I did but before first boot so no before/after results. Way too much white paste on and all around NB stock...
Where do i find smartguardian (or skin) as the one by Select in post #50 ??
Last edited by Viss; 09-09-2008 at 07:04 AM.
***** Visit us on PCWorld.fr *****
This mobo doesnt like my good set of crucials. I have 2sets, one did bench SPI 1m @687mhz 5-5-5-18 the other set doesnt bench as high.
It wont boot at all with the ''good'' set of ram in dual channel but boots in single channel.That set did 600mhz 4-4-4-4 on my other board
With the other set boots fine but every time oc fails i get C1 code, have to reset CMOS allthe time
Seems i cant go past 657fsb so could be the ram i guess .
Could someone be kind enough to upload abs utility and latest smartguardian here? i've lost my CD
645 FSB done with E8400 Q805 /all air. Awesome board.
I have an offer to buy the non-PLUS board for $135. Kinda cheap, but is this version still FSB-limited at 500 or so? I have a DFI X48 LT T2R already, no use getting the P45 DK non-PLUS if it can't go higher (the X48 did 540 on air, the previous owner told me).
hi guys, what's the difference between PLUS version and NON PLUS version on T2rs mb ? thank you
Maximus III Formula - i7 860 4Ghz - 4 GB Gskill Ripjaws 2Ghz - Powercolor 5850 1000/1250 VF3000A - XFI Titanium Fatality - WD3200AAKS RAID 0 - Maxtor 500 Gb - Wd 5000AAKS - Enermax 625W modu82+ - Case CM690 - CM TX3
Not even sure what the actual difference is but for that $5 extra id get Plus just in case.
Regarding the DFI LANPARTY DK P45-T2RS PLUS
Any chance of some quadcore clocking results? i.e. Q9550/Q9650 or QX9650.
Thanks.
i5 2500K @ 4.9GHz MSI Z77 MPower G.Skill Trident 8GB 2400C10
EVGA GTX 1070 SC 8GB @ 1784/4004MHz Corsair HX 750 PSU
Samsung 830 256GB Creative ZxR Thermalright Silver Arrow
NEC 24WMGX3 24" TFT Fractal Design Define S Win 7/10 64bit
Engineers from DFI: guide to overclock for P45
i7 920, Zalman CNPS10X Flex, DFI LP DK X58, 3x1024 Corsair 1333 MHz, EVGA GTX460 FTW 1024MB, Hitachi 40/120/320/500 GB, Recom PWS-EVO-BW, Sirtec 500W old style, HP P275 21"
gah. Having serious issues on this board. Cant hit over 449 fsb without extreme voltage. Running an E0 E8500 which I cant stabilize even at 4Ghz. >_< Wheres the magic bios setting to correct this problem
i7 920 | Asus Rampage II gene | 6GB ocz Blade | 4870x2
I know it's a screamer for 1m, but can anyone get an efficient 32m score on this board? Say approx 12min @ 6x600?
Just curious cuz it's real tempting.
Is it possible to boot from a USB stick with this board? There seems to be some options to do it but I can't get them to work.
Edit: Figured it out. Switch USB Drive boot from Auto to HDD. Then switch Drive boot priority.
I"m hitting a strange fsb wall on q9550. 476 post and boot windows fine but 477 = totally no post. anyone have any idea why?
Having issues 500FSB +. Have tried all the settings other people have used. My crucial ballistix D9 have gone flaky so im using some promos. I have 3 sets of ram I have tried and at times I cant even get them to run stock frequency. Picky board?
Using :
E8500 E0
D9GMh/promos/powerchip ram.
PS. whats a Safe FSB termination voltage to use?
This was very unstable :
Last edited by nzbleach; 09-14-2008 at 04:13 AM.
i7 920 | Asus Rampage II gene | 6GB ocz Blade | 4870x2
Perhaps you've found the FSB hole that exits on intel boards. I can be different for every mobo + proc combo. This is a known 'problem' since the introduction of the CD2 architecture
You should see if you can do 478, 480 , 485, 490, etc. It's trial and error , good luck
Proc: Q9650 9x496 @ 1.440v batch L844B703
Ram: 2x2GB OCZFlexII PC-9200 4:5 1240MHz 6-6-6-18 @ 2.12v
Mobo: Gigabyte EP45-UD3P rev 1.0 - bios F9b
Video: 2x Palit Dual Sonic HD4870 1GB in CF (840/4400)
PSU: OCZ PowerStream 520W + Thermaltake VGA 450W
HDD: 3x250Gb Barracuda 7.10 SATA2 Raid0 (ICHR10) 2x200Gb Barracuda 7.10 SATA2 Raid1 (ICHR10)
Audio: Audigy 4
Case: Dual Coolermaster Stacker; one for system rig and one for watercooling loop and cooling
[SIGPIC][/SIGPIC]
-Intel 3770K,
-Gigabyte Z77 UD5H,
-Gigabyte GTX 680 SLI,
-16gb Corsair Vengeance,
-SSD 128gb Kingston, 2×1TB Samsung F3,
-Corsair 1000W
-Z-5500@XONAR HDAV 1.3 DELUXE
Bookmarks