9800GTX. Once I finally got that issue resolved other problems appeared. Getting the high FSB under more "normal" conditions was a challange. By normal I mean water cooling rather than LN2/dice/etc., lower FSB/NB voltages, and both cores enabled. I couldn't get 550FSB no matter what I did. And I was using a chip that I know is capable of 575FSB at least. It could have been this particular board and I believe that with Bios updates the board will be much better but that is no different than the Asus/Gigabyte/DFI P45 boards. My suggestion: unless you plan on trying for the 700+ FSB a very few people are getting I would go with an x48 chipset board. Certainly more expensive but much more user friendly IMHO.
Last edited by sofarfrome; 06-29-2008 at 04:07 AM.
ASUS P8P67 Pro Rev3; Intel 2600K; GSkill Ripjaws 1600 (2x4GB); XFX 5870; WD Black 500G x2 Raid0; Silverstone Striker 750W; SwiftechApogee-XT-TC PA120.3-Swiftech MP655; Lian Li G70B; Win7-64
------------------------------------------------------------------------------------------------------
The clueless don't even know they are.
Two things are infinite: the universe and human stupidity; and I'm not sure about the universe. -- Einstein
HEAT
I can upload it, but i don't know on which site. If you know one, tell me and i will do it
Filefront.com But you need an account. Or you can give it to me on Ymess and i'll upload it.
E8400 Q746A| 2Gb Gskill Micron D9GMH | DFI LanParty P35 DK T2R/S | Sapphire X1950PRO | Antec Nine Hundred | Tuniq Tower |
/ E8400 @ 4752 @ 1.664v/ AIR / 9.734 spi /
/ G.Skill @ 1200 4-4-4-9 @ 2.52v /
/ G.Skill @ 900 3-3-3-3 @ 2.45v /
// Smart Guardian Skin DFI LanParty DK P35 //
http://www.muenster.de/~e30pics/Dateien/ABS.rar
Here you can download the ABS-Tool. Thanks to Chrisch for uploading it!
Thanks
E8400 Q746A| 2Gb Gskill Micron D9GMH | DFI LanParty P35 DK T2R/S | Sapphire X1950PRO | Antec Nine Hundred | Tuniq Tower |
/ E8400 @ 4752 @ 1.664v/ AIR / 9.734 spi /
/ G.Skill @ 1200 4-4-4-9 @ 2.52v /
/ G.Skill @ 900 3-3-3-3 @ 2.45v /
// Smart Guardian Skin DFI LanParty DK P35 //
No problem.
It works. I backed up my bios settings.
Last edited by alex17 GTX; 06-29-2008 at 08:23 AM.
E8400 Q746A| 2Gb Gskill Micron D9GMH | DFI LanParty P35 DK T2R/S | Sapphire X1950PRO | Antec Nine Hundred | Tuniq Tower |
/ E8400 @ 4752 @ 1.664v/ AIR / 9.734 spi /
/ G.Skill @ 1200 4-4-4-9 @ 2.52v /
/ G.Skill @ 900 3-3-3-3 @ 2.45v /
// Smart Guardian Skin DFI LanParty DK P35 //
yeah ^^it's far of biostar p45 motherboardooohhh..... new record?
There is a new bios on the page. It is from the 18th of june, but nothing is better...
Someone can host the SmartGuardian program please?
Thx
PH.II X2 545@X4 B45
Asus Crosshair III 1003
4Gb G.Skill Ripjaws
Full @ir cooling sys
If you need it for your DK P35 i already modified it and look like DK P45's smart guardian. Here it is.
E8400 Q746A| 2Gb Gskill Micron D9GMH | DFI LanParty P35 DK T2R/S | Sapphire X1950PRO | Antec Nine Hundred | Tuniq Tower |
/ E8400 @ 4752 @ 1.664v/ AIR / 9.734 spi /
/ G.Skill @ 1200 4-4-4-9 @ 2.52v /
/ G.Skill @ 900 3-3-3-3 @ 2.45v /
// Smart Guardian Skin DFI LanParty DK P35 //
Reply With Quote
Bookmarks